Processing » Canada

Search By Category

Search By Manufacturer

Search By Province

Building Filters

10382

Used Processing in Canada

  • Fume extractor

    Fume extractor

    • Manufacturer: Nedermann

    -Nederman Filter box -Shipping dimensions: 53" L x 37" W x 57" H -Lafert motor: 3 HP, 3495 RPM, 575 V, 60 hz, 3 ph

    $609 USD
    Brant, Canada
  • Lightnin Mixer

    Lightnin Mixer

    • Manufacturer: Lightnin

    -Volt: 110/220, Phase: 1, RPM: 1725, HP:1/4, AMPS: 5/2.5 -Shipping dimensions: 10" L x 10" W x 19 1/2" H -Motor model: MVF-R1451-1BS

    $797 USD
    Brant, Canada
  • 30 liters Stainless Tank

    30 liters Stainless Tank

      -Shipping dimensions: 29" L x 29" W x 57" H -Try clamp connections -Volume sight glass on side, with turn style nobs -Bottom valve is 1” -Bottom side valves .5” -Tank cleaner -Filling spout -Three stationary legs...

      Brant, Canada
    • Filter Regulator

      Filter Regulator

      • Manufacturer: Festo

      -Shipping dimensions: 2" L x 2" W x 4" H -Input/output: 1/2" -P1 max: 21 bar/300 psi -P2 max: 10 bar/145 Psi

      $33 USD
      Brant, Canada
    • Maglube In-Line Oiler

      Maglube In-Line Oiler

      • Manufacturer: Alliance Group inc

      Manufacturer: Alliance Group Inc -Model number: MAG3-9PV -Serial number: 12255

      $145 USD
      Brant, Canada
    • 450 Litres Poly Tank

      450 Litres Poly Tank

        -Shipping dimensions: 26 1/2" L x 26 1/2" W x 58" H -About 90 imp gallons

        Brant, Canada
      • 5,645 Litres cone bottom tank

        5,645 Litres cone bottom tank on four legs

          -Dimensions: 42" high x incline is 24" x 63.5" diameter -Shipping dimensions: 71" diameter x 87" total height with handles -2" draine -Half lid top -4 stationary legs

          $2,319 USD
          Brant, Canada
        • 2,273 Litres stainless steel open

          2,273 Litres stainless steel open top tank

            -Dome bottoms -4, 25" legs -Open top -2" tri clamp nipple at bottom -Dimensions: 61" tall x 54" -500 imp

            $3,117 USD
            Brant, Canada
          • 16,365 Liter Proceptor Double Tank

            16,365 Liter Proceptor Double Tank Oil/Water Separation System

              -Separates oil/grease from water (2) 3600 IG FRP tanks -10' dia x 9 1/2' straight side -12' overall height -7' 2" internal straight side -Skirted bottom, internal dish -Center drain to side discharge (6") -2' dom...

              Brant, Canada
            • 590 Liter Mixing Tank

              590 Liter Mixing Tank

                - Nord mixer on top: 2791 ratio, 63 speed - Nord motor: 1765-145 RPM, 230/460V, 5HP - Diameter is 34" -height is 40" -130 IMP - Overall height 81" -4 legs are 23" - Stainless steel - Chemical use - Dome bottom

                $4,494 USD
                Brant, Canada
              • Industrial bag filter from York

                Industrial bag filter from York fluid controls

                  -Shipping: length 16" x width 15" x height 37" -Flange diameter: 7 1/2" x 6" bottom

                  Brant, Canada
                • Trusted Seller
                  16" 1440 PSI Vertical Sour

                  16" 1440 PSI Vertical Sour Separator - 15524

                  • Manufacturer: Rushton Gas & Oil Equipment Ltd.

                  Field Run Rushton 16" x 7'6" 3-phase vertical sour 1440 PSI separator. 2" 600 ANSI RF inlet and outlet, as well as a 2" 600 ANSI Senior Meter Run. The separator comes equipped with a 6 5/8" x 30" 150 PSI fuel g...

                  Redcliff, Canada
                • Trusted Seller
                  36” x 10’ 1440 PSI

                  36” x 10’ 1440 PSI Sour Separator #16108

                  • Manufacturer: Platinum Energy Services

                  Pictures show the separator tied in. It has been since disconnected, drained and yard stored.

                  Redcliff, Canada
                • Trusted Seller
                  16" 1440 PSI Vertical Sour

                  16" 1440 PSI Vertical Sour Separator - 15509

                  • Manufacturer: Rare Oilfield Services
                  • Phase type: Three-phase

                  Diameter: 16" | Design pressure: 1440 PSI | Orientation: Vertical | Service: Sour | Length: 7'6" | Phase: 3 Phase | A#: 541585 | Crn#: P2437.213 | Inlet: 3" 600 ANSI RF | Outlet: 3" 600 ANSI RF | Sales gas: 3"...

                  Redcliff, Canada
                • Trusted Seller
                  1998 48" 100psi Sweet Vertical

                  1998 48" 100psi Sweet Vertical dual Separator

                  • Manufacturer: Kanbulo Industries Inc.

                  Packager: Kanbulo Industries Inc. | Service type: Sweet | Pasc condition rating: B | Skidded: Yes | Housed: Yes | Connection status: Connected | Vessel only: No | Separator type: dual | Diameter: 48" | Diameter(...

                  Buffalo, Canada
                • no-image_en.png

                  3M 7000 Packaging Machinery

                  • Manufacturer: 3M
                  • Model: 7000

                  Good condition 3M 7000 Packaging Machinery available between 2015 and 2017 years. Located in USA and other countries. Click request price for more information.

                  USA
                4142434445

                Overview

                Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

                FAQ

                What should I consider when buying used processing equipment?

                Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

                How do I arrange shipping for processing equipment?

                Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

                What is the typical maintenance for processing equipment?

                Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.