Processing » Canada

Search By Category

Search By Manufacturer

Search By Province

Building Filters

610

Used loading in Canada

  • Single bale 800HS

    Single bale 800HS

      The 800HS fully automated wrapper for square and round bales. The rotating rollers ensure an even rotation of the bale and the efficient application of the film. Versatile too, with a simple adjustment the squar...

      Chesterville, Canada
    • Single bale 590HS

      Single bale 590HS

        Make sure all your hard work does not go to waste, wrap individual silage bales with the 590HS. The aluminium stretchers maintain a consistent stretch, which maximises film usage. This model provides the most con...

        Chesterville, Canada
      • Trusted Seller
        INGERSOLL-RAND SSR UP6 25-150

        INGERSOLL-RAND SSR UP6 25-150

        • Manufacturer: Ingersoll Rand
        • Model: UP6-25-150
        • Phase type: Three-phase

        Cfm: 92 cfm | Compressor air type: Rotary Screw | Power type: Electric | Max. pressure: 150 psi | Mount: Portable | Tank size: 120 Gal. | History - hours: 47922 | History - load hours: 18193 | Horsepower: 25 hp ...

        $7,895 USD

        Get financing

        Est. $155/mo

        British Columbia, Canada
      • Twin Auger A700FD

        Twin Auger A700FD

          The pull type twin auger A700 mixer (conveyor discharge) is designed for intensive daily use. These mixers are adaptable depending on the configuration of the operation and the type of farming . The solution for ...

          Chesterville, Canada
        • Trusted Seller
          2016 GARDNER-DENVER VS45-70A25

          2016 GARDNER-DENVER VS45-70A25

          • Manufacturer: Gardner Denver
          • Model: VS45
          • Phase type: Three-phase

          Manufacturer PDF Dimensions: Cfm: 308 cfm | Compressor air type: Rotary Screw | Power type: Electric | Max. pressure: 100 psi | Mount: Skid Mounted | History - hours: 24,586 | History - load hours: 12,458 | Horse...

          $15,822 USD

          Get financing

          Est. $311/mo

          British Columbia, Canada
        • Trusted Seller
          2009 ATLAS COPCO GA315

          2009 ATLAS COPCO GA315

          • Manufacturer: Atlas-Copco
          • Model: GA 315
          • Noise level: 76 dB

          Capacity: Max working pressure: Cfm: 2013 | Compressor air type: Rotary Screw | Power type: Electric | Max. pressure: 132 psi | Mount: Skid Mounted | History - hours: 24,448 | History - load hours: 7,632 | Voltag...

          $57,625 USD

          Get financing

          Est. $1,085/mo

          British Columbia, Canada
        • Trusted Seller
          2009 ATLAS COPCO GA315

          2009 ATLAS COPCO GA315

          • Manufacturer: Atlas-Copco
          • Model: GA 315
          • Noise level: 76 dB

          Capacity: Max working pressure: Cfm: 2013 | Compressor air type: Rotary Screw | Power type: Electric | Max. pressure: 132 psi | Mount: Skid Mounted | History - hours: 26,387 | History - load hours: 12,846 | Horse...

          $57,625 USD

          Get financing

          Est. $1,085/mo

          British Columbia, Canada
        • Twin Auger A920FD

          Twin Auger A920FD

            Twin auger vertical TMR mixer. Capacity 920 ft3 (26.1 m3) to 1172 ft3 (33.2 m3). Height of 122 in (3.1 m) to 140 in (3.56 m) with extension. 2 augers with 8 reversible knives each in carbide tungsten (12 knives p...

            Chesterville, Canada
          • Twin Auger A920ST

            Twin Auger A920ST

              Twin auger vertical TMR mixer. Capacity 920 ft3 (26.1 m3) to 1172 ft3 (33.2 m3). Height of 122 in (3.1 m) to 140 in (3.56 m) with extension. 2 augers with 8 reversible knives each in carbide tungsten (12 knives p...

              Chesterville, Canada
            • Single Auger A450ST

              Single Auger A450ST

                A450dt (side trap discharge) Capacity from 450 ft3 (12.8 m3) to 600 ft3 (17 m3) HP PTO Requirement: in low speed: minimum 60 HP in high speed: minimum 85 HP Height of 112 in (2.84 m) to 130 in (3.3 m) with extens...

                Chesterville, Canada
              • Twin Auger A520ST

                Twin Auger A520ST

                  The Anderson pull type A520 twin auger mixer (side trap discharge) has the ability to mix the widest variety of ingredients. Process large amount of hay, even complete square and round bales of baleage. Available...

                  Chesterville, Canada
                • Single Auger A450FD

                  Single Auger A450FD

                    A450FD (conveyor discharge) Capacity from 450 ft3 (12.8 m3) to 600 ft3 (17 m3) HP PTO Requirement: in low speed: minimum 60 HP in high speed: minimum 85 HP Height of 112 in (2.84 m) to 130 in (3.3 m) with extensi...

                    Chesterville, Canada
                  • Single Auger A380FD

                    Single Auger A380FD

                      The Anderson pull type single auger A380 mixer (conveyor discharge) with side trap discharge, will meet todays needs for high output and intensive use. It has been developed for farms where the footprint of the m...

                      Chesterville, Canada
                    • Trusted Seller
                      INGERSOLL-RAND IRN100HOF

                      INGERSOLL-RAND IRN100HOF

                      • Manufacturer: Ingersoll Rand
                      • Model: IRN100H-OF
                      • Phase type: Three-phase

                      CFM Ratings: 435 @ 100 psig 400 @ 125 psig 368 @ 150 psig

                      $36,016 USD

                      Get financing

                      Est. $678/mo

                      British Columbia, Canada
                    • Trusted Seller
                      Combi Case Erector/Bottom Sealer

                      Combi Case Erector/Bottom Sealer

                      • Manufacturer: Combi

                      AFA Systems uses a Combi case erector/bottom sealer with a manual load station. The case erector features a bottom tape closure and a product infeed conveyor for operators to manually load cases. The system’s com...

                      Brampton, Canada
                    56789

                    Overview

                    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

                    FAQ

                    What should I consider when buying used processing equipment?

                    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

                    How do I arrange shipping for processing equipment?

                    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

                    What is the typical maintenance for processing equipment?

                    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.