Processing » Canada

Search By Category

Search By Manufacturer

Search By Province

Building Filters

737

Used filter in Canada

  • UV Lamp

    UV Lamp

      -4" tri clamp included - immersion to tank Characteristics: Industrial Process + Tanks, Sanitary Process Equipment, Water Treatment, Stainless Steel | Price (cdn$): $384.00

      $280 USD
      Brant, Canada
    • Zenit Plat Filtration

      Zenit Plat Filtration

        -Shipping dimensions: Height 32” x Length 53” x Width 24” -The plates are 15”x15” and 5/8 thick -Inlets and outlet ports are 1” -Type: V4030 -Nn: 52003 -Baijahr: 1974

        $2,038 USD
        Brant, Canada
      • Particulate filtration Circulation system

        Particulate filtration Circulation system

        • Manufacturer: Filmax

        -230/460 Volts 3 PH , 2/1 Amps -.5HP -1725 RPM -Dimensions: 48" Length x 40" Width x 36" Height -Circulation pump through filter unit, was used for fine oil

        $597 USD
        Brant, Canada
      • Trusted Seller
        Used Filter Press, Recessed Plate,

        Used Filter Press, Recessed Plate, 900 mm X 900 mm, Polypropylene

          -plate size: 900mm x 900mm -11 polypropelene non gasketed plates -four 1.5'' corner holes -center hole: 4'' -with box of new filter clothes -mounted on casters -with stainless steel drip pan -manufacturer:...

          Saint-Jérôme, Canada
        • Trusted Seller
          ABEKAS AIR CLEANER

          ABEKAS AIR CLEANER

          • Manufacturer: ABEKAS

          ABEKAS, AIR CLEANER, PROFANITY ELIMINATION DELAY SYSTEM WITH PANIC BUTTON CONTROL (2 AVAILABLE)

          Toronto, Canada
        • Trusted Seller
          Used Eimco Filter Press, Recessed

          Used Eimco Filter Press, Recessed Plate, Gasketed, 470 Mm X 470 Mm, Polypropylene

          • Manufacturer: Eimco

          -manufacturer: eimco -capacity: 1.5 cubic feet approx. -plate size: 470 mm x 470 mm -8 polypropylene gasketed plates -with stainless steel piping and ball valves -one 2" center hole, four 1.25" corner holes

          Saint-Jérôme, Canada
        • Trusted Seller
          Used Perrin Filter Press, Recessed

          Used Perrin Filter Press, Recessed Plate, Gasketed, 470 Mm X 470 Mm, Polypropylene

          • Manufacturer: Perrin

          -manufacturer: Perrin -capacity: 3 cubic feet approx. -plate size: 470 mm x 470 mm -14 polypropylene gasketed plates -one 2" center hole, four 1.25" corner holes

          Saint-Jérôme, Canada
        • Trusted Seller
          0-100 PSI Gauge

          0-100 PSI Gauge

          • Manufacturer: Diamond Bilt

          2” Dial, ¼” MNPT Weight: 16 oz

          Pickering, Canada
        • Trusted Seller
          Air Switch

          Air Switch

          • Manufacturer: Seal-Rite

          Air Switch for Air-Operated Spray Bars Compatible with all Seal-Rite spray bars

          Pickering, Canada
        • Trusted Seller
          Used Duriron Pressure Leaf Filter,

          Used Duriron Pressure Leaf Filter, 21 Sq.Ft.

          • Manufacturer: Duriron

          -manufacturer: Duriron -model: 24HC2 -shell mawp: 85 psi @ 150 deg.f -national board no.3771 -capacity: 21 square feet -24'' diameter -seven (7) plates: 18'' x 14'' -slurry inlet: 2'' -outlet: 2'' -solid...

          Montreal, Canada
        • Trusted Seller
          Used Scepter Cross Membrane Filtration

          Used Scepter Cross Membrane Filtration System

          • Manufacturer: Scepter

          -manufacturer: scepter (2001) -model: 14C-750A-10P4 -serial no. 01-1214 -national board no. 1178 -shell side mawp: 150 psi @ 250 deg.f -number of tubes : 140, 12'6'' long, 18'' shell diameter -inlets & outl...

          Saint-Jérôme, Canada
        • Trusted Seller
          Used Pall Centramate CM500S Tangential

          Used Pall Centramate CM500S Tangential Flow Filtration System

          • Manufacturer: Flow

          -serial no. 04.00275.01 -max working volume (5 l) -min working volume (170 ml) -pressure range: 0 to 87 psi -temperature range: 0 to 45 deg.c (32 deg.f to 113 deg.f) -flow rate: 15 to 600 l/hr -power requir...

          Saint-Jérôme, Canada
        • Trusted Seller
          Used Alloy Hardfacing Gravity Separator,

          Used Alloy Hardfacing Gravity Separator, 9000 Gallons

          • Manufacturer: Alloy

          -capacity: 9000 gallons -with two stainless steel screw conveyors -each motor is: 0.3 hp, 575 volt, 1725 rpm -reducer ratio: 375/1 -output rpm: 5 approx. -material of construction: stainless steel -overall ...

          Saint-Jérôme, Canada
        • Trusted Seller
          Strassburger filter press #5429

          Strassburger filter press #5429

          • Manufacturer: Strassburger

          STRASSBURGER Filter Press Model SF 800 ODPC CIP. Year 2016, 460 volts.

          Québec City, Canada
        • Trusted Seller
          Used Bag Filters (QTY: 8)

          Used Bag Filters (QTY: 8)

            8 Stainless Steel Filter Bag Housings - Piped in Parallel and/or Series. Differential pressure sensors and individual piping to replace filter bags while running continuously. Last used in protein manufacturing p...

            Winnipeg, Canada
          910111213

          Overview

          Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

          FAQ

          What should I consider when buying used processing equipment?

          Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

          How do I arrange shipping for processing equipment?

          Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

          What is the typical maintenance for processing equipment?

          Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.