Used valve in Catalonia, Spain

1998 IPROCOMSA B-1000

• Manufacturer: IPROCOMSA

1000 liter V-shaped mixer manufactured by Iprocomsa in stainless steel mounted on a stainless steel lined structure with butterfly valve. Pneumatic vibrator at the bottom of the cone. With Documentation and elect...

STAINLESS STEEL SIPHON TRAP

Used siphonic seal manufactured in stainless steel. Dimensions:

2018 Ist PN-S 2500 PLUS

• Manufacturer: IST

Ref. OT31- USED IST PN-S 2500 PLUS, year 2018 Manufacturer: IST Year: 2018 Pneumatic pump

2009 NETSTAL 4200K - 3700E

• Manufacturer: Netstal

Air valves: 4 | Clamping force: 0kn | Core pulls: 2 | Distance between tie-bars (h x v): 713 x 713 mm | Mould height max: 950 mm | Mould height min: 600 mm | Operating hours: 106.350 | Screw diameter: 80 mm | Sc...

2006 ARBURG 470 C 1500 - 350 ADV

• Manufacturer: Arburg
• Model: 470 C

Clamping force: 1.500 kN | Air valves: 2 | Core pulls: 1 | Dimensions (long x wide x high): 7.000 x 2.100 x 2.300 mm | Distance between tie-bars (h x v): 470 x 470 mm | Injection volume: 139 cm³ | Mould height ...

2015 WAVE SWISS 3000

• Manufacturer: WAVE SWISS

Screw diameter: 190 mm | Cascades / sequential valve gates: 8 | Clamping force: 30.000 kN | Core pulls: 2+2 (Pneumatic) + 3+3 (hydraulic) | Distance between tie-bars (h x v): 2.200 x 1.800 mm | Heating zones: 16...

2003 LS LGH2500M

• Manufacturer: LS

Screw diameter: 140 mm | Air valves: n/a | Cascades / sequential valve gates: n/a | Clamping force: 25.000 kN | Control: HICOM-5000 | Core pulls: n/a | Daylight between platens max: 3.600 mm | Dimensions (long x...

2004 ENGEL DUO 11050 / 2300

• Manufacturer: Engel

Clamping force: 23.000 kN | Cascades / sequential valve gates: 10 | Core pulls: 2 | Distance between tie-bars (h x v): 2.000 x 1.600 mm | Heating zones: 36 | Injection pressure: 1.600 bar | Injection volume: 8.8...

2013 KRAUSS MAFFEI KM50-180AX

• Manufacturer: Krauss-Maffei

Clamping force: 0kn | Air valves: 2 | Control: MC5 | Core pullers: 2 | Dimensions (long x wide x high): 4.400 x 1.600 x 1.900 mm | Distance between tie-bars (h x v): 410 x 360 mm | Heating zones: 10 | Injection ...

2016 FERROMATIK K-TEC 450 S

• Manufacturer: K-Tec

Air valves: 4 | Clamping force: 0kn | Distance between tie-bars (h x v): 825 × 825 mm | Dry cycle time: 3 - 578 sec/mm | Ejector stroke / force max.: 85 / 200 mm / kN | Injection pressure: 1.921 bar | Injection ...

2010 ENGEL E-MAX 440 / 180 PRO

• Manufacturer: Engel

Clamping force: 1.800 kN | Air valves: 2 + 2 | Control: CC200 | Core pulls: 0 | Daylight between platens max: 1.060 mm | Dimensions (long x wide x high): 5.400 x 1.400 x 2.000 mm | Distance between tie-bars (h x...