Used Processing in New Zealand

2021 Spiral Conveyor

Spiral Conveyor that was used for drying petfood products (used Heating System 15540s), YOM 2021, 6.8amp motor, belt width 400mm, height clearance 140mm, exit height 2500mm, entry height 900mm, 8 layers, belt len...

Conveyor - Belt

Belt Conveyor, 3 ph geared motor, 0.75hp, Intralox belt, on wheels, inclined, infeed is approx. 250mm H, outfeed height is approx. 900mm. Belt approx. 4200mm L x 380mm W.

2014 Shrinkbox/Wrapper

EKH-455 Shrink Box/Wrapper, YOM 2014, single phase, sealing dimension: 420mm D x 550mm L, maximum height of package 250mm, maximum dimension of film 600mm x 250mm Ø. O’all dims approx. 1310mm L x 810mm W x 1200mm H.

UV Tunnel

UV Tunnel, with an infeed conveyor (no outfeed conveyor), designed for UV sterilization of 20-25kg bags. UV Tunnel has under and over lights. Joyea JP932 Infeed Conveyor – entry height 740mm, outfeed height 880mm...

Rotary Sieve

Rotary Sieve, stainless steel, 3 ph, start/stop/e-stop controls, bag dump station with dust hood (can connect dust collector hose) and auger infeed, safety grate, inspection door on drum, pneumatic seal on bearin...

Carton Machine

CHENGXIANG Carton Machine, single phase, pneumatic, production speed up to 50 cartons/min, designed to build a box, fold a pamphlet for each box, put a bottle and the pamphlet in the box, and close the box. Size ...

Printed Electronics Dryer

Adphos NIRLAB is a turn-key (Infra red) drying and curing system for research and development or prototype production of printed electronics with inks applied via flexographic, screen, gravure or inkjet printing....

2009 Encapsulator

• Manufacturer: MG2

MG2 Planeta 100 Encapsulator, made in Italy, YOM 2009, 3 ph, 14kw, up to 100,000 capsules/hr, with tooling for capsule size 3, fitted with 2 x powder low dosage units, suitable for dosing powder for inhalation. M...

Air Compressor

JUBA Oil Free Air Compressor, 3 ph, on wheels, start/stop controls, 6kw, 1380rpm, 0.7MPa, 520L/min, 160L built in air receiver. Approx. 1350mm x 360mm x 850mm H.

Conveyor - Belt

Belt Conveyor, inclined, single phase, no lead or plug, green belt, belt could do with being replaced, stainless steel frame. Infeed ht 560mm, outfeed ht 900mm, belt – 283mm W x 2990mm L.

2007 Ice Maker

Beluga BT10000 Slurry Ice Maker, YOM 2007, design pressure 1.56MPa, design temperature -30/+35 degrees Celsius.

2017 Tray Packer (auto)

END320 Tray Packer (Auto), YOM 2017, 3 ph, 32 amp plug, pneumatic (100+cfm air supply preferred), current tooling does 4 trays per cycle and has 2 cavities for the goods, approximately 40-50 trays per minute, hot...

Air Handling Unit

• Manufacturer: Temperzone

Temperzone Clever AHU MC100 Air Handling Unit, with condenser, heat pump controller and ducting (if required). Owner will keep VSD as this operates other equipment as well. Approx. 2 years old, serviced every 3 m...

Labeller

KOSME Labeller, wet gum unit, 2 head, for front and back labelling, previously used to label Champagne bottles, last used approx. 2 years ago. Needs some work to put it back together.

Tank - S/S - 1000L

Truscott Stainless Steel Tank, enclosed, single skin, side manhole, stirrer, internal element (condition of element unknown), central bottom outlet – 35mm, o’all dims approx. 1300mm x 1350mm x 2170mm H. Approx. 1...