Used Processing in Hamburg, Germany

2004 PELLEGRINI DF 2500
- Manufacturer: Pellegrini
- Model: DF2500
Fixed wire saw Pellegrini DF 2500 with fixed diamond wire Pellegrini DF 2500 with portal diamond wire Electrically rotating carriage Voltage: 380 Hz 50 V More used machines at: www.janssen-usedmachines.com New st...
Hamburg, Germany
Ketmak Wasseraufbereitung/Water treatment -
- Manufacturer: Ketmak Wasseraufbereitung/Water treatment
Complete water treatment/filter press with clarification tower Filter plates 800 x 800 mm, 17 pieces 5,000 liters circulation per minute Only in operation for 1 year More used machines at: www.janssen-usedmachine...
Hamburg, Germany
2018 SIMEC Pilot 2200 20N-10GS-G
- Manufacturer: Simec
Resin coating line for slabs Year of construction 2018, installed 2022 Working hours: 100 Burner supply: methane Number of floors: 10 drying, 20 catalysis Voltage V. 400 Hz 50 More used machines at: www.janssen-u...
Hamburg, Germany
2005 Montresor Lola 1000-
- Manufacturer: Montresor
- Model: Lola 1000
Edge polisher machine for straight edges Number of polishing spindles: 8 Number of chamfering spindles: 4 Working thickness: 60 or 100 mm Working direction: from right to left Complete with: - Calibrator - Drip n...
Hamburg, Germany
2003 Montresor LUNA 640-
- Manufacturer: Montresor
- Model: Luna
EDGE POLISHERS No. 6 polishing heads No. 2 diamond bevel units No. 2 bevel unit with grinding wheels No. 1 blade cutting unit No. 1 drip cutting unit More used machines at: www.janssen-usedmachines.com New stone ...
Hamburg, Germany
2006 GMM Tecna 36 Spezial
- Manufacturer: GMM
- Model: Tecna 36
Bridge saw X-axis 3600 mm Z-axis 400 mm Y-axis 3500 mm Saw blade diameter 725 mm Manual lathe More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de
Hamburg, Germany
1989 Arbes STH 140-25-
- Manufacturer: Arbes
Gang saw Maximum block size is 3000 x 1800 mm Maximum 26 blades Push rod stroke 750 mm Main motor has 55 kW and operates at approximately 65 strokes per minute. Lowering speeds range from 0 to 300 mm per hour. Wa...
Hamburg, Germany
2002 Marmo Meccanica LTH 7212-
- Manufacturer: Marmo Meccanica
- Model: LTH 7212
Edge polisher machine for straight and round edges Calibrator / water nose Chamfers inclined at 45° (diameter 120-130 mm) 7 polishing heads Additional lower chamfer inclined at 45° (diameter 120-130 mm) 2 rollers...
Hamburg, Germany
2006 PELLEGRINI DF 2000 top-
- Manufacturer: Pellegrini
- Model: DF2000
Wire saw overhauled (pictures not yet overhauled) The overhaul includes: Sandblasting Painting Replacement of bearings, nuts, seals, pipes (and everything that goes with it) Overhauled trolley Repair of hubcaps T...
Hamburg, Germany
1961 Hensel/Burkhardt Brückensäge 113A-
- Manufacturer: Burkhardt-Hensel
Bridge saw Cutting depth 270mm Cutting length approx. 4000mm Table surface 2500mm x 1000mm Two new blades (630mm) Three used blades (700mm) New cutter (d=350mm / wide 30mm), Steel foundations for screwing on More...
Hamburg, Germany
2006 Donatoni QUADRIX SPD-
- Manufacturer: Donatoni
- Model: Quadrix
Bridge saw Saw blade head inclination from 0-180° for carrying out: - Longitudinal cuts - Transverse cuts - Diagonal cuts - Shaping - Curves - Fixed table 3,500 x 2,100 mm in a stable steel construction. - Saw b...
Hamburg, Germany
2006 Donatoni QUADRIX DV
- Manufacturer: Donatoni
- Model: Quadrix
Bridge saw Rotatable sawblade holder (0–180°) for the following cuts: Rigid cuts Cross cuts Bevel cuts Shaped cuts Curved cuts Fixed table (3,500 x 2,100 mm) made of robust steel construction. Max. sawblade diame...
Hamburg, Germany
2009 BRETON Countourbreton NC 260 K 23-
- Manufacturer: Breton
- Model: NC260
CNC machining center 1-24 a new spindle was installed Tool magazine: 26 positions Steep taper, angle gear with saw blade and vacuum suction cup are supplied with the machine The machine is supplied with a 2nd ful...
Hamburg, Germany
2007 Intermac MASTER 23 M ( marble )
- Manufacturer: Intermac
- Model: Master 23
3-axis CNC machining center Including multiple suction cups and cones Machine bed size: 2500 x 1200 mm Z-axis: 275 mm Machine dimensions: L: 4700 mm W: 2680 mm, H: 2680 mm Electric spindle: 9.2 kW Max. electric s...
Hamburg, Germany
2009 MEC P 4 600x300 + 800x300
- Manufacturer: MEC
Stone splitting system 1. Stone splitting machine P4 600x300 built in 2009 T 42 2. Stone splitting machine P4 800x300 built in 2011 T 60 Pressure: Bar 315 More used machines at: www.janssen-usedmachines.com New s...
Hamburg, Germany