Processing » Connecticut

Building Filters

98

Used 3 phase in Connecticut, USA

  • Koolant Koolers KV-3000 Refrigerated Chiller

    Koolant Koolers KV-3000 Refrigerated Chiller 3 Hp Compressor 460V, 3 Phase

    • Manufacturer: Koolant Koolers

    Koolant Koolers Refrigerated Chiller Model #: KV-3000 S/N: 11925 Compressor Hp: 3 Pump Hp: 1.5 Refrigerant Type: R-22 460V, 3 ph @ 60 Hz

    $2,200 USD
    Manchester, CT
  • IMS LP-144-SC Granulator Grinder 7.5HP

    IMS LP-144-SC Granulator Grinder 7.5HP 208 Volt 3 Phase 22 Amps

    • Manufacturer: IMS

    Plastic Granulator Grinder 208 Volts 3 Phase 22 Amps 120 Control Voltage 7.5 HP

    Watertown, CT
  • 6" W. x 6' L.,

    6" W. x 6' L., Goessling, 6" x 74" high on incline 460 volts 3 phase

      GOESSLING USA CONVEYOR Serial No. 2090148 6" Steel Cleats 17" along floor x 74" High 9" X 17" Hopper separated at 12" 460 Volts 3 Phase .29 KW Motor Like New

      Thomaston, CT
    • Trusted Seller
      SWECO SCREEN FILTER

      SWECO SCREEN FILTER

      • Manufacturer: Sweco
      • Model: SCREEN

      MANUFACTURER: SWECO CORP. (USA) MODEL: TS18S Blower motor: 3 HP, 460 VOLT1800 RPM, 3 PHASE, 60 HZ.

      North Branford, CT
    • Trusted Seller
      T-M VACUUM PRODUCTS V-1G1200

      T-M VACUUM PRODUCTS V-1G1200

      • Manufacturer: T-M VACUUM PRODUCTS

      MANUFACTURER: T-M VACUUM OVENS OERLIKON LEYBOLD VACUUM FURNACE MODEL: V-1G1200-24

      North Branford, CT
    • DESPATCH

      DESPATCH

      • Manufacturer: Despatch

      SYSTEM CONSISTS OF (2) ELECTRICALLY HEATED 1250 F MAX PIT FURNACES (38"DIA X 48"DEEP, 48"DIA X 60" DEEP), AIR QUENCH TANK, WATER QUENCH TANK AND OVER HEAD CRANEWAY WITH CRANE (CRANE NEEDS REPAIR). PREVIOUSLY USED...

      Tolland, CT
    • Denray Machine 7200B Downdraft Sanding

      Denray Machine 7200B Downdraft Sanding Table 72"x48"

      • Manufacturer: Denray
      • Model: 7200B

      Downdraft Sanding Table Size: 72" x 48" 36" Tall "Jet Pulse" push button cleaning Rubber coated top Magnetic starter Located in Westbrook Maine

      Watertown, CT
    • HARPER

      HARPER

      • Manufacturer: Harper

      ATMOSPHERE BOX FURNACE WITH SIDE SWING DOOR, BRICK LINED INTERIOR AND ALLOY RETORT THAT CAN BE SEALED SO ONLY ATMOSPHERE GAS WILL BE IN THE RETORT. HEATING ELEM...

      Tolland, CT
    • DESPATCH

      DESPATCH

      • Manufacturer: Despatch

      DOUBLE DOOR OPENING WITH PRESSURE LATCHES AT BOTH FRONT AND REAR. ROOF MOUNTED HEATING ELEMENT CHAMBER WITH CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUC...

      Tolland, CT
    • DESPATCH

      DESPATCH

      • Manufacturer: Despatch

      DOUBLE DOOR OPENING WITH PRESSURE LATCHES AND ROOF MOUNTED REMOVABLE HEATING ELEMENT CHAMBER WITH CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF CREATIN...

      Tolland, CT
    • GEORGE KOCH

      GEORGE KOCH

      • Manufacturer: Koch

      DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEATING ELEMENT CHAMBER AND CIRCULATING FAN ARE MOUNTED ON THE ROOF. HETED AIR ENTERS WORK CHAMBER VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF CRE...

      Tolland, CT
    • DESPATCH

      DESPATCH

      • Manufacturer: Despatch

      DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. ROOF MOUNTED HEATING ELEMENT CHAMBER WITH CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF CREATING A COMB...

      Tolland, CT
    • JACKSON OVEN CO 45135

      JACKSON OVEN CO 45135

      • Manufacturer: JACKSON OVEN CO

      SINGLE SIDE SWING DOOR AT BOTH FRONT AND REAR. ROOF MOUNTED HEATING ELEMENT CHAMBER WITH CIRCULATING FAN AND POWER EXHAUST. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH ROOF CR...

      Tolland, CT
    • Trusted Seller
      2011 RAD-CON BELL ANNEALING FURNACE

      2011 RAD-CON BELL ANNEALING FURNACE FOR COPPER (14512)

      • Manufacturer: RAD-CON

      RAD-CON 2011 Bell Annealing Furnace for Copper. Natural gas powered, handles non-ferrous coils. Inside: 84" diameter, 70" height. Max temp: 1550°F. 480V, 30A, 3-phase. Operational with 3 retorts, gas manifold, an...

      North Branford, CT
    • PARK THERMAL

      PARK THERMAL

      • Manufacturer: PARK THERMAL

      UNUSED TOP LOAD SALT BATH PAINT STRIPPING FURNACE WITH TUBULAR TYPE HEATING, CIRCULATING MIXER , WORK BASKET. AND (7) 55 GALLON DRUMS OF UNUSED NITRATE STRIPPING SALT . NEW 2015 NEVER USED.

      Tolland, CT
    12345

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.