Processing » Connecticut

Building Filters

24

Used separator in Connecticut, USA

  • Trusted Seller
    Centrifuge, US Centrifuge, Model M512,

    Centrifuge, US Centrifuge, Model M512, 3 HP - #4749919

    • Manufacturer: US Centrifuge Systems

    U.S. Centrifuge M512 centrifuge with stainless steel rotor. Mounted on a stand and is equipped a 3 HP motor, switch and diaphragm pump. Capabilities include a maximum "G" force of 1500 and a solid holding capacit...

    Connecticut, USA
  • Trusted Seller
    SWECO SCREEN FILTER

    SWECO SCREEN FILTER

    • Manufacturer: Sweco
    • Model: SCREEN

    MANUFACTURER: SWECO CORP. (USA) MODEL: TS18S Blower motor: 3 HP, 460 VOLT1800 RPM, 3 PHASE, 60 HZ.

    North Branford, CT
  • Currier Polar S3 Chip Wringer

    Currier Polar S3 Chip Wringer Centrifuge Type 110lb 1200RPM

    • Manufacturer: Polar

    Centrifuge 2 Similar units available Make: Currier Polar Siener Bros. | Year built: 1966 | Capacity: 44 Gallon | Max load: 110 Lbs | Speed rpm: 1200 | Loads per hour: 12 | Motor hp: 3 | Supply voltage: 220v | Con...

    Watertown, CT
  • 7 Cubic Foot Sweco FMD7LR

    7 Cubic Foot Sweco FMD7LR Bowl ONLY

    • Manufacturer: Sweco

    This listing is for the bowl only. Great if your bowl or liner needs replacing. 48” round Channel is 13” wide Depth 13” Liner in good shape

    Watertown, CT
  • Polar Steiner Bro 44gal Centrifuge

    Polar Steiner Bro 44gal Centrifuge Type S3 110 Pound Cap

    • Manufacturer: Polar

    Centrifuge Make: Currier Polar Siener Bros. | Year built: 1968 | Capacity: 44 Gallon | Max load: 110 Lbs | Speed rpm: 1200 | Loads per hour: 12 | Motor hp: 3 | Supply voltage: 220v | Control voltage: 110v

    Watertown, CT
  • 2116366 Air/Oil Separator

    2116366 Air/Oil Separator

    • Manufacturer: Gardner Denver

    2116366 Air/Oil Separator - Designed for use with Gardner Denver Air CompressorsMake: Gardner Denver Model: 2116366Condition: NewSeries: Eliminator Air/Oil Separator Used With Gardner Air Compressors"original Spa...

    Watertown, CT
  • Torit 10Hp Cyclone Separator Dust

    Torit 10Hp Cyclone Separator Dust Collector Bag Type

    • Manufacturer: Donaldson / Torit / DCE

    Unit is out of service now but seller assures us it was a good working unit. Came from a Vocational School that was Consolidated into another District. On this unit complete with Box Stand , and (8) after filter ...

    Watertown, CT
  • Mattei BLADE-5-HHX 460v Rotary Vane

    Mattei BLADE-5-HHX 460v Rotary Vane Air Compressor Complete Set up

    • Manufacturer: Mattei

    Condition: Used, Overall in Excellent Shape. Has been Well Maintained with records. Currently not in Use. Extremely Quiet. BLADE 5s HHX Model is: 7.5 HP. 175 PSI Max. 22.7 CFM. 62 Db. ¾" NPT thread Comes ...

    Watertown, CT
  • 1988 MIDWESTERN INDUSTRIES Shaker Table

    1988 MIDWESTERN INDUSTRIES Shaker Table 12" W x 84" L Parts Separator

    • Manufacturer: MIDWESTERN INDUSTRIES

    Midwestern Industries Vibratory Shaker Table * 12" wide trough x 7' long * Duel vibratory electrical shakers * 240 / 480 Volt Shaker Motors - No controls * 420 Watt Motors - 5/8 Hp. 745 Watts to 1 hp. * Sturdy w...

    Watertown, CT
  • Trusted Seller
    Millipore Rotary Agitator For Hazardous

    Millipore Rotary Agitator For Hazardous Waste Pressure Filtration System, Model YT310RAHW

    • Manufacturer: Millipore

    The Millipore Rotary Agitator is a Hazardous Waste Filtration System, Model YT310RAHW is designed to separate solid and liquid phases of waste samples for analysis. Designed specifically for the US EPA Extraction...

    $3,950 USD
    East Lyme, CT
  • Trusted Seller
    Trinco Master Model 60X48SL/Deluxe

    Trinco Master Model 60X48SL/Deluxe

    • Manufacturer: Trinco

    The Trinco™ Master Model 60x48SL Deluxe Blast Cabinet delivers heavy-duty performance with rugged 14-gauge steel construction, bright LED lighting, and a spacious 60" x 48" work area. Equipped with a 600 CFM abra...

    Connecticut, USA
  • Trusted Seller
    2020 CMSHSS C5 Turbo Wire

    2020 CMSHSS C5 Turbo Wire Chopping System

    • Manufacturer: CMSHSS

    The 2020 CMSHSS C5 Turbo Wire Chopping System is a comprehensive setup designed for efficient processing of wire and cables. This used system includes several key components, starting with the CMSHSS-150GBH-1200 ...

    $715,000 USD
    Connecticut, USA
  • 6" W. x 6' L.,

    6" W. x 6' L., Goessling, 6" x 74" high on incline 460 volts 3 phase

      GOESSLING USA CONVEYOR Serial No. 2090148 6" Steel Cleats 17" along floor x 74" High 9" X 17" Hopper separated at 12" 460 Volts 3 Phase .29 KW Motor Like New

      Thomaston, CT
    • Lafranchi L1STD.20.22 Unscrambler Manufactured 2005

      Lafranchi L1STD.20.22 Unscrambler Manufactured 2005 Container Sorting Machine

      • Manufacturer: LaFranchi

      Made in Italy Currently located in Tinidad Riggers are required Approx. Dimensions 20ft x 20ft Has never been utilized at our plant work to separate and organize all types of containers into various sizes and sha...

      Watertown, CT
    • DESPATCH

      DESPATCH

      • Manufacturer: Despatch

      SYSTEM CONSISTS OF (2) ELECTRICALLY HEATED 1250 F MAX PIT FURNACES (38"DIA X 48"DEEP, 48"DIA X 60" DEEP), AIR QUENCH TANK, WATER QUENCH TANK AND OVER HEAD CRANEWAY WITH CRANE (CRANE NEEDS REPAIR). PREVIOUSLY USED...

      Tolland, CT
    12

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.