Processing » Denmark

Building Filters

45

Refurbished Processing in Denmark

  • Alfa-Laval AFPX 213XGP-74 concentrator unit

    Alfa-Laval AFPX 213XGP-74 concentrator unit

    • Manufacturer: Alfa-Laval
    • Model: AFPX-213

    Alfa Laval 3-phase centrifuge for stick water concentration. Motor: 18,5 kW, 50 Hz, 400 V This reconditioned centrifuge has been spin tested at 50 Hz after completely reconditioning in our work shop and vibratio...

    Hirtshals, Denmark
  • Alfa Laval AFPX 213-75S concentrator

    Alfa Laval AFPX 213-75S concentrator unit

    • Manufacturer: Alfa-Laval
    • Model: AFPX-213

    Alfa Laval 3-phase centrifuge for stick water concentration. Motor: 18,5 kW, 50 Hz, 400 V. This separator has now been spintested at full speed and vibration measurements on video has been performed. The vibrati...

    Hirtshals, Denmark
  • Alfa-Laval Contherm surface scraped heat

    Alfa-Laval Contherm surface scraped heat exchanger, 6 x 9"

    • Manufacturer: Alfa-Laval

    Rack with one reconditioned horizontal Contherm 6 x 9" surface scraped heat exchanger with 5,5 or 7,5 kW gearmotor. We can supply new rotors in different diameters, new scraper blades, new bearing houses, new rot...

    Hirtshals, Denmark
  • Alfa Laval MAPX309BGT-14 separator

    Alfa Laval MAPX309BGT-14 separator

    • Manufacturer: Alfa-Laval
    • Model: MAPX

    Completely reconditioned Alfa Laval fuel oil separator. Motor: 11 kW, 50 Hz, 380 V. Capacity up to 7.000 l/hour. Capacity is depending on feed flow, amount of water in the feed, sludge content and oil viscosity ...

    Hirtshals, Denmark
  • 1997 Alfa-Laval WSPX403 separator

    1997 Alfa-Laval WSPX403 separator

    • Manufacturer: Alfa-Laval
    • Model: WSPX

    Reconditioned WSPX403 separator - configurated as an concentrator - and normally used for removal of solids particles and tramp oils from wash water. This unit has a 2,2 kW motor - 380 Volt, 50 Hz, 3 phase. The...

    Hirtshals, Denmark
  • POLLRICH suction ventilator with 75

    POLLRICH suction ventilator with 75 kW motor

    • Manufacturer: POLLRICH

    POLLRICH ventilator with 75 kW motor. Type SH45/RU560R630/GR90 no: 46856 / 75123 This ventilator is now completely reconditioned with new bearings etc. Technical specifications: V: 7,22 m3/s, n: 1800 rpm, Nw: 40,...

    Hirtshals, Denmark
  • Aerzen blower GLa 10.2

    Aerzen blower GLa 10.2

    • Manufacturer: Aerzen

    Reconditioned Aerzen blower unit - in as new condition. Motor: 5,5 kW, 50 Hz, 380 V.

    $3,054 USD
    Hirtshals, Denmark
  • Alfa Laval VNPX 407SGP-34 separator

    Alfa Laval VNPX 407SGP-34 separator for juice, wine and beverage clarification.

    • Manufacturer: Alfa-Laval
    • Model: VNPX-407

    For juice, wine and beverage clarification and polishing. Hydraulic capacity (pure water) is around 7.000 l/hour. The separator will be delivered including set of tools and manual. Motor: 11 kW, 380 V, 50 Hz.

    Hirtshals, Denmark
  • Alfa Laval AVNX 719B-31G decanter

    Alfa Laval AVNX 719B-31G decanter centrifuge - sludge dewatering system

    • Manufacturer: Alfa-Laval

    Complete sludge dewatering system. The system consist of: Alfa Laval decanter unit AVNX719B-31G with automatic back drive system. Feed pump and flow meter Screw pump for dewatered sludge Flocculation unit fo...

    Hirtshals, Denmark
  • Alfa Laval VNPX 410S-34G separator

    Alfa Laval VNPX 410S-34G separator module for clarification of liquids

    • Manufacturer: Alfa-Laval
    • Model: VNPX-410

    This separator module is normally used for clarification of juice, wine, beverage, stick-water, soup and other liquids with smaller amount of suspended particles, that needs to be separated from the product. Oper...

    Hirtshals, Denmark
  • Alfa Laval AVNX 719B-31G –

    Alfa Laval AVNX 719B-31G – Reconditioned, as new

    • Manufacturer: Alfa-Laval

    Reconditioned Alfa Laval AVNX719B-31G decanter centrifuge for sludge dewatering. Capacity: approximately 140 kg/hour. I ex. 7 m3/hour with 2 % solids. Main motor: 22 kW, 50 Hz, 380 V, 3 phase. Bowl has steep co...

    Hirtshals, Denmark
  • AMENDUNI separator for olive oil

    AMENDUNI separator for olive oil purification, type A 87.

    • Manufacturer: Amenduni

    Complete reconditioned AMENDUNI separator, including 7,5 kW motor, manual and set of tools. Total weight: 1.050 kg. Bowl speed 6.800 rpm. Bowl volume: 9 liter Bowl sludge volume: 5 liter Bowl weight: 140 kg. Rate...

    Hirtshals, Denmark
  • Alfa-Laval NX 309S-31B

    Alfa-Laval NX 309S-31B

    • Manufacturer: Alfa-Laval
    • Model: NX

    Small Alfa Laval decanter unit in excellent condition. Fixed back drive unit. Max. bowl speed: 5600 rpm. Drum diameter: 230 mm. Max solids density: 2,1 g/cm3 This unit has been used in a pilot plant - only very ...

    Hirtshals, Denmark
  • PIERALISI ESTRATTORE CENTRIFUGO HERCULES 470/3

    PIERALISI ESTRATTORE CENTRIFUGO HERCULES 470/3

    • Manufacturer: Pieralisi

    Pieralisi sludge dewatering equipment for dewatering of municipal biological sludge in excellent condition. This decanter unit is also normally used in industrial applications. Capacity around 25.000 liters of sl...

    Hirtshals, Denmark
  • Alfa-Laval CHPX 407SGP-34

    Alfa-Laval CHPX 407SGP-34

    • Manufacturer: Alfa-Laval
    • Model: CHPX 407

    For food, beverage and chemical applications. All parts in contact with products are in stainless steel. This separator is in excellent condition and ready to be put in operation. Hydraulic capacity (pure water) ...

    Hirtshals, Denmark
123

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.