Used dimension in Denmark

28 m3 jern tank

• Manufacturer: 28 m3 jern tank

Upright / horizontal iron tank. Man hatch in the side. Bought from ELF oil's production of new engine oil - therefore no corrosion at all. Dimensions : Ø 2,500 mm L 2,500 mm H 4,500 mm

22 m3 upright steel tank

• Manufacturer: 22 m3 opretstående jerntank

Upright square steel tank. Has been used in the production of new motor oil with ELF oil - therefore no corrosion. Dimensions : W 2,000 mm D 2,250 mm H 5,000 mm

24 m3 iron tank upright

With a powerful agitator With heating coil With a weak cone bottom towards the outlet. Dimensions 2500 x 2500 x 3850 mm internal Motor 7.5 kw - 1457 rpm The agitator runs at 73 rpm

Bjørnkjær pipe exchanger

The pipes are made of DN40 and DN50. Each pipe is 6 m long. There are 32 pipes in total. Can be divided into smaller units. Dimensions Height 3250 mm Width 450 mm Length 6500 mm

Stainless 805 liter pressure tank

• Manufacturer: Rustfri 805 liters tryktank

Upright stainless pressure tank. Hatch Alfa Laval at the top. Sight glass in the hatch. Pressure relief valve. Heating/cooling jacket. Fully welded insulated outer jacket. Dimensions : Ø 1,050 mm H 2,750 mm

Tube heat exchanger

Stock number: A208 Tube heat exchanger, stainless steel, 60 pcs. Ø 20 x L 2450 mm. tubes. Estimated 9,23 m2 heating surface, outer dimensions Ø 350 x L 2700 mm.

13 m3 carbon steel tanks.

• Manufacturer: 13 m3 kølevandstanke

Upright steel tanks. A hatch in the top . Previously used for cooling water with glycol - therefore minimal rust inside. 2 pcs. in stock. Dimensions : D: 1,800 mm L: 3,000 mm H: 2,400 mm

4000 liter stainless process tanks

SOLD Agitator CIP turbines Heating jacket Insulation Fully welded outer jacket. Flat sloping bottom. Stairs in front of the tanks are included with the purchase of 2 or 4 tanks in total. Dimensions Ø 1,650 x 2,75...

Kähler And Breum GX12 1x20 2001 plate heat exchanger

Kähler and Berum GX12 1x20 2001 plate heat exchanger Test pressure 13 Bar 56mm inlet / outlet Dimensions: T.H: 106cm W: 90cm D: 32cm

Proces tanke 1.600 liter

• Manufacturer: Proces tanke 1.600 liter

Upright stainless process tanks. With the following equipment: Hatch at the top. Stirrer at the top - 534 revolutions - 1.1 kw. Heating/cooling jacket 2-piece. Cip at the top. Cone bottom. Dimensions : Ø 1,120 m...

Stainless steel tanks 25 liters

• Manufacturer: Rustfri 25 liters tanke

Upright stainless steel tanks. With brackets for wall mounting. 2 "connection at the top with DS Ø 52 dairy thread. 1/2 "connection at the bottom with a ball valve. Dimensions: Ø 3,950 mm L 8,450 mm H 4,100 mm

Galvanized Pressure tanks 120 Liter

• Manufacturer: Galvaniseret tryktanke 120 Liter

Upright pressure tanks - NEW. Approved for 21 Bar operating pressure. Test pressure 31.5 Bar Volume 120 litres 2 pcs. in stock. Dimensions : Ø 400 mm H 1,330 mm

100 m3 iron tank horizontal SOLD

100 m3 iron tank horizontally. 2 manholes at the top Located in saddles. Has contained diesel - i.e. no corrosion - like new Dimensions ø 3,200 x 12,700 mm - Height 3,500 mm

70,000 liter powder tanks in iron

70,000 liter powder tanks in iron. Almond hatch at the bottom, with railing at the top, particle filter at the top in stainless steel, vibrators on the sides, air shots at the bottom, 60 degree cone bottom. Dimen...

3 m3 upright stainless steel tank with agitator SOLD

The tank is equipped with the following; Stirrer at the top Pressureless cooling jacket Rotation stop DN70 outlet at the bottom with flange Standing on 3 legs PS. the cover on the manhole will be installed before...