Processing » Germany

Search By Category

Search By Manufacturer

Search By State

Building Filters

19483

Used Processing in Germany

  • wafer line - 29847

    wafer line - 29847

    • Manufacturer: Gemni International

    consisting of: Oven Waffle sheet cooler Cream spreading machine with 36 baking plates, size 290 x 470 mm Gas heated with propane gas. It was originally heated with natural gas. 380 / 420 V, 50 Hz Waffle sheet thi...

    Willich, Germany
  • steel belt oven

    steel belt oven

    • Manufacturer: Polin

    complete length 27.350 mm with 1 burner with 600 mm steel band in a very good condition overhauled by the owner 4 years ago ex-factory, no dismantling and packing

    Willich, Germany
  • Waffle roll oven for waffle

    Waffle roll oven for waffle rolls - 20468

    • Manufacturer: Gemni International

    capacity 150-180 sticks/min. baking drum size 2,000 mm x width 350 mm stainless steel year of construction 2017 shape of the products: stick and pillow product length: min. 50 mm - 200 mm pillow size: 23 x ...

    Willich, Germany
  • mould feeder - 27151

    mould feeder - 27151

    • Manufacturer: Selmi srl

    as an accessory unit for the SELMI Temper TOP EX capacity: approx. 100 kg/h automatic magazine system for mold feeding, vibrating, and removal for 275 x 175 mm molds approx. 360 moulds/h for solid products (bars,...

    Willich, Germany
  • wafer line for creamed wafers

    wafer line for creamed wafers - 20394

    • Manufacturer: Ed. Haas Austria GmbH

    Built in 1995, technically well maintained, Gas operated Including: Haas Turbo Mixer Model TCM 125 RS. No. 18658. 125 liters. 3x380V. 50 HZ. 16A. Mixing time 5 minutes Max. Vacuum 2.5 minutes. Haas Gas fired o...

    Willich, Germany
  • waffle cone oven for waffle

    waffle cone oven for waffle cones - 29679

    • Manufacturer: Haas Food Equipment GmbH

    complete line for PLC-controlled waffle cone production number of baking plates: 96 output: approx. 6,200 waffles/h at 60-second baking time 4 different waffle lengths: 110 mm, 117 mm, 127 mm, 130 mm with interch...

    Willich, Germany
  • Herbort - Spare parts for

    Herbort - Spare parts for cutting machines, type 122, 120 N, etc

    • Manufacturer: Herbort

    for cutting machine 122 N: Circular knife shaft complete with 91 knives - 2.8 mm cut, Flat knife - holder without knife for 2.8 mm cut, Round knife - shaft with nut, without knife, Mincer shaft pitch 28 for 1...

    Willich, Germany
  • 2007 F.A.T. KVGS

    2007 F.A.T. KVGS

    • Manufacturer: F.A.T.

    Standing frame, backwater sand cooler, pneumatic pressure vessel conveyor, overpressure filter, filling line, ladder, level measuring probes, railing

    Meinerzhagen, Germany
  • 1989 CLOCK 21.4826

    1989 CLOCK 21.4826

    • Manufacturer: UHR

    Ø approx. 1.1 m, height approx. 2.4/1.0 m, outlet DN 200, rotary valve

    Meinerzhagen, Germany
  • 2016 Reißaus & Baumberg CM

    2016 Reißaus & Baumberg CM 4-8 x 5640

    • Manufacturer: Reißaus & Baumberg

    Double-jointed design, vertical, sand dosing slide, additive dosing pumps/valves, flow monitoring, mixing capacity 4-8 t/h, throat depth 4.0 + 1.64 m, discharge height approx. 1,763 mm, connected load 14 kW, swiv...

    Meinerzhagen, Germany
  • 2007 WÖHR DWM WDS 8-25

    2007 WÖHR DWM WDS 8-25 to

    • Manufacturer: Wöhr

    Double-joint design, vertical, sand hopper / dosing slide, additive dosing pumps / valves, flow meters, mixing capacity 8-25 t/h, throat depth 5.5 + 2.0 m, discharge height approx. 2300 mm, connected load 19 kW, ...

    Meinerzhagen, Germany
  • 1978 AXMANN TURBOMIX TMV 5

    1978 AXMANN TURBOMIX TMV 5 B

    • Manufacturer: Axmann

    Single-joint design, upright, capacity approx. 5 t/h, throat depth approx. 2.5 m, premixer 1.5 kW, high-speed turbo mixer 5.5 kW, additive metering pumps, connected load 8.5 kW, control system

    Meinerzhagen, Germany
  • 1987 AXMANN TURBOMIX TME 2

    1987 AXMANN TURBOMIX TME 2

    • Manufacturer: Axmann

    Rigid single-arm design, stationary (upright), sand bunker, sand dosing slide, additive dosing pump and valves, mixing capacity 2 t/h, throat depth 1.0 m, drive power 4.0 kW, connected loads 380 V, 50 Hz, control...

    Meinerzhagen, Germany
  • 1999 F.T.L. - Foundry &

    1999 F.T.L. - Foundry & Technical Liaison Ltd. Model CM 013-5

    • Manufacturer: F.T.L. - Foundry & Technical Liaison Ltd.

    Single-joint design, stationary (upright/hanging), without column, sand dosing slide, dosing pumps and valves, mixing capacity 5 t/h, projection 1.5 m, drive power 4.0 kW, connected loads 380 V, 50 Hz, control unit

    Meinerzhagen, Germany
  • 1983 AXMANN TURBO-Mixer TM 12

    1983 AXMANN TURBO-Mixer TM 12

    • Manufacturer: Axmann

    Single-joint design, upright, capacity approx. 12 t/h, radius 2.5 m, double mixing arm (premixer) 2x 1.5 kW, turbo mixer 4 kW, additive metering pumps (1998), control system

    Meinerzhagen, Germany
  • no-image_en.png

    Atlas-Copco FX 9 Dryer

    • Manufacturer: Atlas-Copco
    • Model: FX 9

    Good condition Atlas-Copco FX 9 Dryers manufactured in 2010. Located in Germany and other countries. Click request price for more information.

    Germany
3637383940

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.