Processing » Emilia-Romagna

Building Filters

32

Used hole in Emilia-Romagna, Italy

  • Lamort Diabolo

    Lamort Diabolo

    • Manufacturer: Lamort

    Screens One DF2 (with 0,35 mm slots), suitable for last stage of coarse screening One DT2 (with 1,8 mm holes), suitable for last stage of coarse screening Pneumatic valves and control panel available

    Ravenna, Italy
  • VER4423 – Ahlstrom FF300 Dissolving

    VER4423 – Ahlstrom FF300 Dissolving Drum

      With 6 mm holes 250 kW, 380 V motor included Steelsheet forwarder Bale breaker Rubber belt forwarder Weighing machine Inlet tube Drum Discharge tank and pump Reject forwarder In very good condition

      Ravenna, Italy
    • Trusted Seller
      2009 Trituratore FORREC TB1000

      2009 Trituratore FORREC TB1000

      • Manufacturer: Forrec

      Shredder Brand: FORREC Mod. TB1000 Year 2009 No. 2 trees Cutting chamber diameter L 800 Grill holes diam.. 14 Motor Kw 15 - 4 poles B5 voltage 400V 50 Hz Overhauled in 2022: blade kit, drive belts, bearin...

      Ferrara, Italy
    • VER4566 – 20 m3 Low

      VER4566 – 20 m3 Low Density Pulper

        Stainless steel vat, with big valve for discharging rejects Rotor group complete with 10 throats pulley, Ø 1260 mm Steel plate with 8 mm hole Motor pulley, 260 mm 160 kW, 1470 rpm motor (not included), 320 rpm of...

        Ravenna, Italy
      • Trusted Seller
        IMA - Blistering Machine -

        IMA - Blistering Machine - C80R

        • Manufacturer: IMA
        • Model: C80R

        IMA BLISTERING MACHINE, MODEL C80R Year of construction: 2006 Modular stand-alone blister machine, for maximum flexibility to connect with cartoners, wallet machines and flow pack machines, and any kind of line...

        Bologna, Italy
      • VER4667 – 2900 mm Board

        VER4667 – 2900 mm Board Machine

          Installed in the ’60s Completely renewed in 1992 (replaced the side parts of the wet section, totally rebuilt the hood of the drying section, and added 6 dryer cylinders) Hood by Valmet Bono boiler 12 t/h, 10 bar...

          Ravenna, Italy
        • VER5378 – 150 Tpd Stock

          VER5378 – 150 Tpd Stock Preparation line for waste paper, with De-inking plant

            Complete 150 Tpd stock preparation line composed of: -Conveyor belt with dewiring and crusher, (year 2005), 450 tpd -Drum Pulper by Andritz (year 2015), 450 tpd -N.2 HD Cleaners by Kadant (year 2018), Type LCK-14...

            Ravenna, Italy
          • Trusted Seller
            GLATT - Coating Machine -

            GLATT - Coating Machine - GC SMART 350

            • Manufacturer: Glatt
            • Model: GC SMART 350

            GLATT DRUM COATER, MODEL GC SMART 350 Year of construction: 2014 Drum coater for use in the pharmaceutical industry. For coating and coating tablets using the film coating process. Non-EX version. MACHINE CHAR...

            Bologna, Italy
          • Trusted Seller
            GLATT - Coating Machine -

            GLATT - Coating Machine - GC 1750

            • Manufacturer: Glatt

            GLATT COATING MACHINE, MODEL GC 1750 Year of construction: 2001 Machine for the application of organic or aqueous film coat on tablets. Designed and built according to GMP standards. PRODUCTION FEATURES - Pro...

            Bologna, Italy
          • Machine PLUTO

            Machine PLUTO

            • Manufacturer: Borghi

            Vertical tufting machine with 1 filling tool and 1 drill for the production of gutter brushes (discs with folded fibers in pass-through holes). PLUTO is the Borghi industrial solution for the production of gutter...

            Castelfranco Emilia, Italy
          • Machine DRP1

            Machine DRP1

              DRP1 is a dosing and filling machine for paint brushes in synthetic or natural fiber. DRP1 has 2 stations for filling pre-drilled blocks, each of which has 1 filling head and 2 warehouses for automatic feeding of...

              Castelfranco Emilia, Italy
            • Machine KNOT A

              Machine KNOT A

                KNOT A is a fully automatic machine. Thanks to its flexibility, it is ideal for start-up production needs of twisted knot segment and/or frequent model changes. This machine is capable to run all sizes of twisted...

                Castelfranco Emilia, Italy
              • Machine KNOT F

                Machine KNOT F

                  KNOT F is a fully automatic machine for the assembly of wide range of products (cups, flat, conical, shaft) twisted knot brushes. The consolidated experience on KNOT-A combined with the technology of the assembly...

                  Castelfranco Emilia, Italy
                • Pellacini HAMMER MILLS

                  Pellacini HAMMER MILLS

                  • Manufacturer: Pellacini

                  High-capacity, high-performance grinders for carrots, tubers, and tomatoes Hammer grinders are used to grind tubers, tomatoes, and pitted fruits. They are available in several models to suit different production ...

                  Felino, Italy
                • Machine MANUAL XL

                  Machine MANUAL XL

                  • Manufacturer: Borghi

                  Vertical tufting machine with 1 filling tool for the production of brushes with pre-drilled blocks. MANUAL XL is equipped with a filling tool with 250mm stroke, able to work fiber with a maximum length of 700mm. ...

                  Castelfranco Emilia, Italy
                123

                Overview

                Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

                FAQ

                What should I consider when buying used processing equipment?

                Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

                How do I arrange shipping for processing equipment?

                Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

                What is the typical maintenance for processing equipment?

                Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.