Used processing machinery in Emilia-Romagna, Italy

VER5346 – 1850 mm complete Drying section

Complete drying section composed of 12 dyring cylinders with following features: Width 1850 mm Diameter 1500 mm Working pressure 5 bar Section complete with all the rolls, frames, supports, bearings, gearboxes, s...

1960 VER5332 – 2500 mm x 6 Drying Cylinders, Ø 1250 mm – dismantled

N°6 Dryers Diameters: Italian maker Now dismantled, well stored inside

VER5240 – 2575 mm Forming cylinder with headbox

Forming drum with its headbox Now dismantled Cylinder width: 2575 mm | Cylinder diameter: 1250 mm

VER5238 – N.7 X 2900 mm Forming Cylinders

N.7 forming cylinders For a 2900 mm wide machine Diameter: 1250 mm

1994 VER5013 – 2600 mm Pope Reel

• Manufacturer: Over Meccanica

Framework in painted carbon steel Primary and secondary arms pneumatically loaded Drum of 1000 mm diameter Several reel spools of 250 mm diameter Max. wounded roll diameter of 1400 mm Rails designed to accommodat...

VER5029 – Pulp Dryer (or Board) Machine

N° 3 Presses Inlet dry content to drying section: 50% N° 112 Drying Cylinders (11 sections) Sheet cutter at the end of machine Exit in bales up to 250 Kg, collected into 8 bales packages

VER4767 – N°9 x 1800 mm Drying Cylinders

Complete documentation available Face: 1800 mm | Diameter: 1240 mm | Speed: 800 m/min | Working pressure: 3 bar

VER4768 – N°4 x 1800 Drying Cylinders

Complete documentation available Face: 1800 mm | Diameter: 800 mm | Working pressure: 3 bar

VER4969 – 2650 mm Pope Reeler

Control panel missing Width: 2650 mm | Speed: 700 m/min | Diameter of pope drum: 1150 mm | Max paper roll diameter: N° 2 reels with 1350 mm diameter | N° 6 spools (length: 2900 mm)

VER4883 – Pope Spools

Pope Spools for Tissue Machine to hold board cores Without bearings See below drawings for all the measures

VER5030 – 3200 mm Suction Couch Roll

Total face length: 3200 mm | Perforated face: 2960 mm | Roll diameter: 810 mm | Holes diameter: 5 mm | Thickness: 33 mm | Material: Bronze

VER4441 – Wire Drive Roll

Face: 3400 mm | Gross weight (with the box): 1800 Kg | Box dimensions: 507 x 86 x 98 cm

VER4779 – N°2 x 3600 mm Forming Cylinders

N°2 Forming Cylinders complete with headbox (half in stainless steel and half in cast iron) One spare cylinder

VER5449 – 3400 mm Pope reeler

• Manufacturer: Valmet

Hydraulic Pope Reeler If needed, it is possible to cut it to a narrower width.

VER5296 – N°8 x Dryer Cylinders, face 2950 mm, diameter 1500 mm

N° 8 dryer cylinders Now dismantled, in very good condition