Used processing machines in Emilia-Romagna, Italy

VER4759 – Fourdrinier Elements for a 2700-3000 mm machine

1 Forming Board 1 Vacum Foil 11 Adjustable Angle Single foils with ceramic cover 2 Delta foils 3 Vacuum for Trivac 2 Supports for foils 3 Supports for vacuum foils 2 Boxes for Trivac 1 Vacuum foil 4 Johnson autov...

VER5218 – Parts of a 1600 mm Writing/Printing Paper Machine for specialty papers

Parts of a 300/400 m/min writing/printing Paper Machine for Specialty Papers (60 Tpd) Some stock preparation machines Headbox by Freiria, slice width 1800 mm, flow rate: 12.000 l/min, Fourdrinier with cantilever,...

VER5246 – 2800 mm Hunt & Moscrop soft calender

• Manufacturer: Hunt & Moscrop

Soft calander With several spare rolls With temperature control Electrical control panel in perfect working condition It has been in operation for 15 years

VER4876 – 2900 mm Wet Press

• Manufacturer: Toscotec

Blind Drilled High Performance Cover: SolarPress (cover thickness: 20 mm) with frames and two spare rolls Machine available from April 2018 It was installed in a 300 tpd machine running at 600 m/min, making 2600 ...

VER5297 – 3000 mm Headbox

• Manufacturer: VAS (good Italian maker)

Headbox Disinstalled in October 2023 when it was perfectly working (the mill has changed it with a new one, in order to increase the production) Also available the foil boxes (same size) that were installed toget...

VER5238 – N.7 X 2900 mm Forming Cylinders

N.7 forming cylinders For a 2900 mm wide machine Diameter: 1250 mm

VER4883 – Pope Spools

Pope Spools for Tissue Machine to hold board cores Without bearings See below drawings for all the measures

2005 Voith Masterjet II-F

• Manufacturer: Voith

Speed: 1300 mpm | Flow rate: 37.000-46.000 lpm | Gsm: 47-76

VER5447 – 2400 mm Shoe Press

• Manufacturer: Gapcon

Max paper width – 2.400 mm. at pope Rolls diam. – 1150 mm. Max pressure – 350 kN/m

VER5386 – 2700 mm Headbox

Closed pressure headbox. All made in inox. Video available on request.

VER5345 – 1780 mm Carcano Headbox

• Manufacturer: Carcano

Headbox Slice width: 1780 mm | Flow rate: 6500 l/min

1988 VER4776 – 2450 mm Voith Headbox

• Manufacturer: Voith

With header Make: Voith | Slice width: 2450 mm | Speed: 300 m/min | Grammage range: 50-200 gsm | Flow capacity: 3500-7000 l/min

2006 VER4844 – 2400 mm Comer Headbox

• Manufacturer: Comer

It needs some overhauling Pond width: 2500 mm | Paper width at pope: 2400 mm | Grammage range: 70-300 gsm | Consistency: 0,7-1,4 | Max design speed: 550 m/min | Average operating speed: 300 m/min | Flow rate min/...

VER5063 – 2710 mm Stainless Steel Headbox

Stainless steel headbox It was making 80 Tpd of fluting/liner

VER4780 – 3800 mm Wet Press

N°1 Blind Drilled Roll with one spare N°1 Flat Roll With Frames