Processing » Emilia-Romagna

Building Filters

145

Used process engineering in Emilia-Romagna, Italy

  • Trusted Seller
    TELSTAR - Lyophilizer - LYONOMIC

    TELSTAR - Lyophilizer - LYONOMIC 13 ST

    • Manufacturer: Telstar

    TELSTAR LYOPHILIZER, MODEL LYONOMIC 13 ST Year of construction: 2019 For clinical trials, pilot, and small or large scale industrial drying processes. Designed and engineered modularly to create a range of stan...

    Bologna, Italy
  • Trusted Seller
    BAUSCH+STRÖBEL - Sterilizing Oven -

    BAUSCH+STRÖBEL - Sterilizing Oven - DHT2580

    • Manufacturer: Bausch+Ströbel
    • Model: DHT2580

    BAUSCH + STRÖBEL STERILIZING TUNNEL, MODEL DHT2580 Year of construction: 1993 This tunner dries, sterilizes and depyrogenizes glass containers with a low-turbulence vertical air flow. MACHINE CHARACTERISTICS ...

    Bologna, Italy
  • Trusted Seller
    QUADRO COMIL - Mixer -

    QUADRO COMIL - Mixer - U10

    • Manufacturer: Comil
    • Model: U10

    QUADRO COMIL MIXER, MODEL U10 Year of construction: 2002 High end conical mill, ideal for mid-range capacity yields. In-line triple clamp design, to simplify installation. - the efficiency of the milling guara...

    Bologna, Italy
  • Trusted Seller
    BACHILLER - Dryer - MCV

    BACHILLER - Dryer - MCV 1000 NS

    • Manufacturer: Bachiller

    BACHILLER DRYER, MODEL MCV 1000 NS Year of construction: 1998 Stainless steel dryer. WORKING CHARACTERISTICS - Content: 2,945 liters - Working capacity: 1,000 liters - Largest cone diameter: 1,845 mm - Floor ...

    Bologna, Italy
  • CompAir L37 with delcos 3100

    CompAir L37 with delcos 3100

    • Manufacturer: CompAir
    • Model: L37

    Electrocompressor As New:Compressor Information:Hz 50 Model L37 Series Description Screw Lubricated L Series) Compressed Gas Air Free Air Yield A Rated Pressure M3 / Min) 575-44 Minimum Operating Pressure Bar G) ...

    Reggio Emilia, Italy
  • Trusted Seller
    MILL FOR AGGREGATE

    MILL FOR AGGREGATE

    • Manufacturer: ORIGINAL POLLMANN

    MILL FOR AGGREGATE Year 1993 rotor diameter: 1590 mm rotor length: 1490 mm engine power: 250-350 Kw Weight: 9.95 ton Capacity: 8.5 up to 11 tons/hour Dimensions: 2220X2338X2400mm

    Ferrara, Italy
  • Trusted Seller
    FITZMILL - Mixer - M5A

    FITZMILL - Mixer - M5A

    • Manufacturer: Fitzmill
    • Model: M5A

    Mixer FitzMill, model M5A The D6A FitzMill is ideal for use in continuous or batch production, research, and product development. Characteristics: - Quiet operation - Low dust and low heat - Wide range of pr...

    Bologna, Italy
  • Trusted Seller
    CONCEPT INOX - Vessel/Tank -

    CONCEPT INOX - Vessel/Tank - 386L

    • Manufacturer: CONCEPT INOX

    CONCEPT INOX VESSEL, MODEL 386L Year of construction: 2017 Tank for mixing ingredients for various fields of production. MACHINE CHARACTERISTICS - Material of container: 1.4307 AISI - Pressure: 3 bars - Test...

    Bologna, Italy
  • Trusted Seller
    AEROMATIC - Mixer + Fluid

    AEROMATIC - Mixer + Fluid Bed Dryer - PMA 300 + T5

    • Manufacturer: AEROMATIC

    AEROMATIC COMPLETE LINE, MODEL PMA 300 + T5 Line composed of a high speed mixer granulator and steam-heated fluidbed dryer (with a stainless steel filter housing and a stainless steel wire-mesh in the base of th...

    Bologna, Italy
  • 1998 VER4301 – 1650 mm

    1998 VER4301 – 1650 mm Extrusion Coater

    • Manufacturer: Dae Hil

    Low Density Polyethylene Coating Single extrusion Surface treatment by gas/flame; double Corona treater (at the moment installed on both paper sides), flame treatment system, available and installed but not runni...

    Ravenna, Italy
  • VER5349 – 4 tons/h NEW

    VER5349 – 4 tons/h NEW Bono steam boiler

    • Manufacturer: Bono

    This machine is NEW Fire tube steam boiler, model SG400/12/CH4/2P with the following characteristics: -380V – 50 Hz – 3 phase Scope of supply: -Boiler -Industrial burner, suitable for natural gas with modulating ...

    Ravenna, Italy
  • 1971 VER4578 – 2680 mm

    1971 VER4578 – 2680 mm Beloit Tissue Machine, 65 tpd

    • Manufacturer: Beloit

    DCS made by ABB Major rebuilds in 1984 (drying system) and 2004 (Yankee Cylinder) Scope of Supply: Valmet Yankee Cylinder installed NEW in 2004 (diameter 4580 mm) Suction press: 78 kN/m, blind press: 80 kN/m Gas ...

    Ravenna, Italy
  • Trusted Seller
    STILMAS - Water Treatment -

    STILMAS - Water Treatment - PSG 300 DTS

    • Manufacturer: STILMAS

    STILMAS WATER TREATMENT MACHINE, MODEL PSG 300 DTS Year of construction: 1993 STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heatin...

    Bologna, Italy
  • 2024 CMC CPM7,5-10/270 X 10BAR

    2024 CMC CPM7,5-10/270 X 10BAR SU SERBATOIO 270 LT

    • Manufacturer: CMC

    📢New Entry from BM Trading! The new screw compressor on 270 litre tankwith timed condensate drainIt is the ideal solution for those seeking continuity, reliability and zero interruptions. 👉 With this system you...

    Parma, Italy
  • 1973 VER4501 – Boiler and

    1973 VER4501 – Boiler and Generator

    • Manufacturer: Macchi

    Main boiler Thermal output with 20 t/h production: 92,5% Output test trial according to UNI 7708 rules Fuels: After being stopped in 2008 it has been put into security and a treatment of anti-corrosion has been c...

    Ravenna, Italy
56789

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.