Processing » Emilia-Romagna

Building Filters

50

Used nc in Emilia-Romagna, Italy

  • Trusted Seller
    MILL FOR AGGREGATE

    MILL FOR AGGREGATE

    • Manufacturer: ORIGINAL POLLMANN

    MILL FOR AGGREGATE Year 1993 rotor diameter: 1590 mm rotor length: 1490 mm engine power: 250-350 Kw Weight: 9.95 ton Capacity: 8.5 up to 11 tons/hour Dimensions: 2220X2338X2400mm

    Ferrara, Italy
  • Trusted Seller
    LAMORT MODEL CH7 HORIZONTAL PRESSURE

    LAMORT MODEL CH7 HORIZONTAL PRESSURE SCREEN NO MOTOR

    • Manufacturer: LAMORT

    Used Lamort Model CH7 horizontal pressure screen , S/S , slotted basked 0.25 mm slots , No motor

    Ravenna, Italy
  • Trusted Seller
    ESCHER-WYSS EIK DEFLAKER

    ESCHER-WYSS EIK DEFLAKER

    • Manufacturer: ESCHER WYSS

    STOCK NUMBER 109660 USED ESCHER-WYSS E1K DEFLAKER C/I body, S/S discs 40-60 TPD

    Ravenna, Italy
  • I.mec gruppo scarico mulino gsm

    I.mec gruppo scarico mulino gsm

    • Manufacturer: I.mec

    The continuous mill discharge unit model GSM, allows the pumping of ceramic slips from the continuous mill (MMC). The rubber-coated vertical centrifugal pump in the machine can also operate without the presence o...

    Reggio Emilia, Italy
  • Trusted Seller
    KROFTA SPC22 FLOATATOR

    KROFTA SPC22 FLOATATOR

    • Manufacturer: Krofta

    DIAMETER 6700 mm FLOW RATE 265 M3/h ADJUSTABLE HEIGHT BAFFLE ATTACHMENT TURBULENCE REDUCTION BAFFLES REVOLVING SPIRAL SCOOP ROTATING CARRIAGE GEAR MOTOR DRIVE COMPLETE(1,1 Kw WITH GEAR REDUCTION) FLOW CONTROL CHA...

    Ravenna, Italy
  • Trusted Seller
    104" (2.65M) TISSUE MACHINE 20

    104" (2.65M) TISSUE MACHINE 20 - 30 TPD (2) CONFIGURATIONS

    • Manufacturer: TISSUE

    109244 One (1) used 104" (2.65M) wide Tissue machine Solá Industrias Mecánicas Year: 2000 Capacity: 20-30 TPD (from 15 to 32 GSM) Width: 2650 mm Speed: 500 m/min IMPORTANT: this tissue machine can have two config...

    Ravenna, Italy
  • VER4532 – Ground Wood Pulp

    VER4532 – Ground Wood Pulp Plant

      The plant was used to produce SGW (stone ground wood) pulp for graphic paper with a capacity of 22.000 tons (long fiber) or 30.000 tons (short fiber) per year (some equipment is ready for 50% more capacity). The ...

      Ravenna, Italy
    • VER4769 – Complete plant for

      VER4769 – Complete plant for 1200 Tpd of ECF (elemental chlorine free) pulp

      • Manufacturer: Andritz

      See below list of the components that can be sold separately:

      Ravenna, Italy
    • VER2532 – Groundwood Plant

      VER2532 – Groundwood Plant

        Total 10 grinders: 4 chain grinders Voith 6 screw grinders Fullner With 1000 Kw motors, 6000 V, 50 Hz, with rheostat for start-up Debarking plant with KMW 4 m Ø drum, conveyors and saw for trimming and cutting 2 ...

        Ravenna, Italy
      • I.mec scarico mulino con pompe

        I.mec scarico mulino con pompe pneumatiche

        • Manufacturer: I.mec

        Model | Construction Material | Electrical Power | RPM | Superfìce vagllante per plano. GRC BI.S.V. 450 | IncK AISI 304 L and Alloy / Stainless Steel and Alio/ / Inoxidable y Aleación | 0.19 Kw. | 3000 | Sq. mt. ...

        Reggio Emilia, Italy
      • I.mec LINEA DI SMALTERIA CON

        I.mec LINEA DI SMALTERIA CON POMPE ELETTRICHE

        • Manufacturer: I.mec

        Model | Construction Material | Electrical Power | RPM | Superfìce vagllante per plano GRS 450 | Incoe AISI 304 L/ Stainless Steel / Inoxidable | 0.19 Kw. | 3000 | Sq. mt. / M2 0.105 GRS 600 | Incoe AISI 304 L/ S...

        Reggio Emilia, Italy
      • I.mec gruppi carrellati per scarico

        I.mec gruppi carrellati per scarico mulino con pompe elettriche grc+var

        • Manufacturer: I.mec

        The GRC+VAR Wheeled Unit is particularly suitable for use in ceramic industries, in grinding departments at the discharge of glaze mills or tanks, in raw material preparation departments at the discharge of disco...

        Reggio Emilia, Italy
      • Trusted Seller
        FREWITT - Granulator - MGH-6-003

        FREWITT - Granulator - MGH-6-003

        • Manufacturer: Frewitt

        FREWITT MILL, MODEL MGH-6-003 Atex hammer mill in stainless steel. MACHINE CHARACTERISTICS - Rotor milling tool: 260 mm - Motor: Felten & Guilleaume (4 KW) - Grinding chamber depth: 19 cm - Rotary valve: Frewi...

        Bologna, Italy
      • Trusted Seller
        FRYMA - Mixer - VME-12

        FRYMA - Mixer - VME-12

        • Manufacturer: Fryma
        • Model: VME-12

        FRYMA MIXER, MODEL VME-12 Year of construction: 1986 Vacuum mixer with temperature sensor and tilting vessel. For use in the pharmaceutical industry. MACHINE CHARACTERISTICS Maximum overpressure - Inside: 98...

        Bologna, Italy
      • 2016 ST (very good Italian

        2016 ST (very good Italian constructor) SPC20

        • Manufacturer: Italian Constructors

        Screen head of machine The installed basket has worked for less than one year. There are also n°2 spare baskets made by Andrtiz: -one BRAND NEW with 0.35 mm slots -one used only for a couple of weeks, also with 0...

        Ravenna, Italy
      1234

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.