Used test in England, United Kingdom

Cap Elevator

• Manufacturer: GlobePack Equipment

Cap elevator Features: All Stainless Steel construction Chute feed height 1570mm 200L hopper with top and side opening doors Chute and hopper sensors 180V, 2.6A, 370W, 2700RPM Machine size: 950mm x 500mm x...

Atlas Copco GA75+ 519cfm 7.5bar fixed speed screw compressor

• Manufacturer: Atlas-Copco
• Model: GA 75

Atlas Copco GA75+ Premium model Serial Number API604434Very High output on the plus range with its oversize C146 airend519cfm at 7.5bar2007 modelVery Sensible hours with only 33528 HoursSupplied fully serviced ru...

1350 L S/S Jktd Pressure Vessel

Stainless Steel Vessel 1220 Dia. 910 mm On Side, Coned Bottom To 150 mm Outlet. 1070 mm Deep Dished Top With 400 mm Manway 100, 63 & 3 X 38 mm Top Connections, 2 X 100 mm Sight Glass,Tested To 30 Psi, Mild Steel ...

235L Skerman S/S JKTD Pan

Stainless Steel pan with mild steel jacket, 750mm dia x 750mm deep with bottom centre outlet approx 50mm dia mounted on three legs to give 500mm clearance. Jacket Working Pressure 40 PSI, Test Pressure 60 PSI. ov...

3.9 Sq.M. Corronel S/Tube Heat Exchanger

Corronel 2 Pass Condencer With 46 25 mm Dia Tubes 1070 mm Long,Shell Dia 300 mm With 50 & 2 Off 25mm Dia Connections. Tube Connections 25 mm Dia. Test Pressure Shell 100 Psi, Tubes 30 Psi,Mild Steel End Caps,Good...

Compair L30-7.5A 30kW 203cfm Used Screw Compressor

• Manufacturer: CompAir
• Model: L30-7.5

Compair L30-7.5A Screw Compressor Serial number CD100066840022011 30kW direct drive screw compressor with Decloss XL Touch Screen Controller7.5bar and 203cfm max outputVery clean tidy sensible hours machineSold f...

Compair L30-7.5A 30kW 203cfm Used Screw Compressor

• Manufacturer: CompAir
• Model: L30-7.5

Compair L30-7.5A Screw Compressor Serial number CD100066840012011 30kW direct drive screw compressor with Delcoss XL touch screen controller7.5bar and 203cfm max outputVery clean tidy sensible hours machineSold f...

Kendall Genius 2 Checker/Calibrator

• Manufacturer: Kendall

This listing is for a Kendall Genius 2 Checker/Calibrator The Genius™ Checker & Calibrator checks the accuracy of the Genius™ tympanic thermometer and automatically recalibrates the thermometer, if necessary. In...

850 L S/S Vessel With Coil Jacket

1165 mm Dia X 800 mm Deep Dished Bottom. With 2 X 50 mm Dia Bottom Side Outlets With 3 Turns Of 1/2 Coil With 50 mm Connections. With Lid Standing On Three Legs. Overall Height 1232 mm. Design Pressure 150 Psi. H...

130 L S/S Jktd Reactor Pressure

Stainless Steel Vessel 500 mm Dia. 660 mm Deep With Dished Bottom To 50 mm Outlet. Flat Bolt On Lid With 3 X 19 mm, 12 & 50 mm Connections, 100 mm. Vessel D.P. 30 Psi T.P. 60 Psi Jacket D.P. 200 Psi Test Pressure...

Heisswolf GmbH 2m Conveyor

• Manufacturer: Heisswolf GmbH

Heisswolf GmbH 2m Plastic Slat Conveyor Variable speed gearbox on fixed conveyor Swing conveyor is fixed speed 100mm wide plastic slats 2 x start/stops fitted (one on each section) Adjustable guide rails 41...

Monk 3.6m Conveyor

• Manufacturer: Monk

Monk Conveyors Ltd model M1950-CDV 3.6m conveyor Features Variable speed Continuous material belt 345mm wide Emergency stop Mobile on wheels with brakes Electrical supply: 240V single phase CE marked Mach...

Compair Cyclone 218 LOW HOURS 18.5 Kw 116 CFM 7.5 Bar

• Manufacturer: CompAir

Cyclone 218Here is a very good condition fully serviced cleaned run and tested 18.5 kW 25hp base mounted rotary screw compressorWith only 15.9K Hours this machine hasn’t even done 2 years worth of work!116cfm flo...

Monk 3.6m Conveyor

• Manufacturer: Monk

Monk Conveyors Ltd model M1950-CDV 3.6m conveyor Features Variable speed Continuous material belt 345mm wide Emergency stop Mobile on wheels with brakes Electrical supply: 240V single phase CE marked Mach...