Processing » Flanders

Building Filters

34

Used loading in Flanders, Belgium

  • Trusted Seller
    Atlas-Copco GA18 + FD506

    Atlas-Copco GA18 + FD506

    • Manufacturer: Atlas-Copco
    • Model: GA 18+

    Motor: 18.5 kW Start Amps: 84.9 Amps / Full load: 36.4 Amps

    Deinze, Belgium
  • SVT longitudinal sealing unit

    SVT longitudinal sealing unit

      650 mm wide longitudinal sealer - Maximum film width 650 mm - 1 set of sealer with heating cartridge and spring-loaded to have the perfect pressure during sealing (NOT HOT AIR) - Running Teflon strip between seal...

      Aalst, Belgium
    • 2000 SVT longitudinal sealing unit

      2000 SVT longitudinal sealing unit

        1200mm wide longitudinal sealer - Maximum working width 1200 mm (1300mm film passing width) - 2 set of sealers with heating cartridge and spring-loaded to have the perfect pressure during sealing (NOT HOT AIR) - ...

        Aalst, Belgium
      • Trusted Seller
        Auction
        2015 Tecma PAD1200

        2015 Tecma PAD1200

        • Manufacturer: Tecma

        Tecma PAD1200 Grid Inserter (2015) Twin loading stations Please note the items in this lot 30679-5 are simultaneously offered in the combination lot 30679-1 as a complete line. The separate parts of the complete ...

        Merchtem, Belgium
        Visit Auction Website
      • Trusted Seller
        no-image_en.png

        1988 ATLAS COPCO ZT3A

        • Manufacturer: Atlas-Copco
        • Model: ZT 3A

        Capacity [m³/min]: 17.8 | Pressure [bar]: 7 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Remarks: loaded hours 13472 | Stars: Good | Power [kw]: 132 | Hours (on hour meter): 15276 | Ce mark: No; pre 1994 |...

        Waregem, Belgium
      • 1988 Lemo folding triangle

        1988 Lemo folding triangle

        • Manufacturer: Lemo

        Unwind + folding trianlge 1350mm Air shaft with magnetic brake system Hydraulic lifting Edge guide system (Fife) 4 roll dancer Tension control system with load cell Adjustable folding triangle on top Inside lip f...

        Aalst, Belgium
      • Trusted Seller
        no-image_en.png

        1990 INGERSOLL RAND ML200

        • Manufacturer: Ingersoll Rand
        • Model: ML200

        Capacity [m³/min]: 34 | Pressure [bar]: 7.5 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Remarks: hours after complete revision, total load hours: 10225 | Stars: Good | Hours (on hour meter): 12044 | Outsi...

        Waregem, Belgium
      • Trusted Seller
        no-image_en.png

        1986 ATLAS COPCO GA1410

        • Manufacturer: Atlas-Copco
        • Model: GA 1410

        Capacity [m³/min]: 18.8 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Remarks: Load Time : 24592h | Stars: Good | Weight [kg]: 2360 | Power [kw]: 142 | Hours (on hour meter): 47314 | Ou...

        Waregem, Belgium
      • 1987 Kiefel Rotex 30 S

        1987 Kiefel Rotex 30 S

        • Manufacturer: Kiefel

        Blown film extruder For the production of LDPE – MDPE & LLDPE film The extruder and rotating film blowing head are mounted in the top of the tower The film is blown from the top of the tower to the winder on the ...

        Aalst, Belgium
      • 2013 Limax Alpha 1100

        2013 Limax Alpha 1100

        • Manufacturer: Limax

        Bottom seal machine with flying knife Second hand Limax Alpha 1100 bottom seal machine with flying knife cutting system (BS-367) - General information - Unwind Section Non-driven unwind with pneumatic lift and me...

        Aalst, Belgium
      • no-image_en.png

        1990 Elba SA-90 11HSP

        • Manufacturer: Elba
        • Model: SA

        Mixed seal machine for carrier bags PLC controlled Operator interface terminal Servo motor driven bag feeding Input nip rollers Rigid sealing bar with flying knife Driven un-winder 1500 mm wide with motor on top ...

        Aalst, Belgium
      • 2006 Hein Shoplux LR 64

        2006 Hein Shoplux LR 64

        • Manufacturer: Hein

        Hein Shoplux LR64, convection rotary oven Hein rotary oven from 2006 with hood Hein Shoplux LR64 with hood Year of construction 2006

        $22,922 USD

        Get financing

        Est. $431/mo

        Geel, Belgium
      • 2011 Unox Bakertop XBC605

        2011 Unox Bakertop XBC605

        • Manufacturer: Unox

        The 2011 Unox Bakertop XBC605 is a bake-off hot air oven with space for 6 60 x 40 cm baking trays. Programming for 70 programs, 4 programmable baking steps. The oven has been technically checked and is in working...

        $923 USD
        Geel, Belgium
      • 2013 Unox Bakertop XBC405E

        2013 Unox Bakertop XBC405E

        • Manufacturer: Unox

        The 2013 Unox Bakertop XBC405E is a bake-off hot air oven with space for 4 60 x 40 cm baking trays. Programming for 70 programs, 4 programmable baking steps. The oven has been technically checked and is in workin...

        $807 USD
        Geel, Belgium
      • 2015 Hein CL 4040 80×120

        2015 Hein CL 4040 80×120 black stainless steel

        • Manufacturer: Hein

        A used Hein CL 4040 from 2015, finished in black stainless steel with an authentic look – with 4 separate baking levels of 80 x 120 cm and a proofer in the base. Hein CL 4040 – black stainless steel authentic loo...

        Geel, Belgium
      123

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.