Processing » Flanders

Search By Category

Search By Manufacturer

Building Filters

689

Used processing equipment in Flanders, Belgium

  • Trusted Seller
    no-image_en.png

    1999 INGERSOLL RAND MH75

    • Manufacturer: Ingersoll Rand
    • Model: MH75

    Capacity [m³/min]: 11.3 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Stars: Good | Power [kw]: 75 | Hours (on hour meter): 21501 | Location machine: Belgium - EU

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    1994 INGERSOLL RAND MH45

    • Manufacturer: Ingersoll Rand
    • Model: MH45

    Capacity [m³/min]: 6.5 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Stars: Good | Weight [kg]: 953 | Power [kw]: 53.5 | Hours (on hour meter): 46474 | Outside condition: Good | Length [m]: 1.90 | Width [...

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    2003 ATLAS COPCO GA50VSD

    • Manufacturer: Atlas-Copco
    • Model: GA 50 VSD
    • Noise level: 66 dB

    Pressure [bar]: 8 | Power [kw]: 50-67 | Hours (on hour meter): 22239 | Location machine: Belgium - EU

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    2008 COMPAIR C125

    • Manufacturer: CompAir
    • Model: C125

    Capacity [m³/min]: 12.5 | Pressure [bar]: 7 | Engine: Cummins | Weight [kg]: 2200 | Power [kw]: 97 | Cylinder: 4 | Location machine: Belgium - EU

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    2004 INGERSOLL RAND T302445-DTF

    • Manufacturer: Ingersoll Rand

    Pressure [bar]: 14 | Tension [v/ph/hz]: 400/3/50 | Engine: electric 132M436 | Weight [kg]: 360 | Power [kw]: 7.5 | Ce mark: ok | Length [m]: 2 | Width [m]: 0.8 | Height [m]: 1.3 | Location machine: Belgium - EU

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    WINAIR SC2200HDE-7BAR

    • Manufacturer: Winair

    Pressure [bar]: 7 | Engine: GX 650 | Weight [kg]: 145 | Power [kw]: 16.5 | Hours (on hour meter): 690 | Ce mark: ok | Length [m]: 0.89 | Width [m]: 0.635 | Height [m]: 0.67 | Cylinder: 1 | Location machine: Belg...

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    2001 INGERSOLL RAND MH75

    • Manufacturer: Ingersoll Rand
    • Model: MH75

    Capacity [m³/min]: 11.00 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Stars: Fair | Weight [kg]: 1425 | Power [kw]: 75 | Hours (on hour meter): 8500 | Outside condition: FAIR | Ce mark...

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    1998 INGERSOLL RAND ML55

    • Manufacturer: Ingersoll Rand
    • Model: ML55

    Capacity [m³/min]: 10.2 | Pressure [bar]: 7.5 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Stars: Fair | Weight [kg]: 1510 | Power [kw]: 55 | Hours (on hour meter): 14750 | Location machine: Belgium - EU

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    2002 INGERSOLL RAND MH55

    • Manufacturer: Ingersoll Rand
    • Model: MH55

    Capacity [m³/min]: 8.2 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Remarks: mounted on skid | Stars: Good | Weight [kg]: 1510 | Power [kw]: 55 | Hours (on hour meter): 8825 | Outside ...

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    1985 INGERSOLL RAND ML45

    • Manufacturer: Ingersoll Rand
    • Model: ML45

    Capacity [m³/min]: 7.4 | Pressure [bar]: 7.5 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Stars: Good | Weight [kg]: 953 | Power [kw]: 52 | Hours (on hour meter): 47487 | Outside condition: Good | Length [...

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    2002 INGERSOLL RAND UP5-18-10

    • Manufacturer: Ingersoll Rand
    • Model: UP5-18-10

    Capacity [m³/min]: 2.61 | Pressure [bar]: 10 | Power [kw]: 18.5 | Hours (on hour meter): 52000 | Location machine: Belgium - EU

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    RENOPOWER BD7.5-270-12.5-T

    • Manufacturer: RENOPOWER

    Capacity [m³/min]: 0.712 | Pressure [bar]: 12 - 5 | Tension [v/ph/hz]: 380/ /50 | Engine: Electrical / 3 cyl 1180 rpm | Remarks: Tank Cap. 270 liter | Weight [kg]: 213 | Power [kw]: 5.5 (hp 7.5) | Outside condit...

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    RENOPOWER BD7.5-270-12.5-T

    • Manufacturer: RENOPOWER

    Capacity [m³/min]: 0.712 | Pressure [bar]: 12 - 5 | Tension [v/ph/hz]: 380/ /50 | Engine: Electrical / 3 cyl 1180 rpm | Remarks: Tank Cap. 270 liter | Weight [kg]: 213 | Power [kw]: 5.5 (hp 7.5) | Outside condit...

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    2005 DOYEN LK1

    • Manufacturer: DOYEN

    Engine: Electric | Remarks: YOM unverified, ask for inspection | Stars: Fair | Outside condition: FAIR | Ce mark: verify | Location machine: Belgium - EU

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    1977 INGERSOLL RAND EURO30 253

    • Manufacturer: Ingersoll Rand

    Capacity [m³/min]: 0.73 | Pressure [bar]: 15 | Tension [v/ph/hz]: 400/690/3/50 | Engine: VEM | Stars: Fair | Power [kw]: 5.5 | Location machine: Belgium - EU

    Waregem, Belgium
3940414243

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.