Processing » Flanders

Building Filters

14

Used infeed in Flanders, Belgium

  • Trusted Seller
    Twin shaft paddle mixer 300

    Twin shaft paddle mixer 300 L "Barsso", Type Barmix 300

      new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 3,3 / 4,4 kw inspection gantry safety lid CE-approved overall dimensions (l x w x h) : 1.750 x 950 x 1.650 mm (open lid: H: 2.100 mm) dimensi...

      Zwevegem, Belgium
    • Trusted Seller
      Declining conveyor belt “GEA-CFS” Type

      Declining conveyor belt “GEA-CFS” Type DCC3200/650

      • Manufacturer: CFS/Koppens

      all stainless steel total dimensions: (l x w x h) : ± 2.900 x 1.250 x 2.500 mm mobile height of the flights 30 mm outfeed height ± 1.000 mm

      Zwevegem, Belgium
    • Trusted Seller
      Z-Elevating conveyor belt “GEA-CFS”

      Z-Elevating conveyor belt “GEA-CFS”

      • Manufacturer: CFS/Koppens

      plastic belt with flights height of the flights 10 cm distance between the flights 300 mm belt width 620 mm adjustable outfeed height ± 2.400 mm + 100 mm adjustable speed mobile

      Zwevegem, Belgium
    • Trusted Seller
      Elevating conveyor belt “GEA”

      Elevating conveyor belt “GEA”

      • Manufacturer: GEA

      plastic belt with flights height of the flights 15 mm distance between the flights 100 mm belt width 400 mm outfeed height ± 1.250 mm mobile

      Zwevegem, Belgium
    • Trusted Seller
      Elevating conveyor belt “Laska”, Type

      Elevating conveyor belt “Laska”, Type FB 6040

      • Manufacturer: Laska

      plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.300 mm adjustable speed mobile

      Zwevegem, Belgium
    • Trusted Seller
      "Barsso" twin shaft paddle mixer

      "Barsso" twin shaft paddle mixer 300 L, Type Barmix 300 PEF (made by N & N)

      • Manufacturer: N&N Nadratowski

      all stainless steel PLC control pneumatic lid and discharge valve variable speed 2 mixing directions 4 kW inspection gantry safety lid CE-approved Easy clean

      Zwevegem, Belgium
    • Auction
      Van voorden Sigma 3 Stone

      Van voorden Sigma 3 Stone Cutting Machine

      • Manufacturer: Van Voorden

      Hour reading: 11830, complete with 2x infeed roller conveyor including with dimensions:340x200cm

      Aalst, Belgium
      Visit Auction Website
    • Trusted Seller
      1995 HOMAG FL 20/05/25 -

      1995 HOMAG FL 20/05/25 - TD... Complete plants

      • Manufacturer: Homag

      machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubricati...

      Kortrijk, Belgium
    • 1997 Arvor 1497 KSM

      1997 Arvor 1497 KSM

      • Manufacturer: Arvor

      Bottom seal machine with automatic folding table Bottom seal with flying knife Servo bag feeding (renewed 2022) Touchscreen for operation mode and settings data (Renewed 2022) Automatic folding table for 1 or 2 t...

      Aalst, Belgium
    • 1987 Arvor 1182 GGL

      1987 Arvor 1182 GGL

      • Manufacturer: Arvor
      • Model: 1182 GGL

      Bottom weld bag making machine Bottom seal with flying knife Sealing wires on top and bottom seal bar Blocked bags system Unwind with 2 positions 4 roll dancer with infeed motor and rubber infeed roll with nip ro...

      Aalst, Belgium
    • GN 46P

      GN 46P

      • Manufacturer: GN

      3 side seal pouch sealing machine 3 x220 V 50/60 Hz 2 position unwind with Boschert safety chucks 2 Tidland air shafts 76mm with powder brake on each shaft Edge guide with air sensor on each unwinding unit Ultras...

      Aalst, Belgium
    • 1994 Stiegler US-S 800

      1994 Stiegler US-S 800

      • Manufacturer: Stiegler

      Side sealing machine 380 V, 50 Hz Servo motor for bag feeding (original servo system made by Stiegler) Sealing bar for PP and thin LDPE equiped with thermocouple Sick photocell for printed film 2 x Stiegler perfo...

      Aalst, Belgium
    • Trusted Seller
      Colussi Ermes Crate washers

      Colussi Ermes Crate washers

        Colussi Ermes crate washing and drying line, type: L013/01, type: 9973, serial number: 1856, year of construction: 2010, maximum crate size: 600 mm x 400 mm x 330 mm, consisting of: infeed belt, plastic mesh belt...

        Anzegem, Belgium
      • Trusted Seller
        no-image_en.png

        Tempura Dipper “Alco”, Type ADT 400

          belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with infeed belt mobile

          Zwevegem, Belgium

        Overview

        Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

        FAQ

        What should I consider when buying used processing equipment?

        Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

        How do I arrange shipping for processing equipment?

        Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

        What is the typical maintenance for processing equipment?

        Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.