Processing » Germany

Search By Category

Search By Manufacturer

Search By State

Building Filters

561

Used metal processing in Germany

  • El. heated pit furnace

    El. heated pit furnace

    • Manufacturer: Borel

    El. heated pit furnace, make Borel with air circulator type: 11.85 temperature: max. 550°C connected load: 5 kW clear ø: 300 mm clear height: approx. 570 mm without control cabinet

    $119 USD
    Dortmund, Germany
  • Push-through furnace system

    Push-through furnace system

    • Manufacturer: LOI

    Push-through furnace system, make LOI Batch dimensions: max. 1200x780x400 (L x W x H) Total output: 565 kW Burners: LBE Reku burners & radiant heating tubes Gases used: Endogas with air and natural gas as enr...

    Dortmund, Germany
  • Trusted Seller
    Spraying machine Venjakob VEN SPRAY

    Spraying machine Venjakob VEN SPRAY Comfort, 2017-M

    • Manufacturer: Venjakob

    Pos.1 VEN CLEAN Smart Entstaubung Druckluftentstaubung zur Reinigung der zu lackierenden Werstücke von Staub auf profilierten Werkstückoberflächen. Es sind fünf rotierende Blassterne installiert. Diese lösen den...

    Blomberg, Germany
  • Trusted Seller
    Weber HSP31-ZEH180 vibratory spiral conveyor

    Weber HSP31-ZEH180 vibratory spiral conveyor screw conveyor spiral conveyor feeding technology

    • Manufacturer: Weber

    Process: Fasteners are poured into the bowl as bulk material and propelled upward by mechanical vibration of the bowl (micro-throw principle). Sorting and separation of the conveyed material at the bowl outlet is...

    $411 USD
    Borken, Germany
  • Trusted Seller
    Ruhstrat KDR 3 chamber furnace

    Ruhstrat KDR 3 chamber furnace hardening furnace firing furnace tempering furnace 1200° C furnace 8.5 kW

    • Manufacturer: Ruhstrat

    Ruhstrat KDR 3 Hardening oven 1200°C 8.5kW 380 V Age rating: No age restrictions | Country of manufacture: Germany | Content: 1 piece | Dimensions with frame: H= 140cm, W= 66cm, D=95cm | Dimensions without frame:...

    $1,096 USD
    Borken, Germany
  • Trusted Seller
    POSTEN conveyor belt cross conveyor

    POSTEN conveyor belt cross conveyor belt conveyor belt rubber feed belt conveyor belt roller

    • Manufacturer: Musterfirma

    Storage wear possible. You are only purchasing the conveyor belts! -> No wire mesh box or anything else. - Various dimensions (L/W)

    $462 USD
    Borken, Germany
  • 2004 INDUCTOTHERM VIP Dual-Trak 750

    2004 INDUCTOTHERM VIP Dual-Trak 750 CR

    • Manufacturer: Inductotherm

    Capacity 2x 750 kg Al, rated temperature max. 780 °C, three-phase oil transformer, 750 kW, 865 kVA converter, pump station, water recooling system, hydraulic units, control panels

    Meinerzhagen, Germany
  • 2002 NABERTHERM Liquitherm T 40/12

    2002 NABERTHERM Liquitherm T 40/12

    • Manufacturer: Nabertherm

    electrically heated ladle furnace, capacity approx. 90 kg Al / 300 kg Cu, furnace temperature max. 1200 °C, melting rate approx. 60 kg Al/h, crucible A 300, power consumption 26 kW, connection values 400 V, 50 Hz...

    Meinerzhagen, Germany
  • 2015 PROMEOS BA 31010.0413.0000

    2015 PROMEOS BA 31010.0413.0000

    • Manufacturer: PROMEOS

    (Propane)gas-heated bale-out furnace, crucible BPS 750 / trivet Ø 360 x 300 mm, capacity approx. 750 kg Al, gas burner, rated heat output 35-100 kW, gas pressure 30-65 mbar, fuel 26 +/- 0.5 kWh/m³, operating temp...

    Meinerzhagen, Germany
  • 1986 FULMINA SOU 100 vö

    1986 FULMINA SOU 100 vö

    • Manufacturer: FULMINA

    Oil-heated, fixed bale-out furnace, capacity approx. 350 kg Al, oil burner (1993), type 3.2-4/0, melting capacity approx. 220 kg Al/h, crucible BUC 350, temperature max. 900°C, control system

    Meinerzhagen, Germany
  • 2003 HINDENLANG SLE - 500/3

    2003 HINDENLANG SLE - 500/3

    • Manufacturer: Hindenlang

    electrically heated bale-out furnace, capacity approx. 500 kg Al, furnace temperature max. 900 °C, melting time approx. 220 min./batch, crucible BU 500, power requirement 66 kW, connected loads 400 V, 50 Hz, temp...

    Meinerzhagen, Germany
  • Trusted Seller
    2008 Manousek AVOR 1108/10

    2008 Manousek AVOR 1108/10

    • Manufacturer: Manousek

    Casting machine for balancing weights - steel rims Zinc die-cast Serial number: 02887 PLC type: Siemens S7 including spiral conveyor RNA Type SR8-B-250-2L Operating voltage: 3x400V, 50Hz, Control voltage: 24V, PL...

    Altenstadt, Germany
  • no-image_en.png

    1985 CHEMETALL ROTO FINISH ST 440

    • Manufacturer: Chemetall

    Round trough vibrator Ø 1,600 mm, bulk material process, gross volume approx. 440 l, batch weight max. 925 kg, drive power 5.6 kW, connected loads 380 V, rubber lining, water/compound connection, grinding/polishi...

    Meinerzhagen, Germany
  • Trusted Seller
    Munsch GM-E3 extruder welder extrusion

    Munsch GM-E3 extruder welder extrusion welder plastic LP 5355 €

    • Manufacturer: Munsch

    _FP Age rating: No age restrictions | Content: 1 piece | Mass: 45000 g | Item condition: Used, in very good condition. | Wt.: approx. 45 kg

    $1,962 USD
    Borken, Germany
  • Trusted Seller
    Heller LRK 0 water chillers

    Heller LRK 0 water chillers chiller high performance chiller

    • Manufacturer: Heller

    Age rating: No age restrictions | Country of manufacture: Germany | Content: 1 piece

    $448 USD
    Borken, Germany
1314151617

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.