Used teste in Germany

PAGUS belt conveyor

• Manufacturer: Pagus

belt conveyor, belt conveyor, conveyor belt, belt conveyor PAGUS 1920 x 100 mm Gearbox: LENZE SSN31-1FVAL Motor: LENZE SSN31-1UVAL-056C21 0,09 kW 2700 rpm 230 / 400 V 3AC 50 Hz IP54 used, tested !

Agitator tank 50 cbm, insulated

• Manufacturer: Sielmann

Design: Upright cylinder with a flat bottom, sloped toward the outlet, with a conical top bottom. Trapezoidal agitator centered at the top, approx. 5 kW, approx. 30 rpm. With an external half-pipe coil, 18 m² on ...

Kaeser mobile compressor system CSDX 162

• Manufacturer: Kaeser

Mobile compressor system in 40 foot container 2x compressors: Kaeser CSDX 162 (CSDX162) Tanks: B&B Anlagen Umwelttechnik GmbH DH1130 Filters: Kaeser FE-354E (FE354E) Oil-water separator: Kaeser Aquamat CF75 more ...

PAGUS electric air heater

• Manufacturer: Pagus

Electric air heaters, electric air heaters PAGUS 2x 2000 W 2x outlet spigots: Diameter ( inside / outside ): Ø 46 / 50 mm, length: 40 mm 2x connection for temperature sensor: diameter: Ø 8 mm Housing material: St...

ELEKTROR radial fan

• Manufacturer: Elektror

Radial fan, centrifugal blower, centrifugal fan ELEKTROR, KARL W. MÃLLER 7.0 m³/min 1.765 kPa (180 mmWs) 2800 rpm 220 /380 V 3 AC 50 Hz Bolt circle diameter: 112 mm, 4x bore: Ã 11.2 mm used, tested!

ECOCOLD cooling unit

Cooling unit, heat exchanger, cooler, chiller ECOCOLD AWP 10 Pump: KSB Multi Eco 35 D 0.8 kW 220 - 240 / 380 - 415 V 3AC 50 Hz Fan: ZIEHL-ABBEGG 104838 0.015 kW 870 rpm 230 V 1AC 50 Hz used, tested !

VENTIFILT centrifugal fan

Centrifugal fan, centrifugal blower, centrifugal fan VALVE VHF-315 Engine : HZF 80a-2D/2240-1 0.75kW 2840 rpm 220/380V 3AC 50Hz IP44 Intake opening: Ø 200 /160 mm, flange diameter: Ø 260 mm used, tested !

PAGUS conveyor belt

• Manufacturer: Pagus

Conveyor belt, conveyor belt PAGUS 740 x 190 mm Gearbox: GFC GETRIEBEFABRIK COSWIG Type: 10 TU 2 100 x 800 motor: REMI type: EL-21 0,37 kW 1340 rpm 220 / 380 V 3AC 50 Hz IP44 chain drive ratio: 1 : 1 used, tested !

GEBHARDT radial fan

• Manufacturer: Gebhardt

Centrifugal fan, centrifugal blower, centrifugal fan, GT fan, with inverter and exhaust air flap GEBHARDT FANS, NICOTRA RER 17-1000 RD/0 ( RER17-1000RD/0 ) Motor : AC-MOTOREN GmbH Type ACA 132M-4/HE 7,5 kW 1460 r...

PAGUS roller conveyor

• Manufacturer: Pagus

Roller conveyor, conveyor belt PAGUS 4070 x 460 mm Belt gear ratio: approx. 1 : 1.5 Gear motor: SEW R32DT80K4 0.55 kW 102 rpm 230 / 400 V 3AC 50 Hz used ! tested !

HYDAC cooling unit

• Manufacturer: Hydac

Cooling unit, cooling water recooler HYDAC Type BL 058 - 41 RFCS-BL-58/1.0/W/400-50-3/A/1/FM/001 400 V 3AC 50 Hz IP44 Spare part e.g. for machining center HECKERT CWK400 D ! used, tested !

2014 Control weigher Mettler-Toledo Garvens Type XS 2

• Manufacturer: Garvens
• Model: XS 2

Artikel# 2372 Checkweigher Manufacturer Mettler-Toledo Garvens GmbH Type XS2 Year of manufacture 2014 Max. 200 g Min. 0 g Belt speed 40 m/min. Last test report 06/2025 Pneumatic ejector for: – Length measureme...

50m Festo 546286 PAN-8X1.25-NT (TPE-A) plastic hose

• Manufacturer: Festo

The Festo PAN-8X1.25-NT is a robust pneumatic hose designed for high-cycle applications such as energy chains. It features an outer diameter of 8 mm and an inner diameter of 5.9 mm, offering an excellent balance ...

2,000 liter ZKG tanks / storage tanks / beer tanks / pressure tanks in V2A 16-00330-3L 16-00330-3L

Cat. no.: 16-00330-3L Condition: New Units: 1 Eurolux ZKG tanks / storage tanks / beer tanks / pressure tanks in V2A with cooling jacket and with insulation Test pressure: 2.86 bar, operating pressure: 2 bar Top ...