Processing » Germany

Search By Category

Search By Manufacturer

Search By State

Building Filters

3360

Used controllers in Germany

  • 2009 Hoffmann GmbH Wurzach LIFTKET

    2009 Hoffmann GmbH Wurzach LIFTKET 020/53

    • Manufacturer: Hoffmann

    250 kgHook 6.0 m/min Dimensions: 420 x 210 x 350 mm | Connection value: 400V, 50Hz, 0.55KW, 24V control

    Laberweinting, Germany
  • AAA Plant Engineering AG (Switzerland)

    AAA Plant Engineering AG (Switzerland) Stainless steel process plant on skid basis

    • Manufacturer: AAA Anlagenbau AG (Schweiz)

    This high-quality Stainless steel process plant on skid basis was by AAA Plant Construction Ltd (Switzerland) manufactured and is equipped with numerous fittings, sensors and control components from well-known ma...

    Grenzach-Wyhlen, Germany
  • Kaeser AIRBOX 550 OIL.FREE Piston

    Kaeser AIRBOX 550 OIL.FREE Piston Compressor

    • Manufacturer: Kaeser

    The KAESER AIRBOX 550 OIL-FREE This is a high-quality, oil-free piston compressor for industrial compressed air applications. With a power output of 3.0 kW, a delivery rate of 0.32 m³/min, and a maximum operating...

    Grenzach-Wyhlen, Germany
  • Trusted Seller
    2002 PILLER Uniblock UB-V 1500

    2002 PILLER Uniblock UB-V 1500

    • Manufacturer: PILLER

    This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consis...

    Leipzig, Germany
  • Trusted Seller
    2004 DGS SYSTEM GMBH KBF

    2004 DGS SYSTEM GMBH KBF 325

    • Manufacturer: DGS SYSTEM GMBH
    • Power requirement: 0.37 kW

    Scraper belt conveyor combined with cooling water system and torque shut-off Discharge length D=280mm Chip infeed width F=325mm Insertion height B=approx. 160mm Insertion height B+I=220mm Chip infeed width F1=300...

    Leipzig, Germany
  • Trusted Seller
    2007 Sermeto 01

    2007 Sermeto 01

    • Manufacturer: Sermeto
    • Power requirement: 2.8 kW

    Slat-band conveyor very good, little used condition. Cooling water tank 1300 x 2050 x 260mm discharge length D=500mm Total chip intake length approx. AX= 4120mm with sheet metal tray with rubber coating, width 23...

    Leipzig, Germany
  • Trusted Seller
    Miltenyi gentleMACS Dissociator Automated Homogenizer

    Miltenyi gentleMACS Dissociator Automated Homogenizer 2 Sample 130-093-235(2021)

    • Manufacturer: Miltenyi Biotec

    Manufacturer: Miltenyi Biotec Model: gentleMACS Dissociator Item number: 130-093-235 Year of manufacture: 2021 S/N: 06345 gentleMACS Software V1.02 Description: The Miltenyi gentleMACS Dissociator is an automated...

    $4,231 USD
    Schönwalde-Glien, Germany
  • Trusted Seller
    Purete inert dryer MY 4106

    Purete inert dryer MY 4106 103840

    • Manufacturer: Purete

    Workpiece width min-max mm: 250-620 | Workpiece length min- max mm: 250-3050 | Workpiece height min- max mm: 0-100 | Working width max mm: 620 | Number of lamps: 1 | Kw power 1 lamp: 16,8 | Lamp length mm: L750 ...

    Petershagen, Germany
  • Trusted Seller
    COSMOTEC cooling unit

    COSMOTEC cooling unit

      Cooling unit, cooling system, cooler COSMOTEC, STULZ WRA4541221ZCS1 7035 used, tested !

      $1,304 USD
      Zschepplin, Germany
    • 2023 Rockmaster Tornado 5

      2023 Rockmaster Tornado 5

      • Manufacturer: Rockmaster

      The Tornado light material separator stands on a robust roll-off container frame and is therefore very easy to transport and can be used flexibly anywhere. A major advantage is the integrated pre-screening, which...

      Quickborn, Germany
    • Trusted Seller
      1986 EXNER H4SP 150 F

      1986 EXNER H4SP 150 F

      • Manufacturer: Exner
      • Power requirement: 18.5 kW

      Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Pressure: 150t | Quantity of oil: 480l | Tracking travel: 30mm | Safety distance: 180mm | Total power requi...

      Günzburg, Germany
    • Trusted Seller
      Burner

      Burner

        Additional title: Oil and gas burner | Performance: 4100 kW | Heating oil el: 344 kg/h | Suction pressure: 15 bar | Power: 11,86 kW | Voltage: 400 V nominal voltage, 230 V control voltage | Frequency: 50 Hz

        Freising, Germany
      • Trusted Seller
        1992 Gessner 1CB 0206 B101

        1992 Gessner 1CB 0206 B101

        • Manufacturer: Gessner

        Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the executi...

        Leipzig, Germany
      • Trusted Seller
        Kerabedarf Kleinofenbau Berlin RVO RTT

        Kerabedarf Kleinofenbau Berlin RVO RTT

        • Manufacturer: Kerabedarf Kleinofenbau Berlin
        • Power requirement: 0.75 kW

        on sale as is! inner lining with Shamrock, shamrook has slightly cracks. i.D.

        Leipzig, Germany
      • Trusted Seller
        1992 PRESSLUFT FRANTZ ES 20

        1992 PRESSLUFT FRANTZ ES 20

        • Manufacturer: PRESSLUFT FRANTZ
        • Power requirement: 15 kW

        compact construction with integrated filter techn. details - max. operational pressure of the tank 11,5bar - operation voltage 380V - filter make Balwin type BT 364 slightly damaged covering, besides that top use...

        Leipzig, Germany
      3637383940

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.