Processing » Germany

Search By Category

Search By Manufacturer

Search By State

Building Filters

1380

Used side in Germany

  • Trusted Seller
    1994 Dietz vacuum turbine HRD

    1994 Dietz vacuum turbine HRD 2/5 T 97067

    • Manufacturer: Dietz Vakuumturbine

    Engine power kw: 9.0 / 5.2 amps | Speed umin: Flyglrad / 5550 engine 2880 / Umin | V-belt drive motor: Yes | Suction side mm: 90 | Blow-out side mm: 90 | Weight approx. kg: 100 | Explosion-proof: Yes

    Petershagen, Germany
  • Trusted Seller
    1991 Calorifer AG Stainless Steel

    1991 Calorifer AG Stainless Steel Shell and Tube Heat Exchanger

    • Manufacturer: Calorifer AG

    750 liters; 210 liters. Solvent Nitrogen VA stainless steel heat exchanger shell and tube heat exchanger cooler used. connections: DN32/42.4 PN10 DN125/139,7 PN16 Material 1.4571 Tube outer diameter approx. 25 mm...

    Riesa, Germany
  • Trusted Seller
    1991 Calorifer AG Stainless Steel

    1991 Calorifer AG Stainless Steel Shell and Tube Heat Exchanger

    • Manufacturer: Calorifer AG

    190 liters; 21 liters. Solvent Nitrogen VA stainless steel heat exchanger shell and tube heat exchanger used. connections: DN32/42.4 PN16 DN125/139,7 PN16 Material 1.4571 inner tubes outer diameter approx. 20 mm ...

    Riesa, Germany
  • Trusted Seller
    1991 Calorifer AG Stainless Steel

    1991 Calorifer AG Stainless Steel Shell and Tube Heat Exchanger

    • Manufacturer: Calorifer AG

    190 liters, 21 liters. Solvent Nitrogen VA stainless steel heat exchanger shell and tube heat exchanger cooler used. connections: DN32/42.4 PN16 DN125/139,7 PN16 Material 1.4571 inner tubes outer diameter approx....

    Riesa, Germany
  • Trusted Seller
    1990 Piller RG 11 vacuum

    1990 Piller RG 11 vacuum turbine 90799

    • Manufacturer: Piller

    Diameter suction side mm: Kw 4,75 | Engine power kw: Speed 7000 | Air flow approx. m³ / h: was installed in grinding machine | Speed umin: 0.42 m³ / s | Direct drive: Diecast housing | V-belt drive motor: Suctio...

    Petershagen, Germany
  • Trusted Seller
    GEPPERT drive unit for agitator,

    GEPPERT drive unit for agitator, without motor

      Drive unit for agitator, without motor GEPPERT RÜHRTECHNIK GmbH LRK502 /7,5-2 Hole circle diameter (motor side): Ø 215 mm, 4x threaded hole: M12 x 1.75, depth: 20 mm Shaft diameter: Ø 50 mm, groove width: 15 mm w...

      $417 USD
      Zschepplin, Germany
    • Trusted Seller
      compressed air dryer

      compressed air dryer

      • Manufacturer: BOGE KOMPRESSOREN

      Operating pressure: 16 bar compressed air side | Operating temperature: 60 °C compressed air side | Power: 0,33 kW | Voltage: 230 V | Frequency: 50 Hz

      Freising, Germany
    • Trusted Seller
      NH3 condensers

      NH3 condensers

      • Manufacturer: Kelvion Holding GmbH

      Additional title: plate heat exchanger | Operating pressure side 1: 10 bar | Operating pressure side 2: 25 bar | Operating temperature: 90 °C | Weight: 936 kg | Base construction: on frame

      Freising, Germany
    • Trusted Seller
      Festo 554255 ADNGF-40-50-P-A Compact Cylinder

      Festo 554255 ADNGF-40-50-P-A Compact Cylinder ADNGF4050PA

      • Manufacturer: Festo

      The Festo compact cylinder ADNGF-40-50-P-A with the article number 554255 is a double-acting pneumatic cylinder with elastic damping rings at both ends. The damping rings improve peak energy absorption at end pos...

      $185 USD
      Borken, Germany
    • Trusted Seller
      2009 WTK CF270 CA2P

      2009 WTK CF270 CA2P

      • Manufacturer: WTK

      2x screw compressors 3x tube heat exchanger Screw compressor unit semi-thermal air conditioning compressor compressor chiller 2 x 30 Kw electric for air conditioning. 400 V; 277/398 A; 50 Hz; IP54 Rated power 3x ...

      Riesa, Germany
    • Trusted Seller
      NH3 condensers

      NH3 condensers

      • Manufacturer: Kelvion Holding GmbH

      Additional title: plate heat exchanger | Operating pressure side 1: 10 bar | Operating pressure side 2: 25 bar | Operating temperature: 90 °C | Weight: 936 kg | Base construction: on frame

      Freising, Germany
    • Trusted Seller
      2005 Grassi Compact 160 Laminator

      2005 Grassi Compact 160 Laminator

        Format (automatic): Min. 500 (W) x 500 (L) mm Max. 1.400 (W) x 1.400 (L) mm Format (manual): Min. 500 (W) x 500 (L) mm Max. 1.400 (W) x 2.200 (L) mm

        Cologne, Germany
      • Trusted Seller
        glycol cooler

        glycol cooler

        • Manufacturer: vbw-weihenstephan

        Additional title: plate heat exchanger | Operating pressure side 1: 16 bar | Operating pressure side 2: 16 bar | Operating temperature: 90 °C | Weight: 638 kg | Base construction: on frame, insulated

        Freising, Germany
      • Trusted Seller
        glycol cooler

        glycol cooler

        • Manufacturer: vbw-weihenstephan

        Additional title: plate heat exchanger | Operating pressure side 1: 16 bar | Operating pressure side 2: 16 bar | Operating temperature: 90 °C | Weight: 638 kg | Base construction: on frame, insulated

        Freising, Germany
      • Trusted Seller
        Thermotec PX06 liquid cooler refrigeration

        Thermotec PX06 liquid cooler refrigeration system air conditioning hall heating heating

        • Manufacturer: Thermotec NV

        Maximum permissible pressure Water Electrical data

        $8,410 USD

        Get financing

        Est. $165/mo

        Borken, Germany
      56789

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.