Processing » Hamburg

Search By Category

Search By Manufacturer

Building Filters

504

Used Processing in Hamburg, Germany

  • 1961 Hensel/Burkhardt Brückensäge 113A-

    1961 Hensel/Burkhardt Brückensäge 113A-

    • Manufacturer: Burkhardt-Hensel

    Bridge saw Cutting depth 270mm Cutting length approx. 4000mm Table surface 2500mm x 1000mm Two new blades (630mm) Three used blades (700mm) New cutter (d=350mm / wide 30mm), Steel foundations for screwing on More...

    Hamburg, Germany
  • 2006 Donatoni QUADRIX SPD-

    2006 Donatoni QUADRIX SPD-

    • Manufacturer: Donatoni
    • Model: Quadrix

    Bridge saw Saw blade head inclination from 0-180° for carrying out: - Longitudinal cuts - Transverse cuts - Diagonal cuts - Shaping - Curves - Fixed table 3,500 x 2,100 mm in a stable steel construction. - Saw b...

    Hamburg, Germany
  • 2007 GMM Brio 35 TO-

    2007 GMM Brio 35 TO-

    • Manufacturer: GMM
    • Model: Brio 35

    Bridge saw monoblock 4 axes Maximum saw blade diameter: 625 mm Saw blade speed converter Laser Tilt table Condition: Excellent Voltage: V. 400 Hz 50 More used machines at: www.janssen-usedmachines.com New stone p...

    Hamburg, Germany
  • 2020 MEC IMP AUT PX+P4+PX

    2020 MEC IMP AUT PX+P4+PX

    • Manufacturer: MEC

    Complete, fully automatic stone splitting system MEC IMP AUT consisting of 3 stone splitting machines and a waste conveyor PX + P4 + PX PX 1900 x 500 P4 950 x 400 Max. 1800 x 550 mm More used machines at: www.jan...

    Hamburg, Germany
  • 2020 Matec 10-

    2020 Matec 10-

    • Manufacturer: Matec

    Complete water treatment system with 10 filter plates Was not used after installation, in mint condition Filter plate size 800 x 800 mm Siemens control system Thickener Various pumps Dimensions +/- 3000 x 1650 mm...

    Hamburg, Germany
  • 2003 BAVELLONI Egar 315-4 Ts-

    2003 BAVELLONI Egar 315-4 Ts-

    • Manufacturer: Bavelloni
    • Model: Egar

    CNC machining center Interpolated axis 4 KW 9.6 X-axis mm. 2,730 Y-axis mm. 1,620 Software Cad Cam Easycad Steep taper ISO 40 Tool magazine positions 19 Voltage V.400 Hz 50 More used machines at: www.janssen-used...

    Hamburg, Germany
  • 2002 SIMEC NT2/2M-

    2002 SIMEC NT2/2M-

    • Manufacturer: Simec

    Block Cutter Maximum input block size: 2,300 x 3,400 x 2,100 mm Maximum number of vertical saws: 2 Maximum vertical saw blade diameter: 1,700 mm Minimum vertical saw blade diameter: 1,000 mm Maximum horizontal sa...

    Hamburg, Germany
  • 2020 Omag Area Cut-

    2020 Omag Area Cut-

    • Manufacturer: Omag

    5-axis CNC bridge saw with 5-axis head 100 hours of operation (as new) Siemens CNC control 1 vacuum cleaner for separating the workpieces is located behind the head R 1/2" connection in the motor shaft Max. saw b...

    Hamburg, Germany
  • 2007 Intermac MASTER 23 M

    2007 Intermac MASTER 23 M ( marble )

    • Manufacturer: Intermac
    • Model: Master 23

    3-axis CNC machining center Including multiple suction cups and cones Machine bed size: 2500 x 1200 mm Z-axis: 275 mm Machine dimensions: L: 4700 mm W: 2680 mm, H: 2680 mm Electric spindle: 9.2 kW Max. electric s...

    Hamburg, Germany
  • 2005 Dr. Kronenberger -

    2005 Dr. Kronenberger -

    • Manufacturer: Dr. Kronenberger

    Complete water treatment including all pumps Pre-clarification tank Septic tank 1 new sludge container of approx. 5m³, the fine metal grid in the container works like a coffee filter, the water runs out the botto...

    Hamburg, Germany
  • 2011 BRETON SMART-CUT S/NC 800

    2011 BRETON SMART-CUT S/NC 800

    • Manufacturer: Breton
    • Model: Smart Cut

    Bridge saw with interpolating axes. Rotating head and fixed work table. Suction cup pick-and-place system. Latest generation SIEMENS NC. Rotating head with ± 190° rotation around axis "C" and 0° to 90° rotation a...

    Hamburg, Germany
  • GMM Tecna 36 A-

    GMM Tecna 36 A-

    • Manufacturer: GMM
    • Model: Tecna 36

    Bridge saw for granite - Refurbished with 6 months warranty. Installation and training can be carried out at an extra cost. Maximum horizontal stroke 3600 mm Maximum vertical stroke 400 mm Maximum bridge stroke 3...

    Hamburg, Germany
  • 2004 Pedrini Arco di trionfo

    2004 Pedrini Arco di trionfo M594 -56-

    • Manufacturer: Pedrini

    Block cutter for granite Diameter of diamond disks: 1000/1300 mm Horizontal disk diameter: 350 mm, Vertical disk motor: 200 kW, Horizontal motor: 15 Kw, Number of vertical disks: 56, Automatic unloading units mod...

    Hamburg, Germany
  • 2008 Guglielmi 150 VNT.HV.SH-

    2008 Guglielmi 150 VNT.HV.SH-

    • Manufacturer: Guglielmi

    Horizontal splitting machine Width max. material: 440 mm, Working direction: From right to left, Number of spindles: 4, Disc diameter: 625 mm, Working thickness: From 20 mm to 80 mm. Drive spindles: 15 Kw Automat...

    Hamburg, Germany
  • 2010 Prussiani Champion 60-

    2010 Prussiani Champion 60-

    • Manufacturer: Prussiani
    • Model: Champion

    CNC 5-axis monoblock bridge saw with vacuum lifting system Vacuum lifter for automatic loading Tilt table X-axis 3,500 mm Y-axis 2,200 mm Z-axis 300 mm 5-axis head from 0° to 90° CAD/CAM software Wcam2k More used...

    Hamburg, Germany
2324252627

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.