Processing » Hiroshima

Search By Category

Search By Manufacturer

Building Filters

622

Used process in Hiroshima, Japan

  • Multitubular heat exchanger

    Multitubular heat exchanger

      Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One

      Hiroshima, Japan
    • 1998 [Daiko Kakoki] Conical Dryer

      1998 [Daiko Kakoki] Conical Dryer 1000L

      • Manufacturer: Daiko Kako Kako Kikai

      Can body 1200φ×1837 Design pressure: FV vacuum inside can ~3Kg / Jacket 3kg

      Hiroshima, Japan
    • Dalton DV-1-100

      Dalton DV-1-100

      • Manufacturer: Dalton

      Total capacity: 220L with butterfly valve Power: 0.75KW | Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: 1 unit

      Hiroshima, Japan
    • 2000 Kohken Powtech FS-J01-S

      2000 Kohken Powtech FS-J01-S

      • Manufacturer: Kohken Powtech Co.

      Capacity: 20Kg/h max. ⇓Test run video⇓. Power: 0.4Kw200V | Quantity saved: 1

      Hiroshima, Japan
    • 2007 Buhler SDV 1100

      2007 Buhler SDV 1100

      • Manufacturer: Bühler

      Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...

      Hiroshima, Japan
    • 2006 uzax 1050l

      2006 uzax 1050l

      • Manufacturer: yooxax

      Material: SS | Quantity saved: One

      Hiroshima, Japan
    • 2006 Veolia CMF12

      2006 Veolia CMF12

      • Manufacturer: Suez WTS / Veolia

      PP hollow fiber membrane module (1.5m2 x 12 modules) ＜Basic design Leachate (after pretreatment, PH 6-9, water temperature 2-35°C, turbidity ava < 30°C) in continuous operation for 24 hours (backwash interval 60 ...

      Hiroshima, Japan
    • 1999 Mitsubishi Kakoki SJ-50F

      1999 Mitsubishi Kakoki SJ-50F

      • Manufacturer: Mitsubishi

      6500 rpm, 5520 L/h, explosion-proof specification Previous experience: refining fuel oil (C fuel oil) We only have enough for one set of disassembling tools, so the remaining two units will be purchased or manufa...

      Hiroshima, Japan
    • Magellan PT-60

      Magellan PT-60

      • Manufacturer: Mazellar

      混合量：60L 備考 カタログ Power: 0.2kw | Material: Main section SUS | Quantity saved: One

      Hiroshima, Japan
    • 1996 HAKKO INDUSTRIES (now GL

      1996 HAKKO INDUSTRIES (now GL HAKKO) 6000L

      • Manufacturer: Hakko

      Explosion-proof, cyclo reducer (reduction ratio 1/15). Shaft seal: mechanical seal. Maximum pressure of main unit: FV to 0.18 MPa / Jacket: 0.54 MPa. Design temperature: [Body] -20 to 170°C / [Jacket] -20 to 200°C.

      Hiroshima, Japan
    • Mutual Sangyo RM-1000

      Mutual Sangyo RM-1000

      • Manufacturer: mutual industry

      Capacity: 660L Gear ratio: 1/30 Lower discharge (slide gate type) Click here to see a video of the test run (YouTube) upon completion of the maintenance.

      Hiroshima, Japan
    • Four stirrer paddles

      Four stirrer paddles

        Four paddle blades × 2 steps Motor: 11kw / 440v Power: 11kw | Material: Wetted part: SUS | Quantity saved: 1

        Hiroshima, Japan
      • SUS tank with coil

        SUS tank with coil

          Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)

          Hiroshima, Japan
        • Asada Ironworks MHK-20

          Asada Ironworks MHK-20

          • Manufacturer: Asada Ironworks

          Due to long-term storage after maintenance, immediate delivery is not possible, but delivery can be made in a short period of time. Hydraulic unit available Drawings available

          Hiroshima, Japan
        • Tokyo Coki MT-CD-2

          Tokyo Coki MT-CD-2

          • Manufacturer: Tokyo Corki

          Cooling and drying equipment in which cooling water or hot water is passed through a jacketed stainless steel trough, and cooled and dried as it is moved. The material rises from the lower vane to the upper disch...

          Hiroshima, Japan
        2425262728

        Overview

        Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

        FAQ

        What should I consider when buying used processing equipment?

        Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

        How do I arrange shipping for processing equipment?

        Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

        What is the typical maintenance for processing equipment?

        Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.