Processing » Hiroshima

Building Filters

38

Used controller in Hiroshima, Japan

  • 2008 Inoue BDM-50

    2008 Inoue BDM-50

    • Manufacturer: 井上製作所

    Agitator: High-speed turbine 2.2kw/variable speed Low-speed butterfly 1.5kw/ variable speed Hydraulic unit: 1.5kw Oil rotary vacuum pump: 0.75kw 2 tanks, 1 control panel

    Hiroshima, Japan
  • IHI T × 150

    IHI T × 150

    • Manufacturer: IHI

    Motor: 150kw/3000v 50Hz Discharge volume: 25.8m3/h Discharge pressure: 0.69Mpa with cooling tower control panel Discharge pressure: 0.69Mpa Discharge volume: 25.8m3/min

    Hiroshima, Japan
  • Tanabe AT-48

    Tanabe AT-48

    • Manufacturer: Tanabe

    Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...

    Hiroshima, Japan
  • Tikara Engineering 60 × 25

    Tikara Engineering 60 × 25 1/2 type

    • Manufacturer: Tikara Engineering

    Main unit, scraping unit, hydraulic unit Capacity: 610L Rotation speed: 840(600G)~970RPM(800G) During scraping: 11RPM Without control panel and filter cloth. Please contact us for availability. We can provide you...

    Hiroshima, Japan
  • 1998 Nissen WD-15-BS

    1998 Nissen WD-15-BS

    • Manufacturer: Nissen

    Body material: SUS316 with Teflon coating. Filter plate material: SUS316 with Hastelloy. Jacket material: SUS304. Maximum pressure: [Tank/jacket] vacuum to 3 kgf. Maximum temperature: [Tank/jacket] 132°C. Capacit...

    Hiroshima, Japan
  • Mitsui Seiki ZV15AS5-R type

    Mitsui Seiki ZV15AS5-R type

    • Manufacturer: Mitsui Seiki

    Soundproof type screw compressor 15KW 200/220V 50/60HZ Inverter control type Dryer built-in type Operation confirmed

    Kure, Japan
  • 1994 Bizen Koki VM-100

    1994 Bizen Koki VM-100

    • Manufacturer: Bizen Koki

    Capacity: 100L SUS304, Discharge: with butterfly valve Confirmed operation 3-phase 200/220V 50/60HZ The control panel is not installed because there are no contents. Installation cost of breaker/timer

    Kure, Japan
  • 1996 Belt conveyor (inclined type)

    1996 Belt conveyor (inclined type) ESCON

    • Manufacturer: Made by Sanki Kogyo (Tokushima Seiko)

    Mobile (with casters) Tilting type 3 phase 200/220V 1.5KW Equipped with a stirrer for thawing Foods, etc. Brewing rice and koji used to be transferred. Control panel is available.

    Kure, Japan
123

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.