Processing » Hiroshima

Building Filters

22

Used equipment in Hiroshima, Japan

  • Tada chemical equipment industry 50L

    Tada chemical equipment industry 50L

    • Manufacturer: Daiichi Bussan Co.

    Enclosed upper and lower mirrors With Bayer cyclo reducer Shaft seal gland packing Remarks *Pinhole test & repair will be installed if necessary.

    Hiroshima, Japan
  • 2009 [Kansai Chemical Machinery Manufacturing]

    2009 [Kansai Chemical Machinery Manufacturing] Ion-exchange resin column equipment No model

    • Manufacturer: Kansai Chemical Machinery Manufacturing Co.

    Internal volume: 0.24m3 x 2 units Operating pressure: 0.2 Mpa Operating temperature: 40°C Remarks 2000L dilite tank (with agitator) x 2 units

    Hiroshima, Japan
  • 2006 Liquid blending equipment

    2006 Liquid blending equipment

      Total capacity: 500L Preparation: 300L SUS Cylindrical vertical type, motor 2.2KW 220V For liquid agitation, mixing of food, oil and fat, etc. Belt drive type without jacket

      Kure, Japan
    • 1985 Matsumoto Kikai MARK III

      1985 Matsumoto Kikai MARK III 48×36

      • Manufacturer: Matsumoto Machinery

      Bottom discharge type Hydraulic system Hydraulic scraping device Main unit operation panel

      Kure, Japan
    • 2006 Veolia CMF12

      2006 Veolia CMF12

      • Manufacturer: Suez WTS / Veolia

      PP hollow fiber membrane module (1.5m2 x 12 modules) ＜Basic design Leachate (after pretreatment, PH 6-9, water temperature 2-35°C, turbidity ava < 30°C) in continuous operation for 24 hours (backwash interval 60 ...

      Hiroshima, Japan
    • ［Ion-exchange resin column (no model)

      ［Ion-exchange resin column (no model)

      • Manufacturer: Kansai Chemical Production

      Yang 50L, Yin 70L. Material: PVC | Quantity saved: One

      Hiroshima, Japan
    • 2009 Nippori Engineering DD-40NX6-0

      2009 Nippori Engineering DD-40NX6-0

      • Manufacturer: Nippon Polymer Engineering Co.

      Treatment air volume 25m3/min

      Hiroshima, Japan
    • 1996 Koyo Giken PFU-0.5-30

      1996 Koyo Giken PFU-0.5-30

      • Manufacturer: Koyo

      Purchasing area: 60Hz | Quantity saved: 1

      Hiroshima, Japan
    • Aikosha Manufacturing AM-90

      Aikosha Manufacturing AM-90

      • Manufacturer: Aikosha Manufacturing Co.

      With ON/OFF switch & timer. Spare blades available.

      Hiroshima, Japan
    • Air cleaner

      Air cleaner

        Quantity saved: One

        Hiroshima, Japan
      • ［Deodorizing furnace No model

        ［Deodorizing furnace No model

        • Manufacturer: Tokai Steel

        Processing gas amount: 3000 m 3 / h Deodorizing temperature: 700 ° C. Exhaust gas amount: 6000 m 3 / h Exhaust gas temperature: 350 ° C.

        Hiroshima, Japan
      • Japan filtration device 600 type

        Japan filtration device 600 type x 20 rooms

        • Manufacturer: Japanese filtration equipment

        Main unit only Filtration area: 10 m2 Filtration volume: 0.075 m3 If you perform maintenance, it will be replaced by a different one.

        Hiroshima, Japan
      • Japan Filtration System 390m/m x

        Japan Filtration System 390m/m x 9 chambers ES2C type

        • Manufacturer: Japanese filtration equipment

        Specifications: Huffing area: approx. 2 m2 Huffing capacity: approx. 15L Cake thickness 15mm Huffing pressure 0.4MPa Tightening pressure 50MPa Remarks:[High pressure]. Maximum working pressure 72MPa Discharge vol...

        Hiroshima, Japan
      • Hitachi Industrial POD-3.7MNP6

        Hitachi Industrial POD-3.7MNP6

        • Manufacturer: Hitachi

        Reciprocating compressor 3.7KW 200V 0.93Mpa instruction manual included

        Kure, Japan
      • Tokyo Coki MT-CD-2

        Tokyo Coki MT-CD-2

        • Manufacturer: Tokyo Corki

        Cooling and drying equipment in which cooling water or hot water is passed through a jacketed stainless steel trough, and cooled and dried as it is moved. The material rises from the lower vane to the upper disch...

        Hiroshima, Japan
      12

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.