Used a frames in Illinois, USA

Fluid Air Mill Hammer 014

• Manufacturer: Fluid Air
• Model: 014

Fluid Air, Model 014, stainless steel hammer mill. Equipped with 7½" diamter feed throat into 14" long milling chamber with a (4) arm beater bar and has 3" diameter discharge pipe and is powered by 20 Hp motor dr...

Smalley Conveyor Table Top STORVEYOR

• Manufacturer: Smalley

Smalley model Storveyor, storage conveyor. Equipped with 238" long x 31" wide Intralox belt with 49" discharge height, 31" high stainless steel product containment walls, (6) 6" wide x 36" long product access p...

Tank Processors 10 GALLON

10 gallon, 316 stainless steel, low pressure jacket, process tank. Vessel dimensions: 14" ID x 16½" total depth with a 14" straight wall. Equipped with bolt down lid, magnetic prop agitation powered by a .33 hp d...

Fitzmill Mill Hammer FAS020

• Manufacturer: Fitzmill
• Model: FAS020

Fitzmill, Model FASO20, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 12" diameter charge port, (48) fixed stepped impact blades powered by a ...

Axon Shrink Tunnels EZ 36

• Manufacturer: Axon

Axon, Model EZ-36-SR-7-8, stainless steel over the conveyor convection air neck band shrink tunnel, with number of product per minute – depending on materials and application. Total Aperture: 12" in Height; 7-1/2...

TRIpack Shrink Tunnels HT-2

• Manufacturer: Tripack

TRIpack stainless steel over the conveyor convection air neck band shrink tunnel. Product per minute – depending on materials and application. Total Aperture: 12" in Height; 10" in Width. Tunnel: 60" in Length. E...

Span Tech Conveyor Table Top 90°

• Manufacturer: Span Tech

Span Tech, 90°, stainless steel, 8½" wide x 265" long flexlink curved conveyor. Product travels 93" into a 90° curve then travels another 172" before discharging. Infeed and discharge height range: 32½" to 38½". ...

Stainless Specialist Feeder Incline/Cleated 29¾"W X 230"L

• Manufacturer: Stainless Specialist

Stainless Specialists, 29¾" wide x 230" long, inclined cleated conveyor. Equipped with a 20" infeed height, 29¾" wide white plastic conveyor belt with 3" high x 26" wide cleats set on 4" centers. Conveyor has a 2...

Fitzmill Mill Hammer DAS06

• Manufacturer: Fitzmill
• Model: DAS06

Fitzmill, Model DAS06, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 20" wide x 20" long x 4" deep feed pan, (16) fixed knife / impact blades ...

Cherrys Industrial Equipment Material Handling Pallet Inverter SC75P

• Manufacturer: Cherrys Industrial Equipment C

Cherry’s Industrial, Model SC75P, free standing, single clamp, 180° hydraulic pallet inverter. Load Capacity: up to 4,000 lbs. Equipped with 49" Long x 49" Wide load table, 42" minimum to 75" maximum jaw opening ...

Fitzmill Mill Hammer DAS06

• Manufacturer: Fitzmill
• Model: DAS06

Fitzmill, Model DAS06, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 20" wide x 20" long x 4" deep feed pan, (16) fixed knife / impact blades ...

Conveyor Laner RCP2

• Manufacturer: Abbe

Stainless steel, 48" wide x 120" long, belt conveyor with servo controlled laner cylinders. Equipped with a 48" wide x 120" long Neoprene style belt with a 31" to 36" infeed / discharge height powered by a 3 hp c...

Franklin Miller Mill Hammer S4

• Manufacturer: Franklin

Franklin Miller, model S4 delumper. Equipped with 43½" wide x 32" long x 40" deep product hopper, 8½" diameter x 12" long rotary cylinder powered by a 5 HP motor and 12" x 12" discharge with 64" ground clearance....

Marion Mixer Powder Paddle S.S. HPS4272

• Manufacturer: Marion

Marion Model HPS 60 ft³ 316 stainless steel paddle mixer. Chamber dimensions: 72" in Length; 42" in Width; 53" in Depth. Equipped with three section hinged lid, safety grates, two 6" diameter charge ports, 5"dia...