Used test in Indiana, USA

Proctor & Schwartz Hydraulic Powered Swivel Arm Feed Conveyor Food Processing

• Manufacturer: Proctor & Schwartz

In Good Used Condition. Tested OK. Hydraulic Swivel Arm Mounted Conveyor. Stainless Conveyor was used in food processing plant. Swivel unit rotates up to 90 degrees left and right. 10 Gal hydraulic tank power u...

58"x 20' Powered Pallet Conveyor 4" Roller 54"BF 1Hp Chain Drive 40 FPM

Conveyor Sections In Good Used Condition. Tested and running. 460V. Sprocketed roller chain drive type. Rollers have some rust. Conveyor consists of 4 sections. Each section has a drive. 5' 1" section lengths....

Heidelberg NP 226 Incline Belt Conveyor 9"Belt 34"Load 54"Disp. Variable Speed

• Manufacturer: Heidelberg

Tested in good working condition 2 separate 9" wide belts The sides can be adjusted out to 13" max There are 2 straightening sides on the top flat part that move in and out ( the bracket for the one paddle is bro...

Alvey 28"x 17' Slider Bed 24" Belt Incline Conveyor Variable Speed Drive 460V

• Manufacturer: Alvey

Conveyor In Good Used Condition. Tested in our shop. -Conveyor was dropped off a forklift and bent the support frame. Was bent back as good as possible does not affect the function of the conveyor- Conveyor is s...

Automotion 7' X 24"Power Roller Conveyor V-Belt Drive w/VFD And Box Straightener

• Manufacturer: Automotion

Tested in good working condition VFD input power is 400-480 volt 3 phase 7' Power Roller Conveyor V-Belt Drive Rollers are 21" long and 1-7/8" diameter 3" center Conveyor is powered by a 1.5 hp motor controlled ...

Incline Belt Conveyor Parts Feed Chute 16"x 60"L 115V Variable Speed Drive

We clean and test all our conveyors before listing. Condition & Set-Up: In Good Used Condition. Tested OK. Aluminum conveyor frame with stainless feed chute on steel tube frame. Motor & Gearbox: Oriantal Motor ...

LaRos 19.5"W x 62"L Cleated Belt Incline Parts Conveyor 12"Bed 4-48FPM 115V

• Manufacturer: LaRos

Variable speed belt, Non-adjustable 47° Incline. Condition & Set-Up: In good working condition. Tested. Bolt-on steel frame with locking casters. Frame height is not adjustable. Bed Height (From Floor): Infee...

Hytrol 74"L Adj Incline Portable Parts Conveyor 18" Cleated Belt 115V 70FPM

• Manufacturer: Hytrol

Adjustable incline conveyor mounted on steel bolt-on frame with casters. Condition & Set-Up: In good working condition. Tested. Belt is worn and some of the cleats are missing and coming loose. Belt may need re...

EMI Plastics 23"W x 6'L Incline Cleated Belt Parts Conveyor 17"Bed 115V 1-21FPM

• Manufacturer: EMI

Variable speed belt and adjustable incline. Condition & Set-Up: In good working condition. Tested. Steel frame with adjustable incline. Locking casters on front legs. Conveyor incline also has adjustable pivo...

Magnetic Conveyor Bed Stainless Steel Replacement Bed 97mm W 13m Long 1mm Thick

• Manufacturer: Tomoegawa Wheeling

New Surplus, Acquired From Spare Parts Storeroom. Looks to be a replacement for a conveyor bed. Has rubber bumpers on the inside edge. 24mm wide 19mm deep Could be used for something else. We did not test the act...

Versa Powered Live Roller Case Pallet Conveyor 68"x 87" 3ph 46fpm Fork Pockets

• Manufacturer: Versa

Tested and working 1/2 hp 208-230/460v 3ph motor 68" exposed roller width 2 1/2" diameter rollers 2" between rollers 4 1/2" center to center Has 2, 6" fork pockets for unloading skids from the side 20 1/2" from t...

NKE 6"x 22" Double Belt Conveyor Small Parts Slow Feed Chute 220V 1FPM

• Manufacturer: NKE

In Good Used Condition. Removed from a Working Environment. Tested @220V 3PH. Conveyor was used as a parts feeder for vibratory sorter unit. This is a double unit, 2 conveyors mounted on steel frame. Conveyors ...