Processing » Japan

Search By Category

Search By Manufacturer

Search By Prefecture

Building Filters

347

Used controller in Japan

  • 2006 Paulec SFP-10

    2006 Paulec SFP-10

    • Manufacturer: Powrex

    Explosion-proof specifications With hot air generator, dust collector, control panel Container capacity: Approx. 21 L (total volume)

    Hiroshima, Japan
  • 1988 Tanabe AUT - 42

    1988 Tanabe AUT - 42

    • Manufacturer: Tanabe

    42" SUS316 Fully automatic bottom discharge type, hydraulically driven. No control panel. Hydraulic drive has been converted to motor drive.

    Hiroshima, Japan
  • 2007 Koyo Thermo System MB-181824

    2007 Koyo Thermo System MB-181824

    • Manufacturer: Koyo

    Maximum service temperature: 1100 ° C Common service temperature: 600 to 1000 ° C Temperature adjustment operation: PDI control with auto-tuning

    Hiroshima, Japan
  • 2016 IHI HS-255L

    2016 IHI HS-255L

    • Manufacturer: IHI
    • Model: HS

    4000 rpm/3500 G Nominal capacity: 2.5–3.5 t/h Backdrive specification (can be modified to single-motor specification) Control panel included

    Hiroshima, Japan
  • 2017 Chikara Engineering HANG48×800

    2017 Chikara Engineering HANG48×800

    • Manufacturer: Tikara Engineering

    Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 796G Scraping device hydraulically driven With control panel

    Hiroshima, Japan
  • Nippon Dryer HF-04

    Nippon Dryer HF-04

    • Manufacturer: japan dryer

    Overall dimensions: 2500 x 1100 x 1700H Internal dimensions: 1290 x 790 x 800H = approx. 800L Temperature control: up to 200°C

    Hiroshima, Japan
  • Araki Iron Works SRG-490

    Araki Iron Works SRG-490

    • Manufacturer: Araki Ironworks

    Motor: Dispersion 22Kw 4P200V (Explosion-proof) Agitation 7.5Kw Hydraulic 1.5Kw With hand control panel Remarks With inverter (2 pcs.)

    Hiroshima, Japan
  • Tanabe Wiltec TOP-48-80

    Tanabe Wiltec TOP-48-80

    • Manufacturer: Tanabe Wiltech

    Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 800G Scraping device air-driven With control panel (without regenerative resistor)

    Hiroshima, Japan
  • 2004 Hitachi Zosen TFAP-10-18MKII

    2004 Hitachi Zosen TFAP-10-18MKII

    • Manufacturer: Hitachi

    Fully automatic compression type 1000mm x 18 chambers Unmaintained, but in fairly good condition Complete books and control panel available Filtration area: 26.6 m2 Filtration volume: 306 L

    Hiroshima, Japan
  • 2007 Sumiyoshi Heavy Industries SJ

    2007 Sumiyoshi Heavy Industries SJ - 050

    • Manufacturer: Sumiyoshi heavy industry

    Working pressure: -80kPa Dry capacity: 500 liters Shaft speed: 11rpm (MAX) Stirring motor: 5.5kw Accessory: Control panel, water-sealed vacuum pump, cooling tower

    Hiroshima, Japan
  • Trusted Seller
    YAC DAStech LN2 DISPENSER

    YAC DAStech LN2 DISPENSER

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup Liquid Nitrogen Dispenser LN2 DISPENSER Liquid nitrogen dispensing equipment with 500 ml inner capacity! Small, lightweight and drip amount is adjustable to small amounts. Features 1. Preve...

    Saitama, Japan
  • Sugiyama Heavy Industries UA-160S

    Sugiyama Heavy Industries UA-160S

    • Manufacturer: Sugiyama Heavy Industries

    High-speed mixer Mixing capacity: MAX 1250L, buffed on the inside Motor: Tilting vane 90kw/220V Chopper 30kw/220v Jacket Remarks No control panel, main unit only

    Hiroshima, Japan
  • Yamato Seiki 300 liters

    Yamato Seiki 300 liters

    • Manufacturer: Yamato

    Motor: 11kw Vessel capacity: 300L (Vessel fixed type) Wetted part material: SUS with jacket Vacuum specification Remarks No control panel and vacuum pump. *Exhaust 2500L Large trestle is attached, but it can be r...

    Hiroshima, Japan
  • 2008 Makino BM-4000LDFJ-A-370MJR-V

    2008 Makino BM-4000LDFJ-A-370MJR-V

    • Manufacturer: Makino

    Capacity: 4000L Inverter speed change system Specifications/drawings available Control panel available Lining: Alumina porcelain brick Rotation speed during crushing：25±5r/min Rotation speed during discharge：15±5...

    Hiroshima, Japan
  • 2008 Inoue BDM-50

    2008 Inoue BDM-50

    • Manufacturer: Inoue Manufactory

    Agitator: High-speed turbine 2.2kw/variable speed Low-speed butterfly 1.5kw/ variable speed Hydraulic unit: 1.5kw Oil rotary vacuum pump: 0.75kw 2 tanks, 1 control panel

    Hiroshima, Japan
34567

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.