Processing » Japan

Search By Category

Search By Manufacturer

Search By Prefecture

Building Filters

3663

Used Processing in Japan

  • Trusted Seller
    2006 NISSEI FN280-100A

    2006 NISSEI FN280-100A

    • Manufacturer: Nissei

    Screw dia: 71mm | Shot volume: 1010cm3 | Distance between tie rods: 660x660mm

    Chiba, Japan
  • Trusted Seller
    2016 AIRMAN PDS670SD-4C5

    2016 AIRMAN PDS670SD-4C5

    • Manufacturer: Hokuetsu Kogyo

    Hours: 3531H | Specification: 0.7MPa.TRAILER TYPE

    Chiba, Japan
  • Trusted Seller
    2005 NIIGATA ALL ELECTRIC MD450S-IV

    2005 NIIGATA ALL ELECTRIC MD450S-IV

    • Manufacturer: Niigata
    • Model: MD450

    Screw dia: 76mm | Shot volume: 1588cm3 | Distance between tie rods: 810x810 | Daylight opening: 1550mm

    Chiba, Japan
  • Trusted Seller
    1999 AIRMAN PDSK900S

    1999 AIRMAN PDSK900S

    • Manufacturer: HOKUETSU

    Hours: 5977H | Specification: ENGINE: S6B3

    Chiba, Japan
  • Trusted Seller
    2006 NISSEI FN180-50A

    2006 NISSEI FN180-50A

    • Manufacturer: Nissei

    Screw dia: 56mm | Shot volume: 505cm3 | Distance between tie rods: 530x530mm

    Chiba, Japan
  • Trusted Seller
    2016 denyo dca-25lske

    2016 denyo dca-25lske

    • Manufacturer: Denyo
    • Model: DCA-25LSKE

    Hours: 5650H | Specification: 20.0/25.0KVA. ENGINE: V2403

    Chiba, Japan
  • Trusted Seller
    2015 NISSEI FNX140Ⅲ-36A

    2015 NISSEI FNX140Ⅲ-36A

    • Manufacturer: Nissei

    Screw dia: 50mm | Shot volume: 353cm3 | Distance between tie rods: 510x510

    Chiba, Japan
  • Trusted Seller
    1996 TADANO LS-106A

    1996 TADANO LS-106A

    • Manufacturer: Tadano
    • Model: LS-106A

    We accept repainting. Please feel free to contact us if you have a request for replacement or repair of this machine or parts.

    Chiba, Japan
  • Trusted Seller
    1993 TOSHIBA IS1300DEW-110A

    1993 TOSHIBA IS1300DEW-110A

    • Manufacturer: Toshiba
    • Model: IS1300

    Screw size: 115mm | Shot volume: 6560CM3 | Distance between tie rods: H1400 x V1400 | Daylight opening: 1850mm~2350mm

    Chiba, Japan
  • Trusted Seller
    2012 HAITIAN JU16000/31000J

    2012 HAITIAN JU16000/31000J

    • Manufacturer: HAITIAN

    Screw dia: 90mm | Piston screw dia: 200mm | Shot volume: 33615cm3 | Distance between tie rods: 1550mm x 1450mm

    Chiba, Japan
  • Trusted Seller
    2001 MITSUBISHI 3500MMⅢ-1100

    2001 MITSUBISHI 3500MMⅢ-1100

    • Manufacturer: Mitsubishi

    Screw dia: 200mm | Shot volume: 31400cm3 | Platen size: 2550mm x 2450mm | Distance between tie rods: 2000mm x 1800mm | Max daylight: 3700mm | Max clamp stroke: 2700mm | Mold thickness: 1000~1900mm | Shipping mas...

    Chiba, Japan
  • Trusted Seller
    2021 Hitachi Industrial Equipment Systems

    2021 Hitachi Industrial Equipment Systems ST-230C

    • Manufacturer: Hitachi Industrial Equipment Systems

    Machine specification ○ Capacity Capacity 230L Pressure 1.02MPa Receiver tank of standing type. Comment from sales representative The tank was used in an indoor research facility. Manufactured in 2021.

    Tokyo, Japan
  • Trusted Seller
    2021 Hitachi Industrial Equipment Systems

    2021 Hitachi Industrial Equipment Systems SRL-11DMNA5

    • Manufacturer: Hitachi Industrial Equipment Systems
    • Model: SRL-11

    Machine Specifications Low noise scroll type oil-free dryer built-in package type ○ Configuration Main unit SRL-5.5CB Dryer HDP-110A ○ Capacity Output 5.5x2 kW 3-phase 50Hz Maximum pressure 0.8MPa Blowing volume ...

    Tokyo, Japan
  • Trusted Seller
    AMANO VF-5NA

    AMANO VF-5NA

    • Manufacturer: Amano
    • Model: VF-5NA

    Machine Specifications ○Power/Output 100V Single-Phase 0.4kW 50Hz Only ○Capacity Suction Diameter φ63.5mm Filter 1.6㎡ Automatic Vibrating Dust Removal Bucket 6.5L ○Machine Size Sales Comments Make dust-producing ...

    Tokyo, Japan
  • Trusted Seller
    AMANO VF-5N

    AMANO VF-5N

    • Manufacturer: Amano
    • Model: VF-5N

    Machine Specifications ○Power/Output 100V Single-Phase 0.4kW 50Hz Only ○Capacity Suction Diameter φ63.5mm Filter 1.6㎡ Manual Vibration Duster Bucket 6.5L ○Machine Size Sales Comments Make dusty workplaces safe an...

    Tokyo, Japan
  • no-image_en.png

    Niigata MD450 Injection Molding

    • Manufacturer: Niigata
    • Model: MD450

    Good condition Niigata MD450 Injection Moldings manufactured in 2007. Located in China and other countries. Click request price for more information.

    China
910111213

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.