Processing » Japan

Search By Category

Search By Manufacturer

Search By Prefecture

Building Filters

347

Used controller in Japan

  • Trusted Seller
    YAC DAStech DAS850

    YAC DAStech DAS850

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup Forming Machines DAS850 Precision feed mechanism allows high positioning accuracy (several um). High rigidity and high output make forming difficult materials easy! Features 1. An astonishi...

    Saitama, Japan
  • Trusted Seller
    YAC DAStech DLS-3225

    YAC DAStech DLS-3225

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup 2-spindle Slicing Machines DLS-3225 Equipped with 2 spindles. Multi-gang blades of different dimensions allow rectangular dicing Features 1. 2-spindle mount! 2. Cuts with multi blade of bla...

    Saitama, Japan
  • Trusted Seller
    YAC DAStech DLS7125

    YAC DAStech DLS7125

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup Slicing Machines DLS7125 High-precision slicer capable of cutting large materials with multi-blades. Capacity to fit a maximum blade diameter of φ7" (177.8 mm) Features 1. Chuck table adjus...

    Saitama, Japan
  • Trusted Seller
    2003 Hitachi Industrial Equipment Systems

    2003 Hitachi Industrial Equipment Systems SRL-3.7DA5

    • Manufacturer: Hitachi
    • Model: SRL-3.7DA5

    Machine Specifications ○ Power source Three-phase 200V [for 50Hz] Oil-free/low noise/scroll type ○ Capacity Output 3.7kw, Max. pressure 0.83MPa Discharge air volume 400L/min Ambient temperature 5～40°C Noise level...

    Tokyo, Japan
  • 1995 Sanko Machinery SAM-MC101-RC+AF-4TC

    1995 Sanko Machinery SAM-MC101-RC+AF-4TC

    • Manufacturer: Sanko Machinery

    Voltage: 200V 60Hz Heater: 180 x 4 Includes six different types of measuring cups. No instructions or diagrams.

    Kure, Japan
  • 2012 Ogawara Works HDS-100

    2012 Ogawara Works HDS-100

    • Manufacturer: 大川原製作所

    Heating capacity: 110kw, Cooling capacity: 81kw Air blowing capacity: 3900Nm3/h, Heat source water volume: 231L/min Manufacturer's introduction page: Remarks Mainly composed of one CO2 hot air heat pump system, ...

    Hiroshima, Japan
  • Trusted Seller
    YAC DAStech DAS-65N

    YAC DAStech DAS-65N

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup Slicing Machines DAS-65N Improved type of our optimal model for precision machining of hard and brittle materials and metals. High mechanical rigidity and precision cutting enable high-load...

    Saitama, Japan
  • Trusted Seller
    YAC DAStech DFS1100

    YAC DAStech DFS1100

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup Fully Automatic Slicers DFS1100 Confidently cut thick materials such as glass, metal and ceramic with high accuracy and stability. Fully automated work processes from workpiece setting to c...

    Saitama, Japan
  • 1990 Makino BUN2-85

    1990 Makino BUN2-85

    • Manufacturer: Makino

    Used Makino BUN2-85 NC Vertical Milling Machine with copying (auto-tracing) attachment, manufactured in 1990. Features include a 1350 × 575 mm table, 850/500/400 mm travel, and a spindle speed range of 10 to 400...

    Japan
  • 1987 Makino BNI-85

    1987 Makino BNI-85

    • Manufacturer: Makino
    • Model: BNI-85

    Used Makino BNI-85 NC Milling Machine manufactured in 1987. Features a 1350×575 mm table, 850/500/400 mm travel, and a No.50 taper spindle capable of 2200 rpm. Spindle-to-column distance: 110–610 mm. Includes a...

    Japan
  • Trusted Seller
    YAC DAStech DAS-W65N

    YAC DAStech DAS-W65N

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup Slicing Machines DAS-W65N Best-seller model compatible with multi-gang blades of up to 200 mm width. Better accuracy with function to support both ends and suppress vibration and deflection...

    Saitama, Japan
  • Trusted Seller
    YAC DAStech DAS-W65F

    YAC DAStech DAS-W65F

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup Forming Machines DAS-W65F Shortening the flange length and function to support both ends enables high-precision, high-rigidity forming. Features 1. Ideal movement achieved from grinding sof...

    Saitama, Japan
  • Trusted Seller
    YAC DAStech DAS110

    YAC DAStech DAS110

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup Slicing/Dicing Machines DAS110 Cuts 30 mmt thick material in high precision! Obtain higher throughput than ever before. Features 1. High power spindle 2. Multi-gang blades 3. Auto θ axis au...

    Saitama, Japan
  • Trusted Seller
    YAC DAStech DAR810

    YAC DAStech DAR810

    • Manufacturer: YAC DAStech

    Cutting Machine Lineup Core Drill Machines DAR810 Numerous highly precise round shapes cut in a single process! Fully automatic machine is able to core faster and with higher efficiency. Features 1. Cuts round sh...

    Saitama, Japan
  • Trusted Seller
    ‘SUMITOMO’ Coil Preparation Line

    ‘SUMITOMO’ Coil Preparation Line

    • Manufacturer: Sumitomo

    The Coil Preparation Line, built in 1987 by Sumitomo Heavy Industries, represents a robust solution for processing low-carbon steel with high accuracy and efficiency. This line delivered reliable performance for ...

    Japan
12345

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.