Processing » Japan

Search By Category

Search By Manufacturer

Search By Prefecture

Building Filters

45

Used filtration in Japan

  • Japan filtration device 600 type

    Japan filtration device 600 type x 20 rooms

    • Manufacturer: Japanese filtration equipment

    Main unit only Filtration area: 10 m2 Filtration volume: 0.075 m3 If you perform maintenance, it will be replaced by a different one.

    Hiroshima, Japan
  • 2003 [YS Sten] Filtrate receiving

    2003 [YS Sten] Filtrate receiving tank (horizontal)

    • Manufacturer: Wyeth, Sten.

    0.27 m3 Teflon coating inside Material: Gluing section SUS | Quantity saved: １

    Hiroshima, Japan
  • Japan Filtration System 390m/m x

    Japan Filtration System 390m/m x 9 chambers ES2C type

    • Manufacturer: Japanese filtration equipment

    Specifications: Huffing area: approx. 2 m2 Huffing capacity: approx. 15L Cake thickness 15mm Huffing pressure 0.4MPa Tightening pressure 50MPa Remarks:[High pressure]. Maximum working pressure 72MPa Discharge vol...

    Hiroshima, Japan
  • 1995 Ryosei RD200-2-2.2M

    1995 Ryosei RD200-2-2.2M

    • Manufacturer: Ryosei

    Air volume: 200 m3/min Static pressure: 30 mmAq Shaking type

    Kure, Japan
  • 1998 Nissen WD-15-BS

    1998 Nissen WD-15-BS

    • Manufacturer: Nissen

    Body material: SUS316 with Teflon coating. Filter plate material: SUS316 with Hastelloy. Jacket material: SUS304. Maximum pressure: [Tank/jacket] vacuum to 3 kgf. Maximum temperature: [Tank/jacket] 132°C. Capacit...

    Hiroshima, Japan
  • Made by Kurita Machinery August

    Made by Kurita Machinery August 2024

    • Manufacturer: Made by Kurita Machinery

    Filtration plate: 610 x 610 square Filtration plate material: PP With diaphragm pump Manual open frame type

    Kure, Japan
  • Hokos NP-20D special model

    Hokos NP-20D special model

    • Manufacturer: Made by hocos

    Pulse jet type Filtration area: investigating | Electric motor: 0.75KW 200V 50HZ | Material: Made in SUS

    Kure, Japan
  • Makino F-101

    Makino F-101

    • Manufacturer: Makino

    Specifications:Fully automatic type converted to semi-automatic Filtration area: 14.5m2 Filtration volume: 200L Filtration plate dimensions: 650 x 650 x 18 chambers Filtration plate material: PP

    Hiroshima, Japan
  • 1984 Fuji Sangyo DLM-V 317

    1984 Fuji Sangyo DLM-V 317 H

    • Manufacturer: Fuji Sangyo

    Specifications: Filtration area: 2 to 8 m2 filtration area

    Hiroshima, Japan
  • 2006 Hitachi Zosen TFAP-10-32MKII

    2006 Hitachi Zosen TFAP-10-32MKII

    • Manufacturer: Hitachi Zosen Corporation

    Fully automatic compression type 1000mm x 32 chambers Filtration area: 47.4 m2 Filtration volume: 835L Hydraulic unit: 2.2kw

    Hiroshima, Japan
  • 2004 Hitachi Zosen TFAP-10-18MKII

    2004 Hitachi Zosen TFAP-10-18MKII

    • Manufacturer: Hitachi Zosen Corporation

    Fully automatic compression type 1000mm x 18 chambers Unmaintained, but in fairly good condition Complete books and control panel available Filtration area: 26.6 m2 Filtration volume: 306 L

    Hiroshima, Japan
  • 2011 Japan H-Classifier PFM-8C

    2011 Japan H-Classifier PFM-8C

    • Manufacturer: Japan Filter

    Filter plate: 800 square x 8 chambers Total filtration area: approx. 8 m2 Total filtration volume: approx. 160 L Cake thickness: 25mm Huffing pressure: 0.4MPa Squeeze pressure: 0.5MPa

    Hiroshima, Japan
  • Hosokawa Micron P-30 AA

    Hosokawa Micron P-30 AA

    • Manufacturer: Hosokawa Micron

    Specifications: Filtration area: 13 m2 Remarks: Both SS and SUS retainers can be ordered.

    Hiroshima, Japan
  • 1990 Hosokawa Micron CP-78-8

    1990 Hosokawa Micron CP-78-8

    • Manufacturer: Hosokawa Micron

    Specifications: Filtration area: 67.4 m2 With scraper at the bottom Remarks: No retainer

    Hiroshima, Japan
  • [Tokyo Engineering] Filter Press TFAP7-14

    [Tokyo Engineering] Filter Press TFAP7-14

    • Manufacturer: Tokyo Engineering

    750mm square x 7 chambers (double) Filtration area: Approx. 6m2 (estimated) Accessories: Hydraulic unit

    Hiroshima, Japan
123

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.