Processing » Manitoba

Building Filters

22

Used dragas in Manitoba, Canada

Trusted Seller
Used Atlas Copco GA110VSD Compressor Package
- Manufacturer: Atlas-Copco
- Model: GA 110
Complete package including but not limited to: -Atlas Copco GA110VSD 150 HP compressor (460 volt) -Atlas Copco FD310 refrigerated air dryer -Atlas Copco CD55 dessicant air dryer -Atlas Copco carbon tower -Ai...
Winnipeg, Canada
Trusted Seller
Em-Pro Manual Initial Pinch (Slip) Rollers
- Manufacturer: Em-Pro
Em-Pro Manual Initial Pinch (Slip) Rollers with rolling length ranging from 2FT to 4FT and rolling capacity from 22GA to 16GA. All rolls are made of polished, turned and ground high grade carbon steel Gear driven...
Winnipeg, Canada
Trusted Seller
Em-Pro Power Initial Pinch (Slip) Rollers
- Manufacturer: Em-Pro
Em-Pro Power Initial Pinch (Slip) Rollers with rolling length ranging from 2FT to 4FT and rolling capacity from 22GA to 16GA. All rolls are made of polished, turned and ground high grade carbon steel Gear driven ...
Winnipeg, Canada
Trusted Seller
Em-Pro Hydraulic Initial Pinch (Slip) Plate Bending Rollers
- Manufacturer: Em-Pro
Em-Pro Hydraulic Initial Pinch (Slip) Plate Bending Rollers with roll length ranging from 4FT to 8FT and rolling capacity from 5/32" to 1/4". Three rolls are driven by hydraulic power Pinch roll cylinders are adj...
Winnipeg, Canada
Trusted Seller
Em-Pro EMT-7R with Manual Top Crank
- Manufacturer: Em-Pro
Rotary Machine (Includes ONE SET – 3/8″ Single Bead Rolls) Throat Depth varies from 4-1/8” to 9-1/8”. Standard manual hand operated top shaft control with forward/reverse foot pedal. Packages available with servo...
Winnipeg, Canada
Trusted Seller
Em-Pro EMT-7R with Servo Top Shaft Control
- Manufacturer: Em-Pro
Power Rotary Machine This EMT-7R is equipped with the servo-electric top shaft control. The servo-electric top shaft allows for precise depth stop positioning using a teach function. (Includes ONE SET – 3/8″ Sin...
Winnipeg, Canada
Trusted Seller
Em-Pro EMT-7R with HMI Touch Control
- Manufacturer: Em-Pro
Power Rotary Machine This EMT-7R is fully equipped with the servo-electric top shaft control, paired with our HMI touchscreen that enables you to create and save a library of profiles to easily switch between the...
Winnipeg, Canada
Trusted Seller
Spiral-Helix Roval-Roller 48/20
- Manufacturer: Spiral-Helix
It reproduces round and flat-oval segments and reducers as well as many other forms common to the sheet-metal industry. The Spiral-Helix Roval-Roller produces round and flat-oval segments and reducers as well as ...
Winnipeg, Canada
Trusted Seller
Flagler Hybrid Cleat Bender
- Manufacturer: Flagler
The Flagler cleatfolder machines are controlled via a micro PLC. They are an open throat design with a maximum capacity of 20GA and 30" or 36" bending length. Micro PLC Controlled Open Throat Design Large Feed & ...
Winnipeg, Canada
Trusted Seller
Em-Pro 516
- Manufacturer: Em-Pro
Em-Pro General 5FT 16GA Duct Beader Em-Pro General Duct Beaders Features Eliminates crossbraking Stiffen ductwork in seconds Increase production Improve quality 32” deep entrance table – supports material for eas...
Winnipeg, Canada
Trusted Seller
Used Bepex PCX Dispersion Dryer Package
- Manufacturer: Bepex
Removal cost to be submitted to buyer upon request. PCX System Virgin Feed Rate: 6,810 kg/hr at 65% Moisture PCX System Dried Product Rate: 2,650 kg/hr at 10% Moisture Used on pea starch and/or canola meal. S...
Winnipeg, Canada
Trusted Seller
Spiral-Helix Fittingshaper 1250
- Manufacturer: Spiral-Helix
Spiral-Helix Fittingshaper 1250, The patented machine designed to form the grooves for a rubber gasket, a stop bead, as well as clamping the gasket on the ends of fittings. The Fittingshaper consists of a rigid f...
Winnipeg, Canada
Trusted Seller
Used GEA Westfalia Decanter Centrifuge, Model CC 458-21-32
- Manufacturer: GEA
- Model: CC 458-21-32
Manufacturer: GEA Westfalia Model: CC 458-21-32 Year of manufacture: 2008 Serial no. 8005-355 Gastight clarifying decanter for clarification / dewatering service With crated spare bowl With control panel P...
Winnipeg, Canada
Trusted Seller
ENGINEERED AIR HE321/O
- Manufacturer: ENGINEERED AIR
THIS IS AN ENGINEERED AIR HE321/O DIRECT FIRED HEATER DESIGNED FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS. IT OPERATES ON NATURAL GAS AND PROVIDES AN AIR CAPACITY OF 32000 CFM, WHICH FALLS WITHIN THE HE SERIES RA...
$23,500 USD
Get financing
Est. $442/mo
Brandon, Canada
Trusted Seller
Used Mariott Walker - Model 10.5T-1-C-BH Spray Dryer
- Manufacturer: Walker
Model 10.5T-1-C-BH Marriott Walker direct gas heated spray drier CAPACITY of the DRIER The water evaporating capacity of the drier will vary with inlet and outlet air temperatures and the process airflow rate, ...
Winnipeg, Canada

12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.