Processing » Mexico

Search By Category

Search By Manufacturer

Search By State

Building Filters

2062

Used Processing in Mexico

  • 2018 NORAMEX 3 roll 18x54

    2018 NORAMEX 3 roll 18x54 calander

    • Manufacturer: NORAMEX

    3 roll 18x54 calender with adjustable rolls. Unitized base grease lubrication 2 hp 25:1ratio adjustment motors hydraulic zero clearance system. preheating drums Variable speed Rebuilt motor more info upon...

    Leon, Mexico
  • Rubber batchoff

    Rubber batchoff

    • Manufacturer: NORAMEX

    Batch Off Type: Cantilever Overall Dimensions: Bar Width: (25”) 635 mm for two strips of 200 mm wide e/o Length: 12 meters Height : 1.8 meters approx.. Description and performance: Includes feeding conveyor...

    Leon, Mexico
  • Trusted Seller
    1993 Gea Westfalia 01-776

    1993 Gea Westfalia 01-776

    • Manufacturer: GEA

    Used Westfalia RSB?150-01-776 Disc Stack Centrifuge, Self-Cleaning, Automatic Solids Discharge Westfalia disc stack centrifuge, model RSB?150-01-776. Stainless steel product-contact parts. Max bowl speed: 4700RPM...

    Mexico
  • Trusted Seller
    Pulvex model 200 carbon steel

    Pulvex model 200 carbon steel hammer mill

    • Manufacturer: PULVEX

    Pulvex model 200 carbon steel hammer mill -Stainless stell hopper -7” diameter x 2 ½” deep grinding chamber -Fixed hammer -Mounted on base with casters -5 HP, 3 Phase, 60 HZ, 220-440 volt motor

    Mexico
  • Trusted Seller
    Advent model 310 semi-automatic pressure

    Advent model 310 semi-automatic pressure sensitive wraparound labeler

    • Manufacturer: Advent Instruments

    Advent model 310 semi-automatic pressure sensitive wraparound labeler - Up to 35 containers/minute - Containers are hand fed, and ejected automatically - No change parts for different sized containers - Hot stamp...

    Mexico
  • Trusted Seller
    Quadrel 36" Stainless Steel Accumulating

    Quadrel 36" Stainless Steel Accumulating Table

    • Manufacturer: QUADREL

    Quadrel 24" Stainless Steel Accumulating Table

    Mexico
  • Trusted Seller
    52" (1330mm) WIDE TECMO ELFLEX

    52" (1330mm) WIDE TECMO ELFLEX 1400 VA7 LAMINATION & COATING LINE - ALUMINUM FOIL, PAPER & FILM

    • Manufacturer: TECMO

    52" (1330mm) Wide Tecmo Lamination & Coating Line Manufacturer : TECMO Italy Model : Elflex 1400 VA 7 Technical Specifications Width min max: 24" - 52" (600-1330 mm) Thickness min max : 0.009mm - 0.110 mm C...

    Mexico
  • Trusted Seller
    Dibago model DBB-4X Strip Packager

    Dibago model DBB-4X Strip Packager - Vibratory

    • Manufacturer: DIBAGO

    Dibago model DBB-4X Strip Packager - Vibratory tablet feeder - 2 packages across - Horizontal and vertical cut - 1/4 HP, 1 Phase, 60 Cycles, 110 volts motor.

    Mexico
  • Trusted Seller
    Littleford model FM-50 50 liter

    Littleford model FM-50 50 liter plow mixer

    • Manufacturer: Littleford

    Littleford model FM-50 50 liter plow mixer - Stainless steel - 1.8 Cu Ft - 1 chopper - Main motor: 3 HP, 3 phase, 60 cycles, 220 volts - Chopper motor: 3 HP, 3 phase, 60 cycles, 220 volts - Serial # 40289-2752

    Mexico
  • Trusted Seller
    66" long x 4" dia.

    66" long x 4" dia. screw conveyor

    • Manufacturer: NO NAME

    66" long x 4" dia. screw conveyor - Stainless steel - 24" dia x 18" deep hopper - 3 phase, 60 cycles, 250/440 volts

    Mexico
  • Trusted Seller
    Stainless steel 107 gallon tank

    Stainless steel 107 gallon tank

    • Manufacturer: NO NAME

    Stainless steel 107 gallon tank -34" diameter x 27" deep -Agitator with propeller -3” bottom center discharge -Mounted on legs -3 HP, 3 Phase, 60 Hz, 220 – 440 volt motor

    Mexico
  • Trusted Seller
    Patterson Kelley 75 Cu Ft

    Patterson Kelley 75 Cu Ft stainless steel V blender

    • Manufacturer: Patterson-Kelley

    Patterson Kelley 75 Cu Ft stainless steel V blender Maximum bulk density: 65 lbs/Cu Ft - (2) 15" diameter feed ports - 6.5" diameter discharge - Serial #C133470

    Mexico
  • Trusted Seller
    Lightnin' model XJA33 pneumatic propeller

    Lightnin' model XJA33 pneumatic propeller agitator

    • Manufacturer: Lightnin

    Lightnin' model XJA33 pneumatic propeller agitator, without shaft - Serial #2632100

    Mexico
  • Trusted Seller
    Patterson Kelley 10 Cu Ft

    Patterson Kelley 10 Cu Ft stainless steel V Blender

    • Manufacturer: Patterson-Kelley

    Patterson Kelley 10 Cu Ft stainless steel V Blender - Plexiglass guards - Explosion proof controls - Provisions for intensifier bar (no bar) Maximum bulk density: 70 lbs/Cu Ft, (2) 17" diameter feed ports, 8" dia...

    Mexico
  • Trusted Seller
    3M Matic model 19000 carton

    3M Matic model 19000 carton sealers & tapers

    • Manufacturer: 3M

    3M Matic model 19000 carton sealers & tapers -Top and bottom tape heads -Automatic adjustment for different box sizes -With 2 side feed belts -1/6 PH, 1 phase, 60 cycles, 110 volts motor -Serial no.1727

    Mexico
  • no-image_en.png

    Ingersoll Rand EP100 Industrial Compressor

    • Manufacturer: Ingersoll Rand
    • Model: EP100

    Good condition Ingersoll Rand EP100 Industrial Compressors manufactured in 2005. Located in USA and other countries. Click request price for more information.

    USA
3132333435

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.