Processing » Michigan

Search By Category

Search By Manufacturer

Building Filters

620

Used test in Michigan, USA

  • Trusted Seller
    Hammond Dual Head Buffing Jack

    Hammond Dual Head Buffing Jack V2153

    • Manufacturer: Hammond
    • Model: RITE SPEED

    Dual Head. One hand brake does not work. OAD: 26″L x 81″W x 50″H. Hammond Dual Head Buffing Jack V2153

    $1,500 USD
    Sparta, MI
  • Trusted Seller
    Met Pro 1500 CFM 8″

    Met Pro 1500 CFM 8″ Mist Miser FS2113

    • Manufacturer: Met-Pro

    Met Pro 1500 CFM 8″ Mist Miser FS2113 Weight: 150 lbs | Cfm: 1500 | Material: CPVC | Tested by: RJ | Oad: 38"Lx 36"W x 54"H

    $950 USD
    Sparta, MI
  • Trusted Seller
    Met Pro 3500 CFM 14″

    Met Pro 3500 CFM 14″ Mist Miser FS2120

    • Manufacturer: Met-Pro

    Sold As-Is Inlet: 14″. Outlet: 14″. Comes with damper. Mist misers are designed to remove chrome and nickel near the tanks to avoid the collection of particles in your duct work. Met Pro 3500 CFM 14″ Mist Mise...

    $1,200 USD
    Sparta, MI
  • Trusted Seller
    Met Pro 3500 CFM 14″

    Met Pro 3500 CFM 14″ Mist Miser FS2119

    • Manufacturer: Met-Pro

    Sold As-Is. Inlet: 14″. Outlet: 14″. Comes with damper. Mist misers are designed to remove chrome and nickel near the tanks to avoid the collection of particles in your duct work. Met Pro 3500 CFM 14″ Mist Mis...

    $1,200 USD
    Sparta, MI
  • Trusted Seller
    Met Pro 3500 CFM 14″

    Met Pro 3500 CFM 14″ Mist Miser FS2114

    • Manufacturer: Met-Pro

    Sold As-Is Inlet: 14″ Outlet: 14″. SP: .25-1.75. GPM: 1.4 – 2.8. Mist misers are designed to remove chrome and nickel near the tanks to avoid the collection of particles in your duct work. Met Pro 3500 CF...

    $1,200 USD
    Sparta, MI
  • Trusted Seller
    Met Pro 2500 CFM 12″

    Met Pro 2500 CFM 12″ Mist Miser FS2117

    • Manufacturer: Met-Pro

    Sold As-Is. Inlet: 12″ Outlet: 12″. SP: 1.1-2.2. With damper. Mist misers are designed to remove chrome and nickel near the tanks to avoid the collection of particles in your duct work. Met Pro 2500 CFM 12″ ...

    $1,000 USD
    Sparta, MI
  • Trusted Seller
    Met Pro 2500 CFM 12″

    Met Pro 2500 CFM 12″ Mist Miser FS2116

    • Manufacturer: Met-Pro

    Sold As-Is Inlet: 12″ Outlet: 12″. SP: 1.1-2.2. With damper. Mist misers are designed to remove chrome and nickel near the tanks to avoid the collection of particles in your duct work. Met Pro 2500 CFM 12″ M...

    $1,000 USD
    Sparta, MI
  • Trusted Seller
    Met Pro 2500 CFM 12″

    Met Pro 2500 CFM 12″ Mist Miser FS2111

    • Manufacturer: Met-Pro

    Sold As-Is. Inlet: 12″ Outlet: 12″. With damper. Mist misers are designed to remove chrome and nickel near the tanks to avoid the collection of particles in your duct work. Met Pro 2500 CFM 12″ Mist Miser FS2111

    $1,000 USD
    Sparta, MI
  • Trusted Seller
    Shelco 20,160 GPH MS40 Cartridge

    Shelco 20,160 GPH MS40 Cartridge Filter F2610

    • Manufacturer: Shelco
    • Model: 12FOS4-316-3F-B

    316 Stainless steel Maximum operating pressure: 150 PSI at 300° F. Inlet: 3″. Outlet: 3″. Shelco 20,160 GPH MS40 Cartridge Filter F2610

    $3,650 USD
    Sparta, MI
  • Trusted Seller
    Atotech 18″ x 18″ Spin

    Atotech 18″ x 18″ Spin Dryer SD2975

    • Manufacturer: Atotech

    Start/Stop. Atotech 18″ x 18″ Spin Dryer SD2975 Weight: 1700 lbs | Tested by: TL | Basket size: 18" x 18" | Heat: Steam | Volts: 240 | Phase: 3 | Max-load: 110

    $11,900 USD

    Get financing

    Est. $234/mo

    Sparta, MI
  • Trusted Seller
    Mix Mor 3 HP Mixer

    Mix Mor 3 HP Mixer MX2778

    • Manufacturer: MixMor

    Mix Mor 3 HP Mixer MX2778 Weight: 150 lbs | Tested by: RV | Hp: 3 | Rpm: 1750 | Shaft length: 1.50" | Clamp: Bolt On | Volts: 208-240/460

    $1,550 USD
    Sparta, MI
  • Trusted Seller
    Lightnin .75 HP Mixer MX2782

    Lightnin .75 HP Mixer MX2782

    • Manufacturer: Lightnin

    No Shaft. Lightnin .75 HP Mixer MX2782 Weight: 25 lbs | Tested by: RJ | Hp: 0.75 | Shaft length: .75" | Drive: Gear | Clamp: Bolt On | Volts: 208-230/460

    $950 USD
    Sparta, MI
  • Trusted Seller
    Met Pro 3500 CFM 14″

    Met Pro 3500 CFM 14″ Mist Miser FS2122

    • Manufacturer: Met-Pro

    Sold As-Is. Inlet: 14″. Outlet: 14″. Comes with damper. Mist misers are designed to remove chrome and nickel near the tanks to avoid the collection of particles in your duct work. Met Pro 3500 CFM 14″ Mist Mise...

    $1,200 USD
    Sparta, MI
  • Trusted Seller
    Met Pro 3500 CFM 14″

    Met Pro 3500 CFM 14″ Mist Miser FS2121

    • Manufacturer: Met-Pro

    Sold As-Is. Inlet: 14″. Outlet: 14″. Comes with damper. Mist misers are designed to remove chrome and nickel near the tanks to avoid the collection of particles in your duct work. Met Pro 3500 CFM 14″ Mist Mi...

    $1,200 USD
    Sparta, MI
  • Trusted Seller
    Met Pro 2500 CFM 12″

    Met Pro 2500 CFM 12″ Mist Miser FS2115

    • Manufacturer: Met-Pro

    Sold As-Is Inlet: 12″ Outlet: 12″. SP: 1.1-2.2. With damper. Mist misers are designed to remove chrome and nickel near the tanks to avoid the collection of particles in your duct work. Met Pro 2500 CFM 12″ M...

    $1,000 USD
    Sparta, MI
89101112

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.