Building Filters
- Trusted Seller
Haviland 30 GPM Cone Bottom Clarifier CL2153
- Manufacturer: Haviland
Steel Construction. Interior has been sand-blasted and painted with 2-part epoxy. Built-in Floc Tank. 2″ Drain Bottom of Cone. Haviland 30 GPM Cone Bottom Clarifier CL2153
- Trusted Seller
3 Station Manual Plating Line PL2196
Poly-Pro Construction. 3 Station Manual Line $8.500 or $3,000 per Tank. 2″ Drains at bottom. 4 Support bands on each tank. Each tank is 1,420 lbs each. 3 Station Manual Plating Line PL2196
- Trusted Seller
Vertical Double Wall Dish Bottom 304 Stainless Steel Mix Tank, 1,250 Gallon
- Manufacturer: Stainless Fabrication, Incorporated.
Vertical Double Wall Dish Bottom 304 Stainless Steel Mix Tank, 1,250 Gallon
Hudsonville, MI 
60 GALLON, OVERHEAD TANK, BLANCHARD PLATE, DRIP PAN
- Manufacturer: Blanchard
OVERHEAD TANK: 42” L X 32” W X 14” TALL. BOTTOM NPT SUCTION PORTS: FOUR 1.5” (TWO WITH 1.5” BALL VLVES); THREE .50”. TOP NPT RETURN PORTS: TWO 2”; TWO 1”; FOUR .50”. TWO 1.5” TOP RETURN FILTERS. TWO SHOCK MOUNTED...
Grand Rapids, MI
100 GALLON TANK, SINGLE & DBL. STACK, BLANCHARD PLATE
- Manufacturer: Blanchard
DOUBLE STACK UNIT. TWO SHOCK MOUNTED BLANCHARD PLATES: ONE 14” X 45” X 1”, ONE 27” X 63” X 1. SIX 1.5” SUCTION PORTS WITH BALL VALVES. SIX 3/8”NPT BOTTOM PORTS. TWO 2”, TEN 3/8”, FOUR .75” NPT TOP RETURN PORTS. T...
Grand Rapids, MI
100 GALLON TANK, SINGLE & DBL. STACK, BLANCHARD PLATE
- Manufacturer: Blanchard
DOUBLE STACK UNIT. TWO SHOCK MOUNTED BLANCHARD PLATES: ONE 14” X 15” X 1”, ONE 27” X 63” X 1. SIX 1.5” SUCTION PORTS WITH BALL VALVES. SIX 3/8”NPT BOTTOM PORTS. FOUR .75”, TWO 2”, TEN 3/8” NPT TOP RETURN PORTS. T...
Grand Rapids, MI
60 GALLON, OVERHEAD TANK, BLANCHARD PLATE, DRIP PAN
- Manufacturer: Blanchard
ONE 2” NPT SUCTION PORT WITH BALL VALVE. TWO .75”AND ONE .5” BOTTOM PORTS. ONE 1.5”, TWO 1.25”, ONE .75” AND ONE .5” NPT TOP PORTS. SHOCK MOUNTED RAILS WITH TWO 10HP, 1200 RPM, 460 VOLT C-FACE MOTORS WITH C-FACE ...
Grand Rapids, MI- Trusted Seller
8 Station Phosphate Barrel Line PL2193
Includes tanks, barrels and superstructure. Stainless steel tanks with drains on bottom. (4) Air Driven Stainless Steel Barrels with 1/8″ Perfs: 14″D x 30″ L (1) Air Driven Poly Barrel with 1/16″ Perfs: 16″D x 30...
- Trusted Seller
1745 Gallon Steel Rectangular Settling Tank RT2261
Motorized Auger at Bottom with .25 HP Motor. Used as a Monroe Environmental 60 GPM Clarifier. No Plates Included. 3″ Inlet at Top. 2″ Outlet at Bottom. 110 Volt Motor. OAD: 136″L x 55″W x 96″H. 1745 Gallon ...
12 GALLON TANK (ONE 23 GALLON), FILLER/BREATHER
FIVE 1” NPT PORTS (TWO ON EACH END; ONE ON BOTTOM); ONE ½” NPT PORT ON TOP. FILLER/BREATHER. FULL LENGTH SITE-GLASS. 9” X 7” CLEAN OUT PLATE. FLANGE MOUNT ON BACK. TANK SIZE IS 15” X 21” X 10”. (ONE TANK IS 20” X...
Grand Rapids, MI
1989 SCHWABE SR-150
- Manufacturer: Herman-Schwabe
- Model: SR-150
STANDARD CATALOG SPECIFICATIONS HERMAN SCHWABE HYD. DIE CUTTING PRESS MODEL SR-150 1989 150 TON CAPACITY 8" STROKE 36.25" X 79" RAM AREA 36" X 83" BED AREA 89.5" BETWEEN HOUSINGS 32" FROM FLOOR TO TOP OF BED 3 PL...
Detroit, MI- Trusted Seller
8 Cu Ft. Vibe Tech Cob Dryer
Net Before Ship CAPACITY-8-1/2 Cubic Foot CONSTRUCTION -3/16″ Outer Wall, 1/4″ Center Wall, 1/2″ Top and Bottom Bearing Mounting Plate BOWL WIDTH – 52″ MACHINE HEIGHT – 42″ PROCESS CHANNEL WIDTH – 13″ UNLOAD HEIG...
Michigan, USA 
1981 Compression Molding 80661
Capacity: 220 Ton @ 1700 PSI Max. stroke: approx. 18"-24" Max. daylight to bed: 48" (43-1/2" between bolsters) Overall bed & ram area: 58" RL x 36" FB (3-1/2" hole in bed) Distance between posts: 42" rL x 21...
Troy, MI- Trusted Seller
10 Cu Ft. Vibe Tech Heated Cob Dryer
Net Before Ship CAPACITY-10 Cubic Foot CONSTRUCTION -1/4″ Outer Wall, 3/8″ Center Wall, 1″ Top and Bottom Bearing Mounting Plate BOWL WIDTH -55″ MACHINE HEIGHT -44″ PROCESS CHANNEL WIDTH -15-1/2″ UNLOAD HEIGHT -3...
Michigan, USA
