Building Filters
Surface Combustion “3 Bottle” 9,000 CFH Endothermic Generator
- Manufacturer: Surface Combustion
Manufactured by Surface Combustion this is a Model RX-3T-ABCP unit, Serial number AC-43425-1; - 3 Bottle Unit, 9,000 CFH Total Capacity - Natural Gas Fired - 480Volt - Air Cooled - Total Weight 17,000 pounds, Foo...
Surface Combustion “Standard Allcase Line”
- Manufacturer: Surface Combustion
Manfuacturered by Surface Combustion of Maumee, Ohio this is a “Standard” Allcase line consisting of the batch IQ, temper furnace and Spray Washer. - Model; Standard Allcase, Draw Furnace; HFC-30-42-24, Batch Wa...
Mesh Belt Austemper Line Available-330 Pounds/Hour
- Manufacturer: AFC
Manufactured by AFC-Holcroft at their MATTSA licensed facility this is a gas fired mesh belt austemper line with a capacity of 150kg/hour (330 pounds per hour). This a complete line with automated loading system,...
Two Drever Lift-Off Atmosphere Furnaces
- Manufacturer: Drever
Natural gas-fired—26 U-shaped radiant tubes, ceramic fiber-lined, 1650°F max, 4 roof-mounted alloy recirculating fans, atmosphere capable, “knife edge” seal with gaskets, hydraulic lift mechanism on each end of f...
Atmosphere Box Furnace, 1850F, 30" x 48" x 30"
- Manufacturer: Lindberg
Specifications Brick Lined New top-mounted circulation fan Coretherm heating elements Alloy hearth plate Walker flowmeters for Endo, natural gas, air Flame curtain, front door Pneumatic front door Burnoff flare 2...
AFC 500 Lbs/Hr Mesh Belt Furnace Line
AFC 500lb/hr, Natural Gas fired Continuous Belt Furnace Line. Currently configured in a straight line, sits on level floor with no pits. Includes Loading system, prewash, hardener, quench system, post wash, tempe...
Pelican Rapids, MN
Surface Combustion 36″ X 72″ Allcase Batch IQ Furnace
- Manufacturer: Surface Combustion
Manufactured by “Surface Combustion” of Maumee, Ohio, USA this is an “Allcase” furnace with working dimensions of 36″ X 72″ X 36″. - New in 1998 - Gas Fired - Currently installed but not in operation. Furnace was...
Ipsen Sealed Quench Furnace TQ2 EM (LOCATED IN THE UK)
- Manufacturer: Ipsen
- Model: TQ
Manufactured by Ipsen this is a sealed quench furnace, Model TQ2 EM with a work zone size of 450 mm (wide) X 610 mm (long) X 350 mm (high) and a hearth capacity of 180 kg - Electrically heated, total connected lo...
Surface Combustion Batch IQ-36X48X36
- Manufacturer: Surface Combustion
Built by Surface Combustion this is a “Super 36” model, serial number BC-44455-01; - Working Dimensions of 36″ X 48″ X 36″ - Natural Gas fired, maximum operating temperature of 1850F - 480Volt - PLC Controls - In...
Surface Combustion Batch IQ-36X48X36 With FNC
- Manufacturer: Surface Combustion
Built by Surface Combustion this is a “Super 36” model, serial number BC-44445-01; - Working Dimensions of 36″ X 48″ X 36″ - Natural Gas fired, maximum operating temperature of 1800F - 480Volt - PLC Controls - In...
2012 Mack Pinnacle CXU613
- Manufacturer: Mack
- Model: PINNACLE CXU613
2012 Mack CXU613 DPF System, Engine Make: Mack, Engine Model: MP8
Winger, MN
AFC Batch IQ Furnace, 36″ X 48″ X 36″
- Manufacturer: AFC
In/Out Integral Quench Furnace w/Dual Quench Cylinders, Roof Fan, six (6) Vertical Radiant Tubes w/Recuperators, Rear Handler, Oil Filtration System, 3500 pound load capacity. Furnace: 11’6″W x 12’2″H x 14’L (28,...
Nash 2BE 1253-OBY2-Z Vacuum Pumps
- Manufacturer: Nash
NashSiemensElmoModel2BE1253-OBY2-Z 1000-2000CFM 4PumpsAvailable 2BE1SmallSeries SuctionCapacity: 60 to1,800ACFM(100to3,100m 3 /h) VacuumRange: to1inHgA(to33mbarabs.) DischargePressureRange: 50psia(3.5barsabs) Dif...
Minneapolis, MN
Surface Rebuilt 36 X 72 Batch IQ
- Manufacturer: Surface Combustion
Built by “Surface Combustion” of Maumee, Ohio this is an “Allcase” model, gas fired, batch IQ furnace with working dimensions of 36″ X 72″ X 36″. This furnace is currently being rebuilt and when completed will co...
Can Eng 3500 Pound/Hour Mesh Belt Line
- Manufacturer: CAN-ENG
Manufactured by Can Eng of Niagara Falls, Canada this is a gas fired mesh belt furnace line with a rated capacity of 3500 pounds per hour. Manufactured in 2002. - Belt Width 48” - High heat furnace is capable of ...
