Processing » New Jersey

Search By Category

Search By Manufacturer

Building Filters

853

Used frames in New Jersey, USA

  • Trusted Seller
    Westinghouse HS

    Westinghouse HS

    • Manufacturer: Westinghouse

    Used Westinghouse 500 HP AC Induction motor, 2300 volts, 710 RPM, Type HS, SF 1.15, WP1 enclosure, Frame H6808L, Model HS, S/N 2-17S9145.

    Hainesport, NJ
  • Trusted Seller
    Centrifuge-. & Hydraulic 1.49 kW

    Centrifuge-. & Hydraulic 1.49 kW (2 HP) Stainless Steel 316 - IPP# 109855

    • Manufacturer: Sharples

    Super Centrifuge tubular clarifier bowl Frame Model #MV88-16/7/38YY1JYLB Equipped with vertically mounted 2 HP, 3570 rpm, 3/60/230 volt motor. Requires clarifier tubular bowl.

    Princeton Junction, NJ
  • Trusted Seller
    Centrifuge Inverting Filter Heinkel HF800.1

    Centrifuge Inverting Filter Heinkel HF800.1 Hastelloy C22 - IPP# 241094

    • Manufacturer: Heinkel

    Internal Rated 0.7 PSI @ 170 degrees F Electromechanical drive system 42" x 12' 6" frame, axial motor 4080 mm long x 2065 mm wide x 1900 mm high 6200 kg.

    Princeton Junction, NJ
  • Trusted Seller
    MARATHON DA-365TSTGS4001DV-W

    MARATHON DA-365TSTGS4001DV-W

    • Manufacturer: Marathon
    • Model: DA-365TSTGS4001DV-W

    Used 75 HP Marathon motor. New 2006. Model DA-365TSTGS4001DV-W, Serial #WWA020010, frame 365ts, 3 phase, 75 HP @ 230/460 60 HZ, 60 HP @190/380 50 HZ .

    Hainesport, NJ
  • Trusted Seller
    Ertel 12" Filter Press 2

    Ertel 12" Filter Press 2 Hsb4 #15024

    • Manufacturer: Ertel 12" Filter Press

    12" diameter round 304 stainless steel filter press by ertel engineering, model 2 h sb4, serial # 62-304 ss. Features all stainless steel contact surfaces, 12" diameter round frames and screended plates, five tot...

    Marlboro, NJ
  • Trusted Seller
    CHERRY BURRELL 6SSHE

    CHERRY BURRELL 6SSHE

    • Manufacturer: Cherry Burrell
    • Model: 6SSHE

    (2) used Cherry Burrell Scraped Surface Heat Exchangers/Votator/Contherm. 9 Sq.Ft. Horizontal 6" X 72", 15 HP. Units mounted on one Stainless Steel frame. Jacket Rated 150 PSI @ 375 Deg.F. MDMT -20 @ 150 PSI. She...

    Oldmans Township, NJ
  • Trusted Seller
    US Motors 741V0V26 Gear Reducer

    US Motors 741V0V26 Gear Reducer - IPP# 206257

    • Manufacturer: U.S. Motors

    Vari-Drive Minimum output 4 RPM With 2HP, 3/60/230V motor for use in Hazardous locations (Class 1 Div. 2 Group D, F & G), Syncro gear module frame 21, type CMP

    Princeton Junction, NJ
  • Trusted Seller
    Stainless Steel 304 Bird 36

    Stainless Steel 304 Bird 36 Centrifuge-Screen Bowl - IPP# 201474

    • Manufacturer: Bird

    contour screen bowl centrifuge Main drive is a Reliance 444T frame TEFC motor 200 hp, 3/60/460 volt oil system driven by a Reliance 143T TECF 1 hp 3/60/460 volt motor

    Princeton Junction, NJ
  • Trusted Seller
    BISON 1,000 Litre

    BISON 1,000 Litre

    • Manufacturer: Bison

    Used Bison approximately 1,000 litre plastic IBC powder container. Approximately 1050mm x 1050mm x 500mm x 1100mm cone. Unit is mounted in a mild steel frame with forklift base.

    Hainesport, NJ
  • Trusted Seller
    2015 ALFA LAVAL M6-MFG

    2015 ALFA LAVAL M6-MFG

    • Manufacturer: Alfa-Laval
    • Model: M6

    Used 30 square foot vertical plate heat exchanger. Manufactured by Alfa Laval Model M6-MFG EPDMP clip-on plate exchanger gaskets 316 stainless steel plates Carbon steel frame 150 psi/full vacuum @ 300°F Built 2015

    Hainesport, NJ
  • Trusted Seller
    Centrifuge-Disc Bowl 11.2 kW (15

    Centrifuge-Disc Bowl 11.2 kW (15 HP) - IPP# 96372

    • Manufacturer: Westfalia

    disc bowl Clarifier (2-phase) centrifuge with paring disc discharge of liquid phase Rising channels on outside edge of disc's (Scalloped disc's) Frame assembly serial #1624-930. Bowl assembly serial #16290-520 22...

    Princeton Junction, NJ
  • Trusted Seller
    GEA 25 Litre

    GEA 25 Litre

    • Manufacturer: GEA

    Used GEA Gallay 25 litre capacity stainless steel pots. Unit measures approximately 400mm diameter X 150mm straight side with a 400mm cone. Bottom outlet 100mm. Mounted on a frame with 4 wheels.

    Hainesport, NJ
  • Trusted Seller
    76 CUBIC FOOT

    76 CUBIC FOOT

    • Manufacturer: STAINLESS STEEL RIBBON BLENDER

    Used Approximately 76 Cubic Foot Stainless Steel Ribbon Blender Capacity: 76 cubic feet (45 cubic feet working capacity) Driven by a 20 hp motor 7" x 7" center bottom discharge Mounted on mild steel frame

    Hainesport, NJ
  • Trusted Seller
    TOTE, INC. 12 Cubic Foot

    TOTE, INC. 12 Cubic Foot

    • Manufacturer: TOTE, INC.

    Used Tote Inc. approximately 90 gallon stainless steel tote. 36" X 30" X 13" straight side with a 25" cone and 10" discharge. Mounted on stackable fork lift access frame. 18" top-mounted manway.

    Hainesport, NJ
  • Trusted Seller
    TOTE, INC. 12 Cubic Foot

    TOTE, INC. 12 Cubic Foot

    • Manufacturer: TOTE, INC.

    Used Tote Inc. approximately 90 gallon stainless steel tote. 36" X 30" X 13" straight side with a 25" cone and 10" discharge. Mounted on stackable fork lift access frame. 18" top-mounted manway.

    Hainesport, NJ
2526272829

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.