Used frames in New Jersey, USA

Stainless Steel 316L Alfa Laval BTPX 205SGD-34CDP Centrifuge-Disc Bowl - IPP# 239356

• Manufacturer: Alfa-Laval

Pharma grade GMP sanitary construction Designed for Biotech cell harvesting Rated 5 gpm on Pharma broth with a Broom Motors LTD Also includes a 1 m2 plate and frame heat exchanger manufactured by Sondex, rated fo...

20 cu ft patterson-kelley stainless steel v-blender

• Manufacturer: Patterson-Kelley

Used 20 Cu Ft Stainless Steel Jacketed V-blender. Manufactured by Patterson-Kelley. Jacket rated 30PSI@250F. Equipped for intensifier bar (not included). Stainless Steel Frame mounted. Serial #270119. National Bo...

45 GALLON

• Manufacturer: STAINLESS STEEL JACKETED MIX TANK

Used Approximately 45 Gallon Stainless Steel Jacketed Mix Tank Capacity: 45 gallons Dimensions: 24" dia. x 24" straight side Top-mounted agitator driven by a 0.75 hp motor, 460 volt Dish top, dish bottom Mounted ...

Alfa Laval M10-BFG

• Manufacturer: Alfa-Laval
• Model: M10-BFG

Used 105.78 Sq. Ft. (Cap 6.56 US gallons ) 316 Stainless Steel (Plates) Alfa Laval Plate and Frame Heat Exchanger, Type M10-BFG. 100 PSI at 300 F. Built 1992. Serial # 67814

105 gal precision stainless inc stainless steel reactor

• Manufacturer: Precision Stainless

Used 105 Gallon Stainless Steel Reactor. Mfg Precision Stainless. MAWP 60 PSIG/FV@320F. Jacket MAWP 100PSIG@320F. Bottom mounted agitator. Mounted on frame with casters. Serial#5289-13. National Board #3679. Buil...

100 gal stainless steel cop tank

S/S COP Tank, with Ampco 10 hp Centrifugal Pump, 3500 RPM Motor, Internal Dims.: Aprox. 134-1/2" L x 16" W x 11" H, with Spray Jet, Mounted on S/S Portable Frame (CP COP #13)

Separators Screener Stainless Steel 321 - IPP# 704144

• Manufacturer: William Boulton

single deck separator screen 6.6 sq ft (0.6 sq meter) per deck. with dust cover. Mounted on carbon steel frame, spring supported Openings: top inlet 2-5 1/2", 1-3 1/2"; straight side outlet 1-2 1/2"

Polypropylene Shriver Press Filter - IPP# 212892

• Manufacturer: Shriver

Polypropylene filter press Size 12 2 eye corner feed With (13) 2 button frames 9.5"ID x 8" ID x 1" thick. (14) plates - (8) are 1 button with nozzles, (7) are 3 button washing type. Manual closure, Portable design

64 sq ft tranter stainless steel plate heat exchanger

• Manufacturer: Tranter

Used 64.64 sq. ft, 316-SS plate heat exchanger. MFD by Tranter type UX-216-UJ-20, Serial # P23160H. Rated 150/150 psi @ 300 deg. F. Each end plate has 3-2" nozzles. Mounted on frame.

Alfa Laval A15-BFG

• Manufacturer: Alfa-Laval
• Model: A15-BFG

Used 4682 Sq.Ft. 316 Stainless Steel Alfa Laval plate and frame heat exchanger. 592 Stainless Steel plates. 6 inlet/outlet. Rated 150 psi @ 302 F. Model # A15-BFG. Built 1992. National Board # 6210 and 6211 (Qty ...

Bin 0.4 m3 (14.2 ft3) Stainless Steel 304 - IPP# 225307

• Manufacturer: K-Tron

agitated weigh feed hopper, clamped flat top, weld coned bottom, agitator driven by 1 HP, 3/50/230 volt, 1715 rpm motor via 195:1 ratio SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate t...

Delfield Under Counter #16726

• Manufacturer: Delfield

Delfield stainless steel under counter refrigerator with three doors, 115 volt/ 1 phase, cabinet mounted refrigeration compressor with temperature control, refrigerated chambers have internal lighting, mounted on...

Carbon Steel Water Treatment - IPP# 230714

• Manufacturer: US Filter

Sanitary, Reverse Osmosis system This is a Pharmaceutical and biotech grade machine single pass The system recovery rate is 75% with a membrane salt rejection rate of 99% nominal. Nine membranes are Filmtec RO390...

Vac U Max Tilt Table Tilt Table #9513

• Manufacturer: VAC-U-MAX

Vac-u-max tilt table, designed for pneumatically unloading drums while vibrating and tilted at approx 30 degree angle, maximum drum diameter is 24", mounted in frame with vibration dampering mounting feet.

Mueller Ac217 B-150

• Manufacturer: Mueller
• Model: AC217 B-150

Used Mueller Stainless Steel Plate & Frame Heat Exchanger. 5732 sq/ft of surface area. Rated for 150 psig at 190 F, minimum design metal temeperature of 32 F at 150 psig. 370 plates in total. Built in 2012.