Used frames in New Jersey, USA

Sani-matic Tank 125 Gallon #16692

• Manufacturer: Sani-Matic

125 gallon closed top insulated stainless steel sanitary tank by sani-matic, 30" diameter x 40" straight side, dish top and bottom, 18" top manway with domed, gasketed, hinged cover and 4 hinged mounted screw dow...

Work Platform 60 X 45 Inches Work Platform #13183

• Manufacturer: Work Platform 60 X 45 Inches

Sanitary enviorment work platform, 60" long x 45" wide x 7" high, raised polished aluminum diamond plate top with aluminum skirt and internal frame mounted on four threaded leveling feet. Formerly used in brande...

Bin 0.002 m3 (0.08 ft3) Stainless Steel 304 - IPP# 225310

• Manufacturer: K-Tron

clamped flat top, weld coned bottom agitator driven by 5 HP, 3/50/230 volt, 1750 rpm motor via SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, bottom outlet with a screw ...

Major Items Plastic Stainless Steel 304 - IPP# 225243

250-500kg/hr Maag hot melt gear pump viscosity at 10/sec 70 to 3000 Pas inlet pressure 10 bar, outlet pressure 250 bar, (4) heating cartridges (1250 Watt, 415 volt), driven by 18.5 kw, 3/50/60/380/420/480 volt, 1...

Dryer-Flaker Drum and Belt 1,200 mm (47.2 in) Stainless Steel - IPP# 203810

• Manufacturer: Correa

ZN stainless steel dosing system (tube needle system) can be heated, rated 100 to 200 KG/Hr. Unit has an endless belt Unit has an endless belt, 1.2 meter wide, 1mm thick,x 11.14 meter total length, 4 Meter workin...

Patterson-Kelley Not Applicable

• Manufacturer: Patterson-Kelley

Used Patterson Kelly Co. V-Blender/Twin Shell Dry Blender. Working capacity 3 cubic ft. (85 liter). Material of construction is stainless steel. Max 170 lbs/Cubi ft. product density, (1) Solid flow discharge valv...

Union Process 15S

• Manufacturer: Union
• Model: 15S

Used Union Process Batch Attritor. Model 15S. 5HP Reliance Motor to turn agitator: 575 Volt, 1695 RPM, Frame: 284T. Includes 2HP Diaphragm Pump Serial #587. Variety Steel Fabricators Pressure Vessel. Serial # 577...

15 hp szegvari attritor

• Manufacturer: Szegvari

Used 15HP Attritor. Approximate 80 Gallon capacity. Non-jacketed mixing vessel, approximate 28-1/2" diameter x 29-1/2" deep. Approximate 36" long shaft with (14) welded bars. Driven by a 15hp, 3/60/230/460 volt, ...

Netzsch Max Shear 3

• Manufacturer: Netzsch

Comprehensively tested, used Netzsch Max Shear 3 Inline disperser. Includes a stainless steel inline mixer with 76mm diameter slotted disintegrating head direct driven by 4 kW 3/50 2885rpm motor. Also includes do...

METALCRAFT 50"

• Manufacturer: METALCRAFT

Used custom Metalcraft tote tilt discharge station. Designed to empty powder tote bins. 50" wide tote cradle and aluminum hopper. 6" diameter X 6' long 304 stainless steel discharge screw driven by 1 HP, 3 phase,...

GOODMAN 3" Wide x 22" Long

• Manufacturer: GOODMAN

Used Goodman Solid Belt Puller – Approx. 3" (76 mm) Wide x 22" (559 mm) Long Solid belt design with an approximate belt width of 3 inches (76 mm) and length of 22 inches (559 mm). Frame includes a provision for i...

JOSHUA GREAVES 300 Litre

• Manufacturer: JOSHUA GREAVES

Used approximately 300 litre capcity stainless steel vertical mixing vessel. Unit has a top entry propeller agitator powered by a Joshua Greaves & Sons Ltd motor. Motor is 0.37kW operating at 1380rpm. Unit has a ...

ART PROZESS & LABORTECHNIK MICCRAPI-D-75 DFK-3

• Manufacturer: ART PROZESS & LABORTECHNIK

Used Art Prozess & Labortechnik model MICCRApi-D-75 DFK-3 stainless steel inline homogenizer / disperser. Unit rated 8,000 litre per hour depending on product. Unit direct driven by 7.5kw, 460volt, 3/60, 3510rpm ...

Ss Clad Filter Press 13" X 13" #15026

• Manufacturer: Ss Clad Filter Press

13" x 13" filter press (mfg. Unknown) included two end plates, one screened plate and one frame, on steel base with casters, manal screw closure and cast iron fram, contact parts are stainless steel on bronze som...

25 Wide X 36 #11956

25" wide x 36" long belt conveyor, mfg. Unknown, features stainless steel and aluminum frame, white neoprene belt, dayton 1/12 horsepower dc drive with variable speed controller, 40" floor height with adjustable ...