Used frames in New Jersey, USA

Dresser Rand 4HHE-VL-3

• Manufacturer: Dresser Rand

Unused 28,000 SCFM Hydrogen Compressor. Manufactured by Dresser-Rand. Model: 4HHE-VL-3. Reciprocating type, 4-stage, 17,000 BHP nominal frame rating. Direct-coupled drive system. Inlet pressure: 305 psi at 100°F....

Scrubber 0.3 m3/h (0.18 CFM) Stainless Steel - IPP# 222968

• Manufacturer: Dickow

exhaust air scrubber, pressure rated -1/0,5bar @ -10/160 degrees C, mounted on a carbon steel frame with a 150 mm diameter stainless steel body scrubber column with carbon steel rushig rings pressure rated 6bar@ ...

Niro Mobile Minor

• Manufacturer: Niro
• Model: MOBILE MINOR

Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm ...

Union Process 0-5

• Manufacturer: Union

Used 5HP Union Process Szegvari Attritor. Size 0-5. Type BV. Total capacity approximate 24 gallons. Jacketed bowl 18-1/2" diameter x 21" deep, 1-1/2" diameter shaft with (7) 1" diameter posts. Driven by a 5hp, 3/...

Sandvik 1002

• Manufacturer: Sandvik

ONE USED BELT FLAKER CONVEYOR SYSTEM, MODEL 1002, WPS, CI, TYPE 2; 20" wide X 17' L x .040" SANDVIK 100SA SS BELT. 10-13 FT/MIN SPEED. THE SYSTEM IS A SANDVIK STAINLESS STEEL BELT COOLER FOR THE CONTINUOUS COOLIN...

ALFA LAVAL 105 Sq. Ft.

• Manufacturer: Alfa-Laval

Used Alfa Laval 105 square foot plate and frame heat exchanger.

gemco 3 cu ft stainless steel double cone mixer

• Manufacturer: Gemco

Used 3 cu ft Stainless Steel Slant cone Double Cone Blender. Manufactured by GEMCO. Rated 90#/cu ft maximum density. High speed intensifier bar with 3/1.5 hp, 460 volt motor, 1 hp shell motor drive. Stainless ste...

Burton Corblin P123 LM710 CSH

• Manufacturer: Burton Corblin

Used Burton-Corblin Model P123 LM710 CSH Reciprocating Hydrogen Compressor. 1625 SCFM. Past Used Hydrogen Compressor. Suction: 335PSIG. Discharge: 425 PSIG. Speed: 536 RPM. Absorbed Power: 38.5kW. 75HP Siemens Fr...

Bin 0.011 m3 (0.39 ft3) Stainless Steel 304 - IPP# 225308

• Manufacturer: K-Tron

agitated weigh feed hopper clamped flat top, weld coned bottom agitator driven by approximately a 1 HP, 3/50/230 volt, 1715 rpm motor via 195:1 ratio SEW-Eurodrive gearbox, right angled design drive, 304 stainles...

Centrifuge-Solid Bowl-Decanter 11 kW (14.8 HP) Stainless Steel - IPP# 219895

• Manufacturer: Alfa Laval

duplex stainless steel 80 mm slope sludge density max filling volume 33,4 kg Motor: IP 55 two-stage planetary drive Single thread screw construction material: bowl and hubs 1.4462 stainless steel, screw hub and f...

Rotary Feeder 254 mm (10 in) Stainless Steel 316 - IPP# 200799

wetted parts,and all Body parts 316 SS otary air Lock assembly, with hinged side access. 10" diameter straight through design. @" deeep recessed vanes (7) total. With mechanical seal on driven shaft end. Opposite...

Centrifuge-Disc Bowl 7.5 kW (10.1 HP) - IPP# 99748

• Manufacturer: Disco

disc bowl centrifuge. Separator (3-phase) design. Special design for glucose separation Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check Drive by standard flange mount ...

BURGESS-MANNING 10 HP

• Manufacturer: BURGESS-MANNING

Used Burgess-Manning Blower Driven by a 10 hp motor Mounted in steel frame

Lodige KM600D-3ZMZ

• Manufacturer: Lödige

Comprehensively tested, used Lodige Model KM 600D-3ZMZ 321 stainless steel continuous jacketed ploughshare mixer. Manufacturer: Lodige - (3) stainless steel multiple blade choppers direct driven by 5.5 kW 380 vol...

Eiger 5L H SSE EXD

• Manufacturer: Eiger

Used Eiger Model 5L H SSE EXD stainless steel bead mill. Stainless steel chamber measures approximately 360mm long x 200mm diameter. Unit is driven by 10hp, 420 volt, 3/50 motor. Includes water pump driven by a 3...