Used frames in New Jersey, USA

Union Process 1-S

• Manufacturer: Union
• Model: 1-S

Used 3HP Union Process 1-S Series Laboratory Attritor. Tank capacity 1.5 gallon, working capacity 0.8 gallons. Media volume 1.0 gallons. Jacket tank approximate 7-1/2" diameter x 8-1/2" deep. Missing agitation sh...

Union Process 1SDG

• Manufacturer: Union
• Model: 1SDG

Used 3HP Union Process Szegvari 1-S Series Laboratory Attritor, Model 1SDG. Tank capacity 1.5 gallon, working capacity 0.8 gallons. Media volume 1.0 gallons. Jacket tank approximate 7-1/2" diameter x 9" deep. Dri...

Bag House Dust Collector Carbon Steel - IPP# 705926

• Manufacturer: Nederman MikroPul

(1) cylindrical cartridge filter, fan manufactured by Nedermann, serial # 663, driven by 1.5 kw, 3/50/220/240/380/420 volt, 2800 rpm motor, shaker manufactured by Nedermann, serial # 529, driven by 0.25 kw, 3/50/...

300 Gallon Mixing Tank 300 Gallon Tank #9834

• Manufacturer: 300 Gallon Mixing Tank

300 gallon ss open top sanitary tank, 60" diameter x 24" deep with 6" dish bottom and 1" center bottom discharge with tri-clamp connection and 46" discharge clearance, mounted on 4 load cells by a. H. Emery co, i...

New England Machinery 40 Cft H/e #17072

• Manufacturer: New England Machinery

All stainless steel inclinded conveyor by new england machinery, model 40 cft h/e, serial # 8785, features 106" high maximum discharge height, 20" wide white neoprene conveyor belt with 3. 750" high bolt on 20" w...

WESTFALIA SA14-06-076

• Manufacturer: GEA
• Model: SA

UNUSED Westfalia SA14-06-076 disc bowl centrifuge frame with out bowl. Clarifier (2-phase) design. SN 1662-198. Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check. Drive ...

1,000 LITRE

Used 1000 litre stainless steel liquid container-Internal dimensions 1050 x 900 x 1050 mm-Galvanised steel frame

CIP, 1-Tank, 125 Gallon, S/st, Stork, Pump, #S742968

• Manufacturer: Stork

Stork Stainless steel CIP system, including approximatley 125 gallon stainless steel tank, stainless steel Fristam centrifugal pump driven by approximately 10 HP motor, stainless steel piping, valve clusters, etc...

Union Process Q1

• Manufacturer: Union
• Model: Q1

Used Attritor mill, complete with 304 stainless steel jacketed can, measures 9" diameter x 8-1/2" deep, with 2 piece top cover. Unit has carbon steel jacket with 2" side bottom outlet. Unit is driven by 2 HP Reev...

American Felt & Filter Co Rmc S S 112 #12211

• Manufacturer: American Felt & Filter Co.

Stainless steel (unused) basket filter by american felt and filter co. (newburgh ny) model c s/s 112, serial # nc0548. 7" diameter x 14" long stainless steel basket frame support, hinged lid with four swing bolt ...

Paul O. Abbe RCB-66

• Manufacturer: Paul O. Abbe

Used 55 Cu Ft Paul O. Abbe Rota-Cone SS Double Cone Blender. Model RCB-66. 304 Stainless Steel. Non-jacketed shell 66" diameter x 25" straight side x 45 degree cones. 16" Diameter inlet, 10" diameter outlet. Shel...

Schutte-Buffalo AHM-20

• Manufacturer: Schutte
• Model: AHM-20

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate (2) 48" diameter x 24" wide rotors. Top feed with hopper, bottom discharge. Driven by a 600hp, 3/60/460 volt, 1790 rpm motor. Mounte...

Work Platform 47" X 120" Platform #16507

• Manufacturer: Work Platform

Stainless steel three step work platform with all ss frame and fiberglass decking and steps, 47" wide x 120" long with two 34" x 10" deep steps from floor to main 47" wide x 100" long deck at 24" floor height, sa...

Philadelphia Pg 14 #10041

• Manufacturer: Philadelphia

Philadelphia portable clamp mount mixer, size/ type pg-14, serial # pm83aba0314. Features gear reduced shaft drive, . 25 horsepower motor yielding final rpm of 350, 240/480/3 ph/60 cycle voltage, drive manufact...

Gardner 3.C.D.C.

• Manufacturer: Gardner

Comprehensively tested, used Gardner model 3.C. D.C stainless steel double cone blender. Manufacturer: Gardner. Capacity: Approximately 65 litres. Dimensions: Approximately 600mm diameter X 150mm straight side wi...