Processing » North Dakota

Search By Category

Search By Manufacturer

Building Filters

11

Used engine in North Dakota, USA

  • Trusted Seller
    Food Engineering Limited Cooling Drum

    Food Engineering Limited Cooling Drum

      Food Engineering (Halifax) Limited / MFH Group Cooling Drum. Model CCIR, SN 11343A, Year 2000. Slabbing roll, Slabbing compression drum. SS drum, 39.25 in. wide x 32 in. diameter. Design Pressure 15 psi. Desig...

      Stanton, ND
    • Trusted Seller
      2000 Food Engineering Limited 125

      2000 Food Engineering Limited 125 Gal. Jacketed Mix Tank

        2000 Food Engineering Limited 125 Gal. Jacketed Mix Tank, Model BV 500, SN 11319. Top agitation, w/ 3 blade propeller and 6 blade agitator. Jacket 15 psi @ 212F. Approx. 125 Gal., 33 in. dia. x 34 in. deep, slop...

        Stanton, ND
      • Trusted Seller
        20 HP VRU Screw Compressor

        20 HP VRU Screw Compressor

        • Manufacturer: Aereon

        10 Identical VRU Units Available New Surplus Drawings Attached

        North Dakota, USA
      • Trusted Seller
        Kawasaki 11013-7020 & 110130-7019 Polyurethane

        Kawasaki 11013-7020 & 110130-7019 Polyurethane Air Filters

        • Manufacturer: Kawasaki

        This listing is for TWO new Kawasaki air filters. Will fit Kawasaki engine models: FH601D-FH770D (that use canister style air filters). This includes: 1) 11013-7020 1) 110130-7019 We are asking $28.00 for this s...

        Fargo, ND
      • Trusted Seller
        Speed Queen single pocket dryer

        Speed Queen single pocket dryer 75 lb capacity

        • Manufacturer: Speed Queen

        Speed Queen single pocket dryer 75 lb capacity, Model ST075NFN0NBG3W0000, SN 1901000284, Natural Gas or propane, 165,000 BTU/hr. Last ran natural gas, 100-120 volt, 50-60 Hz, 12 amp, 1 phase, 75 lb. load capacit...

        Stanton, ND
      • Trusted Seller
        2024 Terex/EcoTec TMS320 Mobile Metal

        2024 Terex/EcoTec TMS320 Mobile Metal Separator

        • Manufacturer: Terex
        • Model: TMS320

        Mobile drum magnet & eddy current separator 2024 Terex/EcoTec TMS320 Mobile Metal Separator Heavy duty tracked machine for excellent site mobility Eriez 2 meter wide (79”) high-strength neodymium radial pole drum...

        $460,000 USD

        Get financing

        Est. $8,657/mo

        North Dakota, USA
      • Mag Fan D3500

        Mag Fan D3500

          The Mag Fan D3500 uses magnetic heat to generate high volumes of humidity-free, low emissions heat for almost any large area. This economical heating solution quickly produces a tremendous amount of fast dry heat...

          Fargo, ND
        • Mag Fan XE150

          Mag Fan XE150

            The XE150 series is a clean, environmentally friendly portable heating device. This series is an economical heating solution that generates high volumes of humidity-free, low emissions heat for almost any large ...

            Fargo, ND
          • Mag Fan D8000

            Mag Fan D8000

              The Mag Fan D8000 uses magnetic heat to generate high volumes of humidity-free, low emissions heat for almost any large area. This economical heating solution quickly produces a tremendous amount of fast dry heat...

              Fargo, ND
            • Mag Fan D6000

              Mag Fan D6000

                The Mag Fan D6000 uses magnetic heat to generate high volumes of humidity-free, low emissions heat for almost any large area. This economical heating solution quickly produces a tremendous amount of fast dry heat...

                Fargo, ND
              • Trusted Seller
                2009 Ariel Corporation JGT/2 Two

                2009 Ariel Corporation JGT/2 Two Stage Reciprocating Compressor

                • Manufacturer: Ariel
                • Model: JGT

                Ariel JGR/2 Two stage compressor 8.375 in bore 4.25 inch stroke, 635 psig 4.625 in bore 4.25 in stroke, 1900 psig electric driven, enclosed, skidded

                Williston, ND

              Overview

              Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

              FAQ

              What should I consider when buying used processing equipment?

              Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

              How do I arrange shipping for processing equipment?

              Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

              What is the typical maintenance for processing equipment?

              Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.