Processing » Ohio

Building Filters

63

Used force in Ohio, USA

  • Trusted Seller
    Carr Centritech UniFuge Pilot Single

    Carr Centritech UniFuge Pilot Single Use Centrifuge/Separation System

    • Manufacturer: CARR

    Carr Centritech UniFuge Pilot Single Use Centrifuge/Separation System Used Carr Centritech single use centrifuge separation system, model Unifuge, anodized hard coated T6061 AL bowl, approximately 140mm diameter,...

    Cleveland, OH
  • Trusted Seller
    Sharples Super Helix Centrifuge, Model

    Sharples Super Helix Centrifuge, Model SP725, 316/317 S/S, 10 HP

    • Manufacturer: Sharples

    Sharples Super Helix Centrifuge, Model SP725, 316/317 S/S, 10 HP Used Sharples super helix vertical centrifuge, model SP725, 316/317 stainless steel construction, sanitary design, all contact surfaces polished an...

    Cleveland, OH
  • Royle 2" Rubber Extruder

    Royle 2" Rubber Extruder

    • Manufacturer: Royle

    Item 6008 - One (1) Royle 2.0" 50mm Cold Feed Rubber Extruder, 12:1 L/D, 15:1 G/B ratio, No motor, Reliance 15 HP 460 VAC drive with controls, straight delivery head, forced lube system, individually driven rolle...

    Cleveland, OH
  • NRM 3.5" Cold Feed Rubber

    NRM 3.5" Cold Feed Rubber Extruder

    • Manufacturer: NRM

    One (1) NRM 3.5" 90mm Cold Feed Rubber Extruder, 12:1 L/D, 24.88:1 gearbox ratio, US Motors 75 HP 1750/2100 RPM 500 VDC motor, straight delivery head, forced lube system, power feed roll, feed roller equipped wit...

    Cleveland, OH
  • NRM Autolok 44.5" Hydraulic Tire

    NRM Autolok 44.5" Hydraulic Tire Press

    • Manufacturer: NRM

    Item 5191 - Seven (7) Used NRM 44.5" Autolok Hydraulic Tyre Curing Press, model 350 - 44.5", closing force 350,000 lbs (175 tons), platen size 44.5", mechanical breech lock, standing post inflation, accu-loader, ...

    Cleveland, OH
  • Trusted Seller
    11.8" x .078 SANKYO ROLL

    11.8" x .078 SANKYO ROLL FEEDER 11041

    • Manufacturer: Sankyo

    MODEL: V-230 SERIAL #: V-40672, V-230-014CCW FEED LENGTH: 18-230 MM MATERIAL WIDTH: 4-300 MM MATERIAL THICKNESS: 0-2 MM OR .078 MAXIMUM STROKES: 0-700 REPEAT ACCURACY: +/- 0.030 MAXIMUM GRIP FORCE: 30,000 ...

    $9,950 USD

    Get financing

    Est. $195/mo

    Monclova, OH
  • RMS 4.5" 120mm Pin Barrel

    RMS 4.5" 120mm Pin Barrel Rubber Extruder

    • Manufacturer: RMS

    One (1) RMS 4.5" 120mm Pin Barrel Rubber Extruder, 14:1 L/D, 150 HP 1150 RPM 500 VDC motor, variable straight delivery head, forced lube system, power feed roll, feed roller equipped with external bearings and ad...

    Cleveland, OH
  • 8,000 cfm Schubert Hydro Air

    8,000 cfm Schubert Hydro Air DBS2-4 GA Wet Type Dust Collector

    • Manufacturer: Schubert

    8,000 cfm Schubert Hydro Air DBS2-4 GA Wet Type Dust Collector - 8,000 cfm Schubert Hydro Air DBS 2-4 Wet-Type Dust Colllection System - Suited for flammable / Explosive material - Eliminates sparks and fire ris...

    Brook Park, OH
  • UFS 1.5" Cold Feed Rubber

    UFS 1.5" Cold Feed Rubber Extruder

    • Manufacturer: UFS

    Item 6006-1 - One (1) UFS United Feed Screws 1.5" 38mm Cold Feed Rubber Extruder, 20:1 L/D, 14.5:1 G/B ratio, Siemens 20 HP 1755 RPM 460 VAC motor, AC VFD variable frequency drive, control panel, clamp assembly, ...

    Cleveland, OH
  • UFS 1.5" Cold Feed Rubber

    UFS 1.5" Cold Feed Rubber Extruder

    • Manufacturer: UFS

    Item 6006-2 - One (1) UFS United Feed Screws 1.5" 38mm Cold Feed Rubber Extruder, 20:1 L/D, 14.5:1 G/B ratio, Siemens 20 HP 1755 RPM 460 VAC motor, AC VFD variable frequency drive, control panel, clamp assembly, ...

    Cleveland, OH
  • 3" Addison McKee #FM-70 TTPN,

    3" Addison McKee #FM-70 TTPN, tube cut-off

    • Manufacturer: Addison

    3” Addison McKee #FM-70 TTPN Tube Cut-Off Addison McKee single cut tube shearing / cutoff machine with pre-notch feature Model: FM-70 TTPN Capabilities Include: Capabilities of single cut operations for: Radius e...

    Brook Park, OH
  • Davis Standard 2 1/2" Extruder

    Davis Standard 2 1/2" Extruder

    • Manufacturer: Davis-Standard

    One (1) DS Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25DSREV, 20:1 L/D, 17.26:1 G/B ratio, Toshiba 40 HP 1170 RPM 460 VAC motor, VFD variable frequency drive, control panel, clamp assembly, fo...

    Cleveland, OH
  • Davis Standard 2.5" Cold Feed

    Davis Standard 2.5" Cold Feed Rubber Extruder

    • Manufacturer: Davis-Standard

    One (1) DS Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25, 20:1 L/D, 17.26:1 G/B ratio, Reliance 40 HP 1185 RPM 460 VAC motor, VFD variable frequency drive, control panel, clamp assembly, forced...

    Cleveland, OH
  • Trusted Seller
    ITW MULLER 606 BFT OCTOPUS

    ITW MULLER 606 BFT OCTOPUS STRETCH WRAPPING MACHINE

    • Manufacturer: Muller

    PERFORMANCE: MAXIMUM LOAD SIZE: 48" W X 50" L X 80" H (69" DIAMETER) MINIMUM LOAD SIZE: 36" X 36" X 28" H (FILM CLAMP JUSTIFIED) MAXIMUM LOAD WEIGHT: 4,800 LBS (WITH ITW MULLER CONVEYOR) WRAP SPEED: UP TO 100 LOA...

    $5,000 USD

    Get financing

    Est. $98/mo

    Lancaster, OH
  • Trusted Seller
    ITW MULLER 606 BFT OCTOPUS

    ITW MULLER 606 BFT OCTOPUS

    • Manufacturer: Muller

    PERFORMANCE: MAXIMUM LOAD SIZE: 48" W X 50" L X 80" H (69" DIAMETER) MINIMUM LOAD SIZE: 36" X 36" X 28" H (FILM CLAMP JUSTIFIED) MAXIMUM LOAD WEIGHT: 4,800 LBS (WITH ITW MULLER CONVEYOR) WRAP SPEED: UP TO 100 LOA...

    $5,000 USD

    Get financing

    Est. $98/mo

    Lancaster, OH
12345

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.