Used processing machines in Ohio, USA

Dyno-Mill KDL-Pilot Horizontal Media Mill, 5 HP

• Manufacturer: Dyno-Mill

Dyno-Mill KDL-Pilot Horizontal Media Mill, 5 HP Used Dyno-Mill Horizontal Media Mill, Model KDL-Pilot, 1.4 liter jacketed grinding chamber, rated up to 40 kg/hr, with 5 HP XP motor.

Dyno-Mill KDL-Pilot Horizontal Media Mill, 5 HP

• Manufacturer: Dyno-Mill

Dyno-Mill KDL-Pilot Horizontal Media Mill, 5 HP Used Dyno-Mill Horizontal Media Mill, Model KDL-Pilot, 1.4 liter jacketed grinding chamber, rated up to 40 kg/hr, with 5 HP XP motor.

8" x 12" Lehmann Three Roll Mill

• Manufacturer: J. M. Lehmann

8" x 12" Lehmann Three Roll Mill Used Lehmann three roll mill, 8" diameter x 12" wide faced rolls, cored and chromed rolls, manually adjusted first and third rolls, brass end guides, knife discharge.

5' x 4' Paul Abbe Pebble Mill, C/S, Jacketed

• Manufacturer: Paul O. Abbe

5' x 4' Paul Abbe Pebble Mill, C/S, Jacketed Used Paul Abbe Rubber Lined Pebble Mill, 5' diameter x 4' straight side, modern fabricated carbon steel body, jacketed for 14.7 PSI at 250 degrees F, gear and pinion d...

30 HP Kady Mill, S/S, XP

• Manufacturer: Kady

30 HP Kady Mill, S/S, XP Used 30 HP Kady mill, stainless steel rotor stator design, stainless steel cooling coil, lubrication system, 230/460 volt, XP motor.

Hockmeyer Immersion Mill, S/S, Model HCP

• Manufacturer: Hockmeyer

Hockmeyer Immersion Mill, S/S, Model HCP Used 20 hp Hockmeyer Immersion Mill, model 9HCP/DM/4436, stainless steel shaft and blade, 20 hp, 230/460 volt xp motor, with 8" diameter basket, wall mounted column, seria...

Osborn Ram Jolt Molding Machine 722 RA

• Manufacturer: Osborn Ram Jolt Molding Machine

Osborn Ram Jolt Molding Machine 722RA Mfg: Osborn Model: 722 RA Table Size: 28" x 42" Squeeze Cylinder Diamter: 22" Pattern Draw: 16" Jolt Cylinder Diameter: 12" Lifting Pins (LTR): 27"-49" & (FTB) 20"-36....

Pulva Corp Hammer Mill, C/S

• Manufacturer: Pulva

Pulva Corp Hammer Mill, C/S Used Pulva Corp hammer mill, carbon steel construction, gravity feed cover on stand with motor.

Hammer Mill, C/S, 150 HP

Hammer Mill, C/S, 150 HP Used hammer mill, approximately 20" wide, dual feed design with rear mounted power roll feeder, approximately 4" x 20" top gravity feed opening, outboard roller bearings, belt driven with...

Diosna High Shear Granulator, Type P1/6

• Manufacturer: Diosna

Diosna High Shear Granulator, Type P1/6 Used Diosna high shear granulator, stainless steel construction, model/typ P1/6, 1 kW, with (2) bowls, integrated mixers and choppers, 230 volts (50 Hz), serial# 355-161, b...

Alexanderwerk R300 Wet Mill, S/S

• Manufacturer: Alexanderwerk

Alexanderwerk R300 Wet Mill, S/S Used Alexanderwerk grater shredder mill, model R300, stainless steel construction, on base with motor.

20 liter Premier Media Mill Skid System

• Manufacturer: Premier

20 liter Premier Media Mill Skid System Used Premier Mill/IPS milling skid, consisting of, 20 liter horizontal media mill, with ceramic lined jacketed chamber, Urethane lined milling discs, driven by 30 hp, 208-2...

1,200 Liter Tapasys High Shear Mixer, Model RMG-1200

• Manufacturer: RMG

1,200 Liter Tapasys High Shear Mixer, Model RMG-1200 Used 1,200 liter Tapasys Engineering high shear mixer, model RMG-1200, stainless steel construction, 1,200 liter non jacketed bowl with chopper, operator contr...

Jacobson Hammer Mill, C/S, 125 HP

• Manufacturer: Jacobsen

Jacobson Hammer Mill, C/S, 125 HP Used Jacobson hammer mill, type AJAC, size 2424, carbon steel construction, direct couple 125 hp motor, on base.

75 Liter Collette High Shear Granulator, Model Gral75

• Manufacturer: Collette
• Model: Gral-75
• Noise level: 85 dB

75 Liter Collette High Shear Granulator, Model Gral75 Used 75 liter Collette high shear mixer, model Gral75, stainless steel construction, non-jacketed bowl with bowl cart, 7.5/5 hp main mix blade motor, 5/2.5 hp...