Processing » Pennsylvania

Search By Category

Search By Manufacturer

Building Filters

2492

Used processing in Pennsylvania, USA

  • 16" (406 MM) BAR MILL

    16" (406 MM) BAR MILL ROLL FOR 1/2" REBAR

    • Manufacturer: UNITED ENGINEERING

    Inventory id: 10746300900 | Rolls: 2 | Size (dia): 16 | Size (face): 24 | Type (work, intermediate, backup): WORK | Material composition: CAST IRON | Overall length: 63 | Shaft diameter drive end: 6.87 | Shaft d...

    Pittsburgh, PA
  • 1982 36" (914 MM) WIDE

    1982 36" (914 MM) WIDE X 18" (457 MM) DIA. ECOLAIRE TABLE

    • Manufacturer: BAUER GEAR

    Inventory id: 10765300600 | Table width: 36 | Roll face: 36 | Roll diameter: 18 | Length: 38.5 | Drive arrangement: INDIVIDUALLY DRIVEN | Number of rolls: 8 | Roll spacing: 66 | Roll fabrication (solid, hollow):...

    Pittsburgh, PA
  • 1997 26' X 24" WIDE

    1997 26' X 24" WIDE HYTROL MODEL TA BELT CONVEYOR

    • Manufacturer: Hytrol
    • Model: TA

    Inventory id: 20065100000 | Table width: 24" | Roll face: 28" | Length: 26' | Drive arrangement: CENTER DRIVE | Number of rolls: N/A | Roll spacing: 28" BELT SUPPORT ROLLERS | Roll fabrication (solid, hollow): H...

    Pittsburgh, PA
  • 1980 60" (1525 MM) WIDE

    1980 60" (1525 MM) WIDE WEAN/CCI CONTINUOUS HOT DIP GALV LINE

    • Manufacturer: WEAN/CCI

    Inventory id: 20034000000 | Entry coil width max: 60 | Years when upgrades performed: 2011 | Description of upgrades: GALVANIZING SECTION BY CCI | Capacity: 250,000 | Material: GALVANIZED STEEL COILS | Type (no...

    Pittsburgh, PA
  • 16" WIDE MAY FRAN MAGNETIC

    16" WIDE MAY FRAN MAGNETIC CONVEYOR

    • Manufacturer: Mayfran

    16" WIDE MAY FRAN MAGNETIC CONVEYOR CHIP TOTE 723-2913-1 16” WIDE 3’ INFEED LENGTH 56” DISCHARGE HEIGHT 120” L COLUMBIA,TN 38401

    $4,950 USD
    Venetia, PA
  • 21" WIDE ERIEZ MAGNETIC CHIP

    21" WIDE ERIEZ MAGNETIC CHIP CONVEYOR

    • Manufacturer: Eriez

    21" WIDE ERIEZ MAGNETIC CHIP CONVEYOR TUF-TRAC 1222 DOGLEG CP CONVEYOR 6’ INFEED LENGTH 69” DISCHARGE HEIGHT 21” WIDE 208” L 3 HP COLUMBIA,TN 38401

    $7,950 USD

    Get financing

    Est. $156/mo

    Venetia, PA
  • 2014 Revent 724G Gas Double

    2014 Revent 724G Gas Double Rack Ovens

    • Manufacturer: Revent

    Beautiful 2014 Revent 724G gas double rack ovens in stock. Price listed is for ovens fully cleaned, including burner, gas valve, spark rod, flame rod all replaced. Door sweep and gaskets along w/ rack lift bush...

    $18,100 USD

    Get financing

    Est. $355/mo

    Valencia, PA
  • Multiple Revent 724G Gas Double

    Multiple Revent 724G Gas Double Rack Ovens

    • Manufacturer: Revent

    Beautiful GIAC control, 2012, 2 of 2013, 2014, 2016, 2 of 2017 Revent 724G gas double rack ovens in stock. Price listed is for ovens fully cleaned, including burner, gas valve, spark rod, flame rod all replaced....

    Valencia, PA
  • Trusted Seller
    Screen, Vibratory, Eriez Syncro-Matic, Triple

    Screen, Vibratory, Eriez Syncro-Matic, Triple #C741607

    • Manufacturer: Eriez

    Eriez Syncro-Matic Vibratory Screen. Triple-deck separator with variable frequency and amplitude. Driven by a 3 HP motor, operates on 480 volts, 3-phase, featuring Z-ring screens.

    New Brighton, PA
  • 115' 40" (1016 MM) FACE

    115' 40" (1016 MM) FACE X 14" (356 MM) DIA., 12 SECTIONS/2 ROLLS PER SECTION ON 5' CENTERS, BIRDSBORO

    • Manufacturer: BIRDSBORO

    Inventory id: 11057300000 | Table width: 40 | Roll face: 40 | Roll diameter: 14 | Length: 115 | Roll spacing: 60 | Roll fabrication (solid, hollow): HOLLOW | Roll bearing type (roller, sleeve): ROLLER | Motor hp...

    Pittsburgh, PA
  • 2017 19' INDIVIDUALLY DRIVEN ROLLER

    2017 19' INDIVIDUALLY DRIVEN ROLLER TABLES, 23-1/2" FACE X 9-1/2" DIA HOLLOW ROLLS

      Inventory id: 20053700000 | Table width: 23.62 | Roll face: 23.62 | Roll diameter: 9.5 | Length: 18'-11" | Drive arrangement: INDIVIDUALLY MOTOR DRIVEN | Number of rolls: 3 | Roll spacing: 59 | Roll fabrication ...

      Pittsburgh, PA
    • 1993 90 FEET OF INDIVIDUALLY

      1993 90 FEET OF INDIVIDUALLY DRIVEN ROLLER TABLES FOR ANGLES, CHANNELS, FLATS (NCO)

      • Manufacturer: Simac

      Inventory id: 20081402900 | Roll face: 31.5 | Roll diameter: 10.5 | Length: 90 FEET

      Pittsburgh, PA
    • 70 TON PER HOUR BILLET

      70 TON PER HOUR BILLET REHEAT FURNACE

        Inventory id: 20090300400 | Capacity (tph): 70 TON PER HOUR | Manufacture: SMS / MEER

        Pittsburgh, PA
      • 2012 BILLET RECEIVING TABLE

        2012 BILLET RECEIVING TABLE

        • Manufacturer: SMS / MEER

        Inventory id: 20090300100 | Table width: 40 FT WIDE | Length: 40 FT LONG | Previous use: BILLETS ARE REMOVED FROM THE TABLE WITH A LIFTING ARM THAT LIFTS THE BILLET FROM THE TABLE AND SETS IT ON A FURNACE FEED R...

        Pittsburgh, PA
      • 2012 MUELLER AT40-F-20 HEAT EXCHANGER

        2012 MUELLER AT40-F-20 HEAT EXCHANGER

        • Manufacturer: Mueller

        Inventory id: 20087800200 | Type or description: PLATE TYPE HEAT EXCHANGER | Previous use: WATER | Length: PACK LENGTH - 14.65" TO 13.76" | Weight: 2710 LBS

        Pittsburgh, PA
      3839404142

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.