Processing » Piedmont

Search By Category

Search By Manufacturer

Building Filters

1423

Used Processing in Piedmont, Italy

  • Trusted Seller
    Auction
    DEMAG - INTELECT 100/420-310 -

    DEMAG - INTELECT 100/420-310 - Plastic injection molding machine - 2006

    • Manufacturer: Demag
    • Model: Intelect 100/420-310

    Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mold height: 200 mm Maximum mold height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between column...

    Collegno, Italy
    Visit Auction Website
  • Trusted Seller
    Auction
    DEMAG - ERGOTECH 1000-310 -

    DEMAG - ERGOTECH 1000-310 - Plastic injection molding machine - 1995

    • Manufacturer: Demag
    • Model: Ergotech

    Clamping Force: 100 Ton Holding force: 100 Ton Maximum opening stroke: 500 mm Minimum mold height: 250 mm Distance between plates: 750 mm Plate sizes: 580 × 590 mm Distance between columns: 400 × 400 mm Maximum w...

    Collegno, Italy
    Visit Auction Website
  • Trusted Seller
    Auction
    MORETTO - HOPPER LOADER -

    MORETTO - HOPPER LOADER - Loaders

    • Manufacturer: Moretto

    Approximate full body dimensions: 800 x 6000 x 2300 mm The line consists of 12 MORETTO HOPPER LOADER units. Voltage: 230V Power: 1000W Please note: the information provided has been taken on site and may not corr...

    Collegno, Italy
    Visit Auction Website
  • Trusted Seller
    HTST PLATE PASTEURIZER for liquid

    HTST PLATE PASTEURIZER for liquid products

    • Manufacturer: TAS Impianti

    PLATE PASTEURIZER FOR LIQUID PRODUCTS HTST pasteurizer with plate heat exchanger for continuous pasteurization of liquid products. The machine allows the pasteurization of liquid food products such as milk, beer,...

    Cuneo, Italy
  • Trusted Seller
    TAS Impianti Hot Air Dryer

    TAS Impianti Hot Air Dryer - Our "ES12" model

    • Manufacturer: TAS

    Hot air dryer - Ns. mod. "ES12" The machine was conceived, designed and manufactured with the aim of reducing moisture in granular food products. Entirely made of aisi 304 stainless steel for product contact part...

    Cuneo, Italy
  • Trusted Seller
    TAS Impianti Hot Air Dryer

    TAS Impianti Hot Air Dryer - Our "ES12" model

    • Manufacturer: TAS

    Hot air dryer - Ns. mod. "ES12" The machine was conceived, designed and manufactured with the aim of reducing moisture in granular food products. Entirely made of aisi 304 stainless steel for product contact part...

    Cuneo, Italy
  • 2006 MONLEVI MERIS BERGAMO FRESA

    2006 MONLEVI MERIS BERGAMO FRESA

    • Manufacturer: Monlevi

    MONLEVI SEMI-AUTOMATIC BRIDGE CUTTER WITH DISPLAYS VERY LITTLE USED IN EXCELLENT CONDITIONS UP AND DOWN MOTRIZED DISC TIRE BENCH LOCKING PRICE REAL BARGAIN

    Novara, Italy
  • GMM OSS 38

    GMM OSS 38

    • Manufacturer: GMM

    gmm lexta cutter completely overhauled 1 year ago with new plc in perfect condition real deal

    Piedmont, Italy
  • Trusted Seller
    Auction
    CSC - Buffer tank -

    CSC - Buffer tank - 2019

      Approximate dimensions: D1200 x 2500 mm Consider at least 1400 mm of lateral clearance due to flanges and valves. Capacity: 3000 litres Pressure: 12 bar Warning: the information reported has been taken on board t...

      Collegno, Italy
      Visit Auction Website
    • Trusted Seller
      Auction
      PNEUMOFORE - DS 0550 -

      PNEUMOFORE - DS 0550 - Dryer

        Refrigerant: R134A - Load: 1.25 kg Maximum operating pressure: 16 bar Power: 1.2 kW Approximate dimensions: 1800 x 900 x 1600 mm - both bodies The values shown refer to a single dryer that is part of two connecte...

        Collegno, Italy
        Visit Auction Website
      • Trusted Seller
        Auction
        INGERSOLL RAND - R55N-A10 -

        INGERSOLL RAND - R55N-A10 - Screw Compressor - 2015

        • Manufacturer: Ingersoll Rand
        • Model: R55N

        Maximum operating pressure: 10 bar Power: 55 kW Revolutions per minute: 2990 rpm Dimensions: approx. 2400x1250x2050mm Warning: the information reported has been taken on board the machine and may not correspond t...

        Collegno, Italy
        Visit Auction Website
      • Trusted Seller
        3000x1500 POLI Cast iron surface

        3000x1500 POLI Cast iron surface plate

        • Manufacturer: 3000x1500

        Technical details: 3000 x 1500 x 265 mm | Weight: 2100 kg | Overall dimensions: 3000 x 1500 x 265 mm

        Collegno, Italy
      • Trusted Seller
        5010x2375 Cast iron surface plate

        5010x2375 Cast iron surface plate

        • Manufacturer: 5010x2375

        N.1 U marking line 10 mm Technical details: 5010 x 2375 x 300 mm | Weight: 8000 Kg | Overall dimensions: 5010 x 2500 x 300 mm

        Collegno, Italy
      • Trusted Seller
        FROHN VDFI 8001 HV 640

        FROHN VDFI 8001 HV 640 Steel cut wire for shot peening

        • Manufacturer: FROHN

        Grain size: 0,6 mm - Grain shape: G1 - Hardness: 640 HV - Specification: VDFI 8001

        Collegno, Italy
      • Trusted Seller
        FLOVEX T 8076 B 4

        FLOVEX T 8076 B 4 Heat exchangers

        • Manufacturer: FLOVEX

        Overall dimensions: 800 x 120 x 130 mm

        Collegno, Italy
      34567

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.