Building Filters
Muhlbock wood dryer
Dryer with fans, motors, and control cabinet. All dimensions and operating parameters are as shown in the photos.
Froling 200 KW biomass stove – new lining
Furnace with a heating capacity of 200 kW TYPE Lambdamat FWT 200 Year 1996 Fueled by biomass, bark, wood chips, and sawdust. New lining!!!
$3,378 USDSzymiszów, Poland
Cells
5 cells Inlet 30 x 30 cm Motor 0.75 kW – Width 75 cm – Depth 40 cm – Height 72 cm Cells are available for viewing and purchase in our warehouse by appointment – please contact us.
$1,407 USDSzymiszów, Poland
Ash conveyor, waste removal from the Ż 34 furnace
Length: 4.50 m Screw diameter: 180 mm Outer diameter: 210 mm Motor with geared motor: 1.1 kW
$3,378 USDSzymiszów, Poland
Kohlbach biomass stove 400 KW heating power 29
Furnace with 400 KW heating power TYPE K 8 - 400 Furnaces for biomass, bark, woodchip, sawdust. Fuel feeder Heat exchanger from 2009
Szymiszów, Poland
A cell with a screw feeder for feeding fuel to the furnace
Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm
$2,815 USDSzymiszów, Poland
Moving floors, scraper conveyors for furnaces
Single, double or triple scraper floors. We have pulling as well as pushing scrapers, depending on your needs. Scrapers range in length from 4 m to 7.50 m, width from 1.60 m to 2.10 m
Szymiszów, Poland
Expansion vessel for furnace, buffer, capacity 1000 l
Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm
$704 USDSzymiszów, Poland
Buffers, hot water tanks, capacity 18,000 l
Buffer with a capacity of 18,000 liters Height 458 cm Wall thickness 6 mm Diameter without insulation 2500 mm Diameter with insulation 2900 mm Two hot water buffers, sealed, freshly dismantled due to replacement ...
Emergency cooler for 3.5 MW furnace
A total of 8 fans, with high-performance coolers underneath. Cooler connections with 80 mm pipe flanges. Two segments, one segment will cool 1750 kW.
Atlas Copco GA 55 13 compressor
- Manufacturer: Atlas-Copco
- Model: GA 55
TYPE GA 55 Pressure 10 bar Engine 55 KW Year 2000
Szymiszów, Poland
Gas furnace (natural gas) 4 MW
TYPE LLR 4000 4 MW furnace Year 1999 Maximum flow temperature 120°C, maximum pressure 6 bar Used very little, only for cleaning the two adjacent biomass furnaces The furnace is in very good condition, as shown in...
Urbas biomass furnace, rated power 5 MW, typed at 3.5 MW
Year 2002 Water temperature: 110 degrees Celsius, pressure: 6 bar Power: 5.0 MW, rated at 3.5 MW due to regulations and the lack of an electrostatic precipitator Delivery: late April – May 2026
Szymiszów, Poland